Günther Karl GmbH

greenCNC CUT S is a water-based, mineral oil-free metalworking fluid with very good cooling and lubricating properties and excellent separation of mineral oils. The product exhibits very good foaming behavior and air separation capability even at high coolant pressures. Application: Heavy machining steel/stainless steel (high alloy, high heat resistant, stainless steels/stainless steels, high performance stainless steels, titanium, titanium alloys, chrome-nickel alloys such as Inconel, Hastelloy, etc.). Concentration: from 5% Employees/Environment: greenCNC CUT S is free of secondary amines, free of emulsifiers, boron, mineral oil, formaldehyde, bactericides and DCHA. Container: 20 / 60 / 208 / 1000 liters Translated with DeepL

greenCNC CUT SA is a water-based, mineral oil-free metalworking fluid with very good cooling and lubricating properties and excellent separation of mineral oils. The product exhibits very good foaming behavior and air separation capability even at high coolant pressures. Application: Machining steel/stainless steel and aluminum (high-alloy, high-heat resistant, stainless steels/stainless steels, aluminum, titanium, titanium alloys, chrome-nickel alloys such as Inconel, Hastelloy, etc.). Concentration: from 5% Employees/Environment: greenCNC CUT SA is free of secondary amines, emulsifier, boron, mineral oil, formaldehyde, bactericide and DCHA. Containers: 20 / 60 / 208 / 1000 liters Translated with DeepL

greenCNC CUT SA PLUS is a water-based, mineral oil-free metalworking fluid with very good cooling and lubricating properties and excellent separation of mineral oils. The product exhibits very good foaming behavior and air separation capability even at high coolant pressures. Application: Difficult machining aluminum, aluminum alloys and steel/stainless steel (high alloy, high heat resistant, stainless steels/stainless steels, aluminum, aluminum alloys, titanium, titanium alloys, chrome-nickel alloys such as Inconel, Hastelloy, etc.). Concentration: from 5% Employees/Environment: greenCNC CUT SA PLUS is free of secondary amines, emulsifier, boron, mineral oil, formaldehyde, bactericide and DCHA. Container: 20 / 60 / 208 / 1000 liters Translated with DeepL

greenCNC CUT SA-B is a water-based, mineral oil-free metalworking fluid with very good cooling and lubricating properties and excellent separation of mineral oils. The product exhibits very good foaming behavior and air separation properties even at high coolant pressures. The dissolution of cobalt and copper from the material is prevented by special inhibitors. Application: Difficult machining aluminum, aluminum alloys, non-ferrous metals and steel/stainless steel (high-alloy, high-heat resistant, stainless steels/stainless steels, aluminum, aluminum alloys, copper, high-performance stainless steels, nickel and cobalt materials, carbon fiber composites, titanium, titanium alloys, chrome-nickel alloys such as Inconel, Hastelloy, etc.). Concentration: from 6% Employees/Environment: greenCNC CUT SA-B is free of secondary amines, free of emulsifiers, boron, mineral oil, formaldehyde, bactericides and DCHA. Container: 20 / 60 / 208 / 1000 liters Translated with DeepL

greenCNC CUT SG-B is a water-based, mineral oil-free metalworking fluid with very good cooling and lubricating properties and excellent separation of mineral oils. The product exhibits very good foaming behavior and air separation capability even at high coolant pressures. The dissolution of cobalt and copper from the material is prevented by special inhibitors. Application: Machining steel, cast iron, non-ferrous metals and glass (machining of steels, cast alloys, graphite, non-ferrous, hard and light metals as well as glass). Concentration: from 4% Employees/Environment: greenCNC CUT SG-B is free of secondary amines, emulsifier-, boron-, mineral oil-, formaldehyde-, bactericide- and DCHA-free. Container: 20 / 60 / 208 / 1000 liters Translated with DeepL

greenCNC GRIND HM 10 is a water-soluble cooling lubricant concentrate that has been specially developed for machining carbide as well as glass, non-ferrous and light metals. The dissolution of cobalt from the material is prevented by special inhibitors. Very good cooling and lubricating properties and exhibit very good foaming behavior and air separation capability. Mineral oils are separated very well. The viscosity can be adapted to the process depending on the application. Application: Grinding hard metal, glass, non-ferrous and light metals. Concentration: from 3% Employees/Environment: greenCNC GRIND HM 10 is free of secondary amines, free of emulsifiers, boron, mineral oil, formaldehyde, bactericides and DCHA. Container: 20 / 60 / 208 / 1000 liters Translated with DeepL

