Your solution provider in clamping and handling technology
470
Followers We are exhibiting this product at EMO 2025
ManufacturerROEMHELD
Product group Standard fixture parts and clamping devices
Product NameElectric swing clamps
Technical Info
DC voltage24 V
axial pulling force3 - 9 kN
max. clamping force7 kN
clamping stroke20 mm
swing stroke3 mm
max. clamping time3,5 s
max. clamping arm length150 mm
supply voltage24 VDC
Product images
Description
Electric swing clamps
- top flange, with position and clamping force monitoring
- DC voltage 24 V, minimum energy demand
The electric swing clamp is driven by a brushless DC motor.
The motor speed is transformed by means of a gear and a threaded spindle into the swing and stroke movement of the piston rod.
For swinging the clamping arm by 180°, an axial stroke of only 3 mm is required.
If the clamping arm collides during the swing motion with a workpiece, the mechanism is protected against overload. The direct current motor is automatically and immediately switched off.
When unclamping, the clamping arm always swings back to the off-position.
Power supply
For motor and electronic control a DC voltage of 24 V with a residual ripple of max. 10 % is required. For the DC motor, we recommend the use of a switching power supply with a current output of 15 A per connected electric swing clamp. When operating several swing clamps at the same time, the line is to be enlarged correspondingly. The electronic control has to be supplied by a separate power supply (24 V DC / 100 mA).
Integrated control
The electronic control for the DC motor is on a board in the housing of the electric swing clamp.
After removal of the protection cover for example the clamping force can be adjusted.
Discover our extensive product range at www.roemheld.de/en!
- top flange, with position and clamping force monitoring
- DC voltage 24 V, minimum energy demand
The electric swing clamp is driven by a brushless DC motor.
The motor speed is transformed by means of a gear and a threaded spindle into the swing and stroke movement of the piston rod.
For swinging the clamping arm by 180°, an axial stroke of only 3 mm is required.
If the clamping arm collides during the swing motion with a workpiece, the mechanism is protected against overload. The direct current motor is automatically and immediately switched off.
When unclamping, the clamping arm always swings back to the off-position.
Power supply
For motor and electronic control a DC voltage of 24 V with a residual ripple of max. 10 % is required. For the DC motor, we recommend the use of a switching power supply with a current output of 15 A per connected electric swing clamp. When operating several swing clamps at the same time, the line is to be enlarged correspondingly. The electronic control has to be supplied by a separate power supply (24 V DC / 100 mA).
Integrated control
The electronic control for the DC motor is on a board in the housing of the electric swing clamp.
After removal of the protection cover for example the clamping force can be adjusted.
Discover our extensive product range at www.roemheld.de/en!
Contact Person![]()
Contact request
{{ this.trans('product.manufacturer') }} {{ $parent.product.manufacturer }}
{{ this.trans('product.product_group') }} {{ $parent.product.producttype }} | {{ $parent.product.category.title }} {{ $parent.product.category.title }}
{{ this.trans('product.itemnumber') }} {{ $parent.product.itemnumber }}
{{ this.trans('product.techdata') }}
{{ key }}
{{ key }} {{ value }}
{{ this.trans('product.techinfo') }}
{{ key }} {{ value }}
Description
Product images
Contact Person![]()
Contact request