The 5-axis clamp is today's benchmark in 5-sided machining of blanks. The compact machine vice convinces with highest holding forces and an ideal accessibility. Thanks to the positive clamping principle with its toothed clamping jaws, it holds the workpiece gently and securely at the same time - with a clamping margin of just 3 mm. A low clamping pressure prevents deformation when unclamping the machined blank. By simply turning the clamping jaws, which are milled from solid material, the 5-axis clamp enables a clamping range that is almost identical to the base body length. The centering clamp does not require any additional workpiece stops, which means that it is easily accessible from all sides and offers hardly any interfering contours. Thanks to the defined positioning of the workpiece blank in the serration, workpieces can be clamped and unclamped with repeat accuracy - for reworking, for example. Equipped with an integrated zero point fixture, it is set up and dismantled in its own zero point clamping system with a repeat accuracy of < 0.005 mm. In addition to the standard toothed clamping jaws, other jaw types are compatible on the robust base body made of case-hardened steel - such as top jaws for clamping profile and molded parts, or grip jaws for blank clamping of cylindrical components. The 5-axis clamp is available in jaw widths of 46, 77 and 125 mm, with a maximum clamping range of 355 mm. Translated with DeepL