Description
Pneumatically actuated 3-jaw power chuck with a large through hole
Field of application
3-axis standard machining center
4-axis vertical machining center
4-axis horizontal machining center
5-axis machining center
5-axis machining center with turning option
Advantages – Your benefits
Precision wedge hook power chuck for highest quality requirements
Allows excellent machining processes
High efficiency of the wedge hook system
Process-reliable clamping due to high clamping forces
Optimized lubrication system
Consistently high clamping forces are ensured
Pneumatic cylinder integrated in the chuck
No additional pancake cylinder is necessary
Mounting via console plate
Adapts quickly and easily to any machine table
High clamping forces at system pressure
Ensure process reliability during machining
All functional parts are ground and hardened
Ensures a long service life
Options and special information
Pneumatic power chucks for stationary use
The pneumatic power chucks ROTA TPS are particularly designed for stationary use. Particularly if there are no hydraulic systems, they are suitable as an adequate replacement due to the integrated pneumatic cylinder. The power chuck ROTA TPS can be adapted quickly and easily to any machine table by using a console plate.
Power transmission of the ROTA TPS is carried out via the proven wedge-hook system. With an air pressure of 6 bar it is already possible to achieve high clamping forces, which can easily be adapted to the particular task.
Description
Pneumatic 3-jaw chuck with a large through hole
Field of application
on conventional lathes
on cycle-controlled lathes
on drill / boring machines
on welding systems
on special machines
Advantages – Your benefits
Precision wedge hook pneumatic power chuck for highest quality demands
Allows excellent machining processes
Very large through-hole
Machining of all standard pipe diameters
High efficiency of the wedge hook system
Process-reliable clamping due to high clamping forces
Optimized lubrication system
Consistently high clamping forces are ensured
Monitoring the opening and closing process
Process-reliable operation of the lathe chuck
Fast ventilation of the pressure chambers
Shorter process times
Pneumatic cylinder integrated in the chuck
Especially suitable for lathes without a hydraulic cylinder
Sealed guideways
Optimum protection against coolant and chips
Air supply via distributor ring
Very simple control of the chuck
High clamping forces at system pressure
Ensure process reliability during machining
Low noise generation
Increased health protection
Corrosion-resistant functional components are hardened and ground on all sides
Ensures a long service life
Options and special information
Powerhouse for machining rods and pipes
SCHUNK’s ROTA TB2 pneumatic power chuck sets a new standard in machining of rods and pipes for the oil industry as well as the mining and construction sectors. Despite the compact outer dimensions, for example, the ROTA TB2 has an extremely large through-hole of up to 560 mm.
With air pressure of 6 bar it is already possible to achieve very high clamping forces of up to 280 kN, which can easily be adapted to the particular task. An anti-corrosive coating applied to the most important functional components of the SCHUNK ROTA TB2 significantly increases the service life.
Description
Pneumatic, 3-jaw, front-end chuck with fast and clamping strokes and a large through-hole for O.D. clamping.
Field of application
on conventional lathes
on cycle-controlled lathes
on drill / boring machines
on welding systems
on special machines
Advantages – Your benefits
Precision wedge hook pneumatic power chuck for highest quality demands
Allows excellent machining processes
Very large through-hole
Machining of all standard pipe diameters
High efficiency of the wedge hook system
Process-reliable clamping due to high clamping forces
Visual safety devices
Maximum operating safety
Optimized lubrication system
Consistently high clamping forces are ensured
Monitoring the opening and closing process
Process-reliable operation of the lathe chuck
Fast ventilation of the pressure chambers
Shorter process times
Pneumatic cylinder integrated in the chuck
Especially suitable for lathes without a hydraulic cylinder
Sealed guideways
Optimum protection against coolant and chips
Air supply via distributor ring
Very simple control of the chuck
High clamping forces at system pressure
Ensure process reliability during machining
Low noise generation
Increased health protection
Corrosion