Application:
Machine cleaning especially for greasy, oily and complex surfaces.
Ideal for cleaning machine tools with their own cooling lubricant incl. cabin, magazine, spindle and gear room.

The SRE-EK is used for thermal sterilization especially of cooling lubricants. The coolant from the tank of the machine tool is sucked in, thermally sterilized and returned to the machine tool. This can extend the life of the coolant and reduce the cost of the coolant and its disposal. The less frequent replacement of coolant or the disinfection in the bypass also means that the machine tools are at a standstill less often. Above all, biocides can be dispensed with, thus increasing occupational safety and reducing sick leave.
The device is mobile and can therefore be transported from machine tool to machine tool.

Advantages of sterilization:
• Without chemicals and without biocides
• Operated in bypass or operated during ongoing production, therefore no machine downtime
• Longer service life of the cooling lubricant = considerable savings for purchase and disposal of the coolant
• Higher occupational safety = lower sickness rates since no chemicals and no biocides
• Mobile, i.e.h. Can be easily transported from machine tool to machine tool

Advantages cleaning:
• Significant time savings of idR 80-90%
• Self-sufficient: Thanks to the 60-l tank independent of permanent supply of cleaning medium
• Suction of own cooling lubricant possible; allows cleaning with own emulsion without introduction of foreign substances
• Significantly lower costs than manual cleaning with rags

The operating principle is based on the high temperature combined with low pressure: At 95°C, greasy and öly soils dissolve quickly and efficiently. The low pressure is sufficient to remove the soiling without damaging parts. Thanks to various nozzles, even complex surfaces up to deep sack holes and cavities can be cleaned without any problems and without any rests.

Technical data:
Drivable. Without collector for parts cleaning. With three heating elements.
5m hose with lance gun and replaceable 600mm spray lance, hose üconnected to the device via a quick-change coupling. Start/stop operation üvia the gun. Stepless pressure adjustment.
Water and medium supply without pre-pressure from 60l tank, 5l tank with dosing device for cleaning concentrate, water shortage shutdown, Temperature control.
Capacity desinfection: 6l/min.  Cleaning:1.8l/min. 7,5bar .10 KW, 16 Amp.