HPC 5-axis vise
HPC 5-axis vise: The vise from users for users

The revolution in the field of 5-axis clamping technology.

With the HPC 5-axis vise, a system has been developed that has been thought through from the ground up and adapted to
practice, which meets the requirements of a
skilled worker. From tool-free
quick change of clamping jaws to a clamping force of 50 kN
no wishes remain unfulfilled. But what makes the HPC series so special?

- Clamping jaw change without tools - in less than 5 seconds
- Free (or flexible) positioning of the fixed jaw on the base rail
sowie is also available. flexible)
as well as in the grid 20mm
- Fully enclosed telescopic spindle with basic clamping stroke of 60mm and
optical end position control
- Clamping range adjustment without tools - under 10 seconds
- Clamping force loss-free clamping range of 10 - 1335 mm
- High clamping forces of up to 50 kN. This eliminates the need for pre-testing.
- Plane-parallel support surfaces
- Störkonturoptimiert for 5-axis machining
- Accessories / clamping jaws suitable for HPC and HEC

Accessories / clamping jaws suitable for für HPC and HEC
The user-friendly screwless modular system promises
not only extreme flexibility, but also ensures a reduction of the
Rüst times by up to 90%. This maximizes the spindle availability of the
machining machine and significantly
reduces production costs.

General
A fully enclosed
telescopic spindle acts as the center of the HEC 5-axis clamp,
with which a maximum clamping force of 40 kN can be achieved.
Thanks to the continuously adjustable clamping force, components can be clamped reliably without the need for time-consuming pre-testing,
and a secure fixation of delicate parts is ensured without
deforming them.
The HEC 5-axis clamp owes its stability to its shape, which is adapted to the
application load, and the individual components, which are matched to each other.
Quick-change systems
The clamping jaws can be changed and the clamping range extended
as usual without tools and in a matter of seconds.
This ensures a loss-free clamping range.

Variable fixed jaw
The adjustable fixed jaw allows a relatively free positioning of the
5-axis clamp and leaves almost all
freedoms in the design of the clamping situations.
This allows, for example, a low alignment uncomplicated
set-up of several screw rods next to each other for clamping larger
components.
The plane-parallel support surfaces of the base jaw pairs, the
use of parallel bars without restrictions is made possible.
The hardened function surfaces ensure a reliable
repeat accuracy.
Basic rail system
Depending on the version, the basic rail system is already equipped in the
standard with a variety of interfaces.
This makes them compatible without adaptation to the following systems: SMW:
ZeroAct, APS 140; Schunk NSE; Lang Quick-Point 96; grid plates
Spigot size; 50 mm.
Clamping jaw accessories
With the versatile clamping jaw program (suitable for HPC and HEC)
the HEC 5-axis clamp covers a wide range of workpieces.
- Gripp jaws for machining unmachined parts
- Smooth jaws for machining finished parts
- Pendulum jaws (compensating movement ±25°),
- Pull-down jaws (clamping at precise angles)
- Stör contour-free small part clamping
Various construction höTo avoid unnecessarily restricting the valuable machine traverse path during contour-free 5-axis machining,
the HEC 5-axis clamp is available as standard in three different heights (150mm and 180mm). Translated with DeepL