greenCNC GRIND SA-HB is a water-soluble cooling lubricant concentrate that has been specially developed for machining non-ferrous, hard and light metals. The dissolution of cobalt from the material is prevented by special inhibitors. Very good cooling and lubricating properties and exhibit very good foaming behavior and air separation capability. Mineral oils are separated very well. Application: Special product for grinding non-ferrous metals and non-ferrous alloys, hard metals and light metals. Concentration: from 3% Employees/Environment: greenCNC GRIND SA-HB is free of secondary amines, free of emulsifiers, boron, mineral oil, formaldehyde, bactericides and DCHA. Container: 20 / 60 / 208 / 1000 liters Translated with DeepL

THE BEGINNING OF CLEAN AND ENVIRONMENTALLY FRIENDLY METALWORKING! NOT A HAZARDOUS MATERIAL! - NOT SUBJECT TO LABELING! greenCNC UNIfluid spray bottle 500 ml - for use in manual metalworking processes - replaces conventional cutting oils - oil-free, quickly biodegradable - water soluble, skin and environment friendly - tested for skin compatibility - contains no volatile hydrocarbons (VOC) - harmless for employees UNIfluid is committed to consistent environmental protection and user health, maximum functionality, process reliability and an optimum cost/benefit ratio. UNIfluid is a revolutionary product for very many different applications very low smoke and odor. Superior to most oil or ester based cutting oils or pastes. Health and Environment: The composition of UNIfuid is a combination of materials used as lubricants and lubricants in the food industry. UNIfluid does not contain oil, chlorine, silicone, sulfur, or other ingredients that pose a risk to the user's health or the environment. The product is dermatologically tested. All ingredients are easily biodegradable and pose no danger to the environment. Replaces cutting oils, lubricants and lubricants. Can be used in many metalworking processes, especially manual metalworking. Uses: forming, punching, drilling, turning, milling, cutting, planing, threading, etc. Materials: hardened steel, iron, titanium, copper, brass, aluminum, plastic and many more. Bulk containers available upon request! Translated with DeepL

Repair Gel promotes protection against allergies, cracks, irritation and the like when handling irritants of any kind. Repair Gel facilitates cleaning when handling dirty products. Repair Gel is a silicone-free, invisible skin protection that remains intact for up to 4 hours even after repeated cleaning with soap and water and solvents. Repair Gel allows the skin to retain all its natural functions. Application: Wash and dry hands. Apply gel in approx. hazelnut size and spread well on hands (do not forget fingernails). Leave on for 2-3 minutes. Repeat several times a day, but at least every 4 hours, depending on stress and need. Repair Gel does not contain any greasy substances. Therefore, a greasing care cream should be used 1 x daily (in the evening). Important: Repair Gel does not replace prescribed protective measures such as gloves when coming into contact with toxins, corrosive substances, etc. Ingredients: Aqua, Stearic Acid, Propylene Glycol, Cetyl Alcohol, Polyvinylpyrrolidone, Cocoamidoxide, Glyceryl Stearate, Glycerin, Phenoxyethanol, Formic Acid, Iodopropynyl Butylcarbamate, Polyaminopropyl Biguanide Translated with DeepL

An industrial company that wants to secure its long-term growth attaches importance to the optimal use of water and additives. Equally important is the recycling of waste water. Proportional dosing with DOSATRON without the use of electricity helps to save the required additives. The water-driven DOSATRON dosing pump ensures correct dosing as well as excellent mixing when filling or refilling with mineral or synthetic oils and when adding biocides, anti-corrosives and emulsifiers. Water flow rate: 10-3000l/h Water inlet pressure: 0,3-6 bar Addition rate adjustable from 0,5-5%. Contents: 1 Dosatron (viscous media version), 1 wall bracket, 1 suction hose, 1 operating and maintenance manual Translated with DeepL