Swing clamps with robust swing mechanism

- top flange type
- with optional integrated pneumatic position monitoring
- double acting
- max. operating pressure 70 bar

Hydraulic swing clamps are used for clamping workpieces where the clamping points must be free for loading and unloading the fixture. This series achieves very high clamping forces even at 70 bar and can be connected directly to the low-pressure hydraulics of machine tools. An additional power unit for the clamping hydraulics is no longer necessary.

With the robust swivel mechanism and the optional position controls, the swing clamps are particularly suitable for:
- Fully automated manufacturing systems with very short cycle times
- Clamping devices with workpiece changeover by handling systems
- Transfer lines
- Testing systems for motors, gears and axles
- Assembly lines
- Special processing machines

With the new integrated pneumatic position control, users save space compared to the previously available position control. The double-acting elements with top flange are offered in four sizes. Because of their compact design, they are partially retractable and achieve very high effective clamping forces of up to 13.3 kN even at 70 bar operating pressure. 

The hydraulic swing clamp is a pull cylinder in which part of the total stroke is used as a swing stroke to rotate the piston. Due to the robust swivel mechanism, the angular position of the clamp is maintained even after a slight collision during loading and unloading of the workpiece or during the clamping process. The angular position of the clamping bar is fixed with a cylindrical pin. The FKM wiper on the piston rod can be protected from coarse and hot chips by the optionally available metal wiper. The version with continuous switching rod is intended for the attachment of a pneumatic or an electric position control (accessory).

Discover our extensive product range at www.roemheld.de/en!