Description The SCHUNK KONTEC KSC-F single-acting vises are perfectly suitable for equipping palletizing systems. Due to the modular system, the VERO-S interface and the 160° quick clamping, they can be adapted to new clamping tasks in no time at all. Field of application 3-axis standard machining centers 4-axis vertical machining centers 4-axis horizontal machining centers 5-axis machining centers Advantages – Your benefits Extremely flat design For maximum utilization of the machine room Quick-clamping via torque wrench Easy, quick, and secure workpiece clamping High clamping forces Ensure process reliability during machining Large clamping range High degree of flexibility Lateral drainage slots For drainage of coolant and chips Wide range of applications Suitable for machining of finished and unfinished parts Wide jaw program Optimal adjustment to new clamping tasks Optimum jaw support for O.D. and I.D. clamping due to a very long base jaw guidance Allows high clamping forces at a long service life Clamping by tension No bending of the base body VERO-S interface Versatile range of combinations due to the VERO-S modular system. Even shorter set-up times Options and special information The highly efficient all-rounder for raw and finished part machining The SCHUNK KONTEC KSC-F single-acting clamping vise with fixed jaw is excellently suitable for automated machine loading. They score with a quick-adjustment of the clamping range, flat design, and a low weight. These are the perfect conditions for the use in pallet storage units. The sizes KSC-F 80, KSC-F 125, and KSC-F 160 are particularly designed for the common pallet sizes 320x320 mm, 400x400 mm, and 500x500 mm. It achieves high clamping forces even at a comparably low torque. As the clamping is provided in tension, the bending load on the base body is minimized. A vise is therefore perfectly suitable for the use on the quick-change pallet system from SCHUNK.