KEYENCE
Products
314
KEYENCE Deutschland GmbH
Stamping and marking equipment
Tintenstrahl- Industriedrucker
INTELLIGENT. AUTOMATIC. RELIABLE.
1. automatic troubleshooting - self-diagnosis with automatic cleaning function: At the touch of a button, the printer starts self-diagnosis and automatically selects the most suitable cleaning method. Cleaning is only performed when necessary to keep the printer in excellent condition.
2. LONGER LIFE - RESISTANT TO DIRECT AND WATER: The entire printer - not only the control unit, but also the print head and touch panel - is IP55 classified, making it both waterproof and dustproof. The robust housing provides protection against impacts and reduces the frequency of malfunctions.
3. ADAPT THE PICTURE IMAGE WITH THE ADD-ON CAMERA: The add-on camera can be used to adjust the print image. The additional use of the touch panel is not necessary.
Translated with DeepL
1. automatic troubleshooting - self-diagnosis with automatic cleaning function: At the touch of a button, the printer starts self-diagnosis and automatically selects the most suitable cleaning method. Cleaning is only performed when necessary to keep the printer in excellent condition.
2. LONGER LIFE - RESISTANT TO DIRECT AND WATER: The entire printer - not only the control unit, but also the print head and touch panel - is IP55 classified, making it both waterproof and dustproof. The robust housing provides protection against impacts and reduces the frequency of malfunctions.
3. ADAPT THE PICTURE IMAGE WITH THE ADD-ON CAMERA: The add-on camera can be used to adjust the print image. The additional use of the touch panel is not necessary.
Translated with DeepL
3-Achsen CO2 Beschriftungslaser
|
Marking system
KEYENCE Deutschland GmbH
Stamping and marking equipment
Series ML-Z from KEYENCE offers the following features:
1. equipment costs and INSTALLATION: The 3D-Lasermarkiersystem ML-Z determines the correct focus for any height within a range of 42 mm. There is no need to install a complex, sensitive device to adjust the marking system for product replacement or other object altitude changes.
2. A large, 300 x 300 mm marking area with unprecedented quality of marking: Typical applications in the wide areas mark require either the installation of several markers or a X / Y stage, the select object to Procedure. The large, 300 x 300 mm marking area reduces the installation costs because no additional marking systems and mechanical devices are required.
The variable focal range and the variable light spot size also provide a uniform marking precision marking throughout the range.
3. wide range of LASERMARKIERFUNKTIONEN: the narrow point of light is suitable for the marking of small objects or of fine lines, such as on electronic components. The 3-axis laser controller corrects deformations and displacements, which can be caused by a slightly incorrect alignment during installation. The narrow point of light enables a uniformly and precisely placed markers in the Centre, as well as in the periphery of the select field.
1. equipment costs and INSTALLATION: The 3D-Lasermarkiersystem ML-Z determines the correct focus for any height within a range of 42 mm. There is no need to install a complex, sensitive device to adjust the marking system for product replacement or other object altitude changes.
2. A large, 300 x 300 mm marking area with unprecedented quality of marking: Typical applications in the wide areas mark require either the installation of several markers or a X / Y stage, the select object to Procedure. The large, 300 x 300 mm marking area reduces the installation costs because no additional marking systems and mechanical devices are required.
The variable focal range and the variable light spot size also provide a uniform marking precision marking throughout the range.
3. wide range of LASERMARKIERFUNKTIONEN: the narrow point of light is suitable for the marking of small objects or of fine lines, such as on electronic components. The 3-axis laser controller corrects deformations and displacements, which can be caused by a slightly incorrect alignment during installation. The narrow point of light enables a uniformly and precisely placed markers in the Centre, as well as in the periphery of the select field.
This description was translated from German to English by "Bing Translator".
Laser Marker / 3-Axis / Hybrid
|
Stamping and marking equipment
KEYENCE Deutschland GmbH
Stamping and marking equipment
3-axis hybrid Laser Marker
The MD-X series is equipped with our newly developed laser oscillator, which combines the properties of YVO4 lasers and fiber lasers. The hybrid label laser is suitable due to high marking quality and high marking speed for a wide range of applications.
- HIGH PEAK POWER (200 KW) AND HIGH OUTPUT (25 W)
- AUTO FOCUS WITH 3-AXIS CONTROL
- BUILT-IN 2D-CODE-LESER
- HIGH RESISTANCE TO ENVIRONMENT
The MD-X series is equipped with our newly developed laser oscillator, which combines the properties of YVO4 lasers and fiber lasers. The hybrid label laser is suitable due to high marking quality and high marking speed for a wide range of applications.
- HIGH PEAK POWER (200 KW) AND HIGH OUTPUT (25 W)
- AUTO FOCUS WITH 3-AXIS CONTROL
- BUILT-IN 2D-CODE-LESER
- HIGH RESISTANCE TO ENVIRONMENT
UV-Laser-Markieranlage / MD-U Serie
|
Marking system
KEYENCE Deutschland GmbH
Stamping and marking equipment
UV marking lasers with 3-axis control
-355nm UV wavelength labels allows high contrast on a variety of materials.
-Damage-free label with less heat.
-The 3-axis control allows also flexible marking of three-dimensional shapes.
-Digital scanners allow very quick labels and increase productivity
-355nm UV wavelength labels allows high contrast on a variety of materials.
-Damage-free label with less heat.
-The 3-axis control allows also flexible marking of three-dimensional shapes.
-Digital scanners allow very quick labels and increase productivity
This description was translated from German to English by "Bing Translator".
