10
FollowersManufacturerMontronix GmbH
Product group Torque measurement system | Torque measurement systems
Product NameSpectraNG/Spectra One with AT100 AccuTorque
Product images
Description
The "non-contact" AT100 AccuTorque torque and force sensor together with the TSTA2 amplifier and connected to a SpectraNG/Spectra One electronic unit is the perfect solution for:
Applied to the spindle, the AccuTorque sensor enables the tool torque to be measured directly.
The AccuTorque sensor enables direct measurement of the torque and the feed force of cutting tools. There are basically three versions available for application on spindles or tool holders. The rotor/stator unit can then wirelessly transmit the measured signals through an air gap of up to 5 mm.
Torque measurement is useful for rotating tools where meaningful performance measurement is not possible. AccuTorque is particularly suitable for thread cutting processes and multi-spindle applications and is used, among other things, to check the thread depth. The direct detection of the feed force enables a reliable "missing" detection. Another component of the AccuTorque sensors is an amplifier for signal processing. Its housing corresponds to protection class IP67 and can be installed in the wet area of the machine. The amplifier is connected to the stator of the sensors via a 5 m long cable. The connection cable from the signal amplifier to the electronics unit is available in 15 m or 30 m lengths.
- Tool condition detection
- Broken tool detection
- Determination of process states
- Process optimization
- Quality assurance
Applied to the spindle, the AccuTorque sensor enables the tool torque to be measured directly.
The AccuTorque sensor enables direct measurement of the torque and the feed force of cutting tools. There are basically three versions available for application on spindles or tool holders. The rotor/stator unit can then wirelessly transmit the measured signals through an air gap of up to 5 mm.
Torque measurement is useful for rotating tools where meaningful performance measurement is not possible. AccuTorque is particularly suitable for thread cutting processes and multi-spindle applications and is used, among other things, to check the thread depth. The direct detection of the feed force enables a reliable "missing" detection. Another component of the AccuTorque sensors is an amplifier for signal processing. Its housing corresponds to protection class IP67 and can be installed in the wet area of the machine. The amplifier is connected to the stator of the sensors via a 5 m long cable. The connection cable from the signal amplifier to the electronics unit is available in 15 m or 30 m lengths.
{{ this.trans('product.manufacturer') }} {{ $parent.product.manufacturer }}
{{ this.trans('product.product_group') }} {{ $parent.product.producttype }} | {{ $parent.product.category.title }} {{ $parent.product.category.title }}
{{ this.trans('product.itemnumber') }} {{ $parent.product.itemnumber }}
{{ this.trans('product.techdata') }}
{{ key }}
{{ key }} {{ value }}
{{ this.trans('product.techinfo') }}
{{ key }} {{ value }}
Description
Product images
{{ this.trans('product.manufacturer') }} {{ $parent.product.manufacturer }}
{{ this.trans('product.product_group') }} {{ $parent.product.producttype }} | {{ $parent.product.category.title }} {{ $parent.product.category.title }}
{{ this.trans('product.itemnumber') }} {{ $parent.product.itemnumber }}
{{ this.trans('product.techdata') }}
{{ key }}
{{ key }} {{ value }}
{{ this.trans('product.techinfo') }}
{{ key }} {{ value }}
Description
Product images