Erwin Junker Maschinenfabrik
Products
World market leader in grinding with CBN
26
Erwin Junker Maschinenfabrik GmbH
High speed grinding machines
JUMAT 1S - Cylindrical grinding machines
| Workspace |
|
| 250 mm | |
| 300 mm | |
| Machine characteristics |
|
| 18000 kg | |
| mm | |
| mm | |
| kg | |
| mm |
Unbeatable cycle time for complete worm shaft grinding process
The high-speed grinding machine JUMAT 2000 grinds single-start and multi-start worm shaft profiles from blank. The electroplated profile grinding, which is used for pre-grinding, enables a high cutting capacity and is ideal to process both soft and hard materials. During the subsequent finish-grinding with corundum, the gears are finalized. Thanks to the geometry calculation of the single-tooth grinding wheel, the grinding medium is perfectly designed for the thread profile of the workpiece.
If the worm shaft has specific surface requirements, a second grinding spindle with an additional polishing wheel is used. This three-stage process with an integrated deburring station facilitates the production of finished worm shafts in a single clamping process.
The high-speed grinding machine JUMAT 2000 grinds single-start and multi-start worm shaft profiles from blank. The electroplated profile grinding, which is used for pre-grinding, enables a high cutting capacity and is ideal to process both soft and hard materials. During the subsequent finish-grinding with corundum, the gears are finalized. Thanks to the geometry calculation of the single-tooth grinding wheel, the grinding medium is perfectly designed for the thread profile of the workpiece.
If the worm shaft has specific surface requirements, a second grinding spindle with an additional polishing wheel is used. This three-stage process with an integrated deburring station facilitates the production of finished worm shafts in a single clamping process.
