Description Pneumatically actuated 2-jaw clamping block with inductive monitoring of the jaw position for an increasing of the safety and for automated applications. Field of application 3-axis standard machining center 4-axis vertical machining center 4-axis horizontal machining center 5-axis machining center Advantages – Your benefits Precision wedge hook clamping force block for top-quality demands Allows excellent machining processes Low height Maximum use of the machine room and maximum rigidity of the system Optimized outside contour For best side access and optimal chip falling Cubic design Ideal for 6-sided machining with 2 set-ups on 4-axis machines High efficiency of the wedge hook system Process-reliable clamping due to high clamping forces Optimized lubrication system Consistently high clamping forces are ensured Base jaws with tongue and groove or fine serration as standard High flexibility in the range of top jaws Optimal jaw support due to the use of a very long base jaw guidance Allows high clamping forces at a long service life All functional parts are ground and hardened Ensures a long service life Options and special information TANDEM KSP plus-IN from SCHUNK are self-centering, pneumatic operated clamping force blocks with inductive monitoring of the jaw position. Due to the inductive monitoring of the jaw position this clamping force block is particularly suitable for fully automated machining processes in which the jaw position of the clamping device is additionally monitored.