Search:

thanks for replys, yes i have complete diagram electric and PLC, but no find reference a these symbols, i wish could close for software plc these line and activate the ATC,

Good day, i attachment a photho part of schematic of machin center okk with Meldas300. Inputs ZP22, ZP23 as X1A8-1, X1A8-2 but no find these in the diagram electric, these inputs have huge number to...

I was able to solve, this only was inset with more force the fx61. However now have alarm 20 Nmi Emergency stop, the push bottom is well, switch Doors too, no overtravel.
Some link for electrical...

I good day, when turn on the control the screen only show a cursor blink, no show more, and also sometimes no show nothing.
The lathe was turn off several month, after i changed FX61C identical a...

Hi, this is possible drive the simodrive 611 with pulse and direction, for position control ?,
For what a gsk o other cnc standard can link with simodrive.

Hello good day, have a mazaq quick turn 20 with mazatrol cam T2 control, every few hour any axis run out of control, sometimes the x axis penetrate 2 or 3 milimeters mores, other time the z axis can...

Hello, i have a error similar, Ram Parity error in Fanuc 11M, about i read this are two type of ram, ram in mainboard and ram in pcb insertable in my case ROM/RAM A16B-1210-0470, question for the...

Hello, have a Center Moriseiki witth Fanuc 6M control. Can move the X, Y axis, but i no can move the Z axis, but the indicator DRO in screen yes move, but motor Z is stopped. No alarm of servo Z,...

Hello good day, i obtain this alarm in a Fanuc 6M control (604 PC Alarm), checking the manual maintenance, suggest change the pcb (pg51):

Cause ...

good day

For a S series ServoAmplifier tipe A, where the pulse coder goes directly from the servomotor at pcb control.
Your connections with a Fanuc control OM, are the following photo,...