Description The patented SCHUNK ROTA FSW quick-change chuck system allows rapid chuck changes up to a size of 630 mm in under three minutes, with excellent repeat accuracy. It can be undone and locked with full process reliability using just one clamping screw. Advantages – Your benefits Chuck quick-change system Minimizing set-up times and costs Actuation only via a screw Easy and user-friendly handling Positioning via flexible taper Simple joining behavior at a run-out accuracy of < 0.01 mm Patented drive Therefore extremely rigid clamping without vibrations Low height Increases the workspace of your machine Flexible adapter with large through-hole Enables machining of large raw material diameters Display of clamping state Maximum operating safety Suitable for external and internal clamping For universal and flexible use All functional parts are ground and hardened High run-out and repeat accuracy Options and special information Versatile in use and easy to retrofit The SCHUNK chuck quick-change system can be retrofitted to almost any lathe. It is suitable both for manual and power chucks. Their actuating force and maximum speed of rotation are retained in full. The low height means the restrictions on the space are kept to a minimum. With its large through-hole, the SCHUNK ROTA FSW can be also used in modern turning centers. Clamping devices that are already in place can be adapted to the system relatively straightforwardly and continue to be used.