Application:
Parts cleaning and machine cleaning especially for greasy, oily and complex surfaces. Ideal for cleaning machine tools including cabin, magazine, spindle and gear room, also for retrofitting.
Ideal for cleaning large parts in combination with tub 1000 SRS.

The working principle is based on the high temperature combined with low pressure: At 95°C greasy and ölige contaminants quickly and efficiently. The low pressure is sufficient to remove the soiling without damaging parts. Thanks to various nozzles, even complex surfaces, including deep blind holes and hollow spaces, can be cleaned without any problems and without any residues.

Advantages:
• Significant time savings of idR 80-90%
• Thus reducing expensive machine downtime
• Cost and time-intensive installation and removal of individual parts can be avoided
• Mobile, ie. Can be easily transported from job site to job site
• Self-sufficient: Thanks to the 60-l tank independent of permanent supply of cleaning medium
• Suction of own cooling lubricant possible; allows cleaning with own emulsion without introduction of foreign substances
• Höhere work safety and significantly lower costs than händische cleaning with rags
• Health-protecting
• Völlige renunciation of chemicals, thus reduced procurement and disposal costs
• Less water and waste water
• Thus resource and environmentally friendly

Technical data:
Driveable. Without tub für parts cleaning.
5m hose with lance gun and changeable 600mm spray lance, hose üconnected to the device via a quick-change coupling. Start/Stop operation über the gun. Stepless pressure adjustment.
Water supply without pre-pressure from 60l tank, 5l tank with dosing device for cleaning concentrate, ÜfÜllsicherung, water shortage shutdown, Übertemperatursicherung.
Geräteleistung approx 7.5 bar and 1.8l/min. 10.1 KW, 16 Amp. Translated with DeepL