Robotic and automation > Automation for storage and transportation > Scales and meterimg equipment

An industrial company that wants to secure its long-term growth attaches importance to the optimal use of water and additives. Equally important is the recycling of waste water. Proportional dosing with DOSATRON without the use of electricity helps to save the required additives. The water-driven DOSATRON dosing pump ensures correct dosing as well as excellent mixing when filling or refilling with mineral or synthetic oils and when adding biocides, anti-corrosives and emulsifiers.

Water flow...

Safety and environment > Industrial safety products > Other safety equipment

THE BEGINNING OF CLEAN AND ENVIRONMENTALLY FRIENDLY METALWORKING!

NOT A HAZARDOUS MATERIAL! - NOT SUBJECT TO LABELING!

greenCNC UNIfluid spray bottle 500 ml

- for use in manual metalworking processes
- replaces conventional cutting oils
- oil-free, quickly biodegradable
- water soluble, skin and environment friendly
- tested for skin compatibility
- contains no volatile hydrocarbons (VOC)
- harmless for employees

UNIfluid is committed to consistent environmental protection and...

Lubrication, cooling, oils and corrosion treatment > Lubricants and cutting fluids for use on machine tools > Cooling lubricants

greenCNC GRIND SA-HB is a water-soluble cooling lubricant concentrate that has been specially developed for machining non-ferrous, hard and light metals. The dissolution of cobalt from the material is prevented by special inhibitors. Very good cooling and lubricating properties and exhibit very good foaming behavior and air separation capability. Mineral oils are separated very well.

Application:
Special product for grinding non-ferrous metals and non-ferrous alloys, hard metals and light me...

Lubrication, cooling, oils and corrosion treatment > Lubricants and cutting fluids for use on machine tools > Cooling lubricants

greenCNC GRIND HM 10 is a water-soluble cooling lubricant concentrate that has been specially developed for machining carbide as well as glass, non-ferrous and light metals. The dissolution of cobalt from the material is prevented by special inhibitors. Very good cooling and lubricating properties and exhibit very good foaming behavior and air separation capability. Mineral oils are separated very well.

The viscosity can be adapted to the process depending on the application.

Application:...

Lubrication, cooling, oils and corrosion treatment > Lubricants and cutting fluids for use on machine tools > Cooling lubricants

greenCNC CUT SG-B is a water-based, mineral oil-free metalworking fluid with very good cooling and lubricating properties and excellent separation of mineral oils. The product exhibits very good foaming behavior and air separation capability even at high coolant pressures. The dissolution of cobalt and copper from the material is prevented by special inhibitors.

Application:
Machining steel, cast iron, non-ferrous metals and glass (machining of steels, cast alloys, graphite, non-ferrous, har...

Lubrication, cooling, oils and corrosion treatment > Lubricants and cutting fluids for use on machine tools > Cooling lubricants

greenCNC CUT SA-B is a water-based, mineral oil-free metalworking fluid with very good cooling and lubricating properties and excellent separation of mineral oils. The product exhibits very good foaming behavior and air separation properties even at high coolant pressures. The dissolution of cobalt and copper from the material is prevented by special inhibitors.

Application:
Difficult machining aluminum, aluminum alloys, non-ferrous metals and steel/stainless steel (high-alloy, high-heat res...

Lubrication, cooling, oils and corrosion treatment > Lubricants and cutting fluids for use on machine tools > Cooling lubricants

greenCNC CUT SA PLUS is a water-based, mineral oil-free metalworking fluid with very good cooling and lubricating properties and excellent separation of mineral oils. The product exhibits very good foaming behavior and air separation capability even at high coolant pressures.

Application:
Difficult machining aluminum, aluminum alloys and steel/stainless steel (high alloy, high heat resistant, stainless steels/stainless steels, aluminum, aluminum alloys, titanium, titanium alloys, chrome-nick...

Lubrication, cooling, oils and corrosion treatment > Lubricants and cutting fluids for use on machine tools > Cooling lubricants

greenCNC CUT SA is a water-based, mineral oil-free metalworking fluid with very good cooling and lubricating properties and excellent separation of mineral oils. The product exhibits very good foaming behavior and air separation capability even at high coolant pressures.

Application:
Machining steel/stainless steel and aluminum (high-alloy, high-heat resistant, stainless steels/stainless steels, aluminum, titanium, titanium alloys, chrome-nickel alloys such as Inconel, Hastelloy, etc.).

C...

Lubrication, cooling, oils and corrosion treatment > Lubricants and cutting fluids for use on machine tools > Cooling lubricants

greenCNC CUT S is a water-based, mineral oil-free metalworking fluid with very good cooling and lubricating properties and excellent separation of mineral oils. The product exhibits very good foaming behavior and air separation capability even at high coolant pressures.

Application:
Heavy machining steel/stainless steel (high alloy, high heat resistant, stainless steels/stainless steels, high performance stainless steels, titanium, titanium alloys, chrome-nickel alloys such as Inconel, Haste...