Li-Hsun Industrial
Products
10
Li-Hsun Industrial Co., Ltd.
High speed machining centres
SW-Type
1. Shaft uses alloy steel and hardened through vacuum heat treatment to( HRC60°?62°).
2. Applicable to heavy duty loads.
3. The tailstock pressure of lathe adjusts to five to twelve kilograms. (for reference)
? Waterproof design
2. Applicable to heavy duty loads.
3. The tailstock pressure of lathe adjusts to five to twelve kilograms. (for reference)
? Waterproof design
BC Type
|
Bull Nose Center
Li-Hsun Industrial Co., Ltd.
High speed machining centres
1. The tip of bull nose center uses Cr-Mo steel and hardened to (HRC60°±1°).
2. Uses a combination of taper roller bearing and ball bearing.
3. Applicable to pipes turning.
4. The tailstock pressure of lathe adjusts to six to ten kilograms. (for reference)
2. Uses a combination of taper roller bearing and ball bearing.
3. Applicable to pipes turning.
4. The tailstock pressure of lathe adjusts to six to ten kilograms. (for reference)
NC TYPE
|
Medium Load Live Center
Li-Hsun Industrial Co., Ltd.
High speed machining centres
1. Front end is fitted with angular contact ball bearing, thrust bearing and needle bearing.
2. Suitable for CNC lathes at high-speed and medium-load. The waterproof is maze type.
3. The tailstock pressure of lathe adjusts to five to eight kilograms. (for reference)
? NC-B Type : Long nose live centers are suitable for small workpieces.
2. Suitable for CNC lathes at high-speed and medium-load. The waterproof is maze type.
3. The tailstock pressure of lathe adjusts to five to eight kilograms. (for reference)
? NC-B Type : Long nose live centers are suitable for small workpieces.
NCF TYPE
|
Heavy-Load Live Center
Li-Hsun Industrial Co., Ltd.
High speed machining centres
1. The shaft is made of alloy steel and through vacuum heat treatment (HRC60°±1°). It possesses great rigidity and high durability.
2. Front end is fitted with angular contact ball bearing & thrust bearing. Middle & Rear needle bearing and the waterproof is maze type.
3. The tailstock pressure of lathe adjusts to five to eight kilograms. (for reference)
? NCF-B Type : Long nose live centers are suitable for small workpieces.
2. Front end is fitted with angular contact ball bearing & thrust bearing. Middle & Rear needle bearing and the waterproof is maze type.
3. The tailstock pressure of lathe adjusts to five to eight kilograms. (for reference)
? NCF-B Type : Long nose live centers are suitable for small workpieces.
NCH Type
|
High Speed Live Center
Li-Hsun Industrial Co., Ltd.
High speed machining centres
1. Center shaft is made of alloy steel and hardened through vacuum heat treatment to provide higher rigidity HRC60°±1°
2. Center is fitted with dual ball bearing, thrust bearing and needle roller bearing assembly, the waterproof is maze type.
3. The tailstock pressure of lathe adjusts to five to eight kilograms. (for reference)
? Applicable to high speed lathes and CNC lathes with heavy loads.
2. Center is fitted with dual ball bearing, thrust bearing and needle roller bearing assembly, the waterproof is maze type.
3. The tailstock pressure of lathe adjusts to five to eight kilograms. (for reference)
? Applicable to high speed lathes and CNC lathes with heavy loads.
NCR Type
|
Adjustment Water-Proof Type
Li-Hsun Industrial Co., Ltd.
High speed machining centres
1. The shaft uses alloy steel and hardened through vacuum heat treatment to (HRC60°±1°).
2. Uses the combination of taper roller bearing, thrust bearing and needle bearing.
3. Applicable to medium and heavy loads.
4. The tailstock pressure of lathe adjusts to five to eight kilograms. (for reference)
5. Adjustable to reach original loading capacity after using for a long period of time.
? NCR-B Type : Long nose live centers are suitable for small workpieces.
? Waterproof design
2. Uses the combination of taper roller bearing, thrust bearing and needle bearing.
3. Applicable to medium and heavy loads.
4. The tailstock pressure of lathe adjusts to five to eight kilograms. (for reference)
5. Adjustable to reach original loading capacity after using for a long period of time.
? NCR-B Type : Long nose live centers are suitable for small workpieces.
? Waterproof design
