The automatic drawer system ProFeeder X from EasyRobotics with its up to 10 drawers is perfectly suited for productions from small to large series. It shines not only because of its performance thanks to the included software, but also because of its changeover times. The software, which has been specially created for the ProFeeder X, makes it easier to write the robot programs in the palletizing area. This reduces tiresome programming times and increases productivity at the same time. Structure The automatic drawer system ProFeeder X from EasyRobotics with its up to 10 drawers is perfectly suited for productions from small to large series. With its compact dimensions of 890 x 970 x 1008 mm, the cell can be positioned on almost any machine. Whether 10, 5 or 2 drawers, the ProFeeder X can be adapted to any workpiece in no time at all. Several hole patterns are predrilled on the surface of the ProFeeder X, on which the robot can be placed by Universal Robots or Nachi, for example. This allows the robot its ultimate flexibility. 2 variants are available for the locking system. On the one hand the drawers can be locked by compressed air (Air-Lock), on the other hand a mechanical locking (Mech-Lock) is possible. The locking of the drawers guarantees protection for the operator not to interfere with running processes and at the same time to maintain productivity. Functionality By pressing the release button, the operator confirms that he is opening and loading a drawer to the operator side. If the robot is not working on the drawer at that time, the lock (Air-Lock) opens and the drawer is open. The drawer is now filled with workpieces by the operator. He then closes the drawer again and presses the release button again. This signals to the robot that it can process the drawer. The robot now moves to the drawer and pulls it out independently. Using a gripper from OnRobot or Robotiq, for example, it now grips a raw part. Afterwards the robot clamps it in the machine after removing the finished part. When the processing of the drawer is finished, the operator has the release to unlock and reload the drawer. An optional automatic door is available as a retrofit for almost any of your CNC machines. It is fitted to the door to prevent the robot from having to push the door open by itself. This saves valuable seconds and again increases the productivity of the cell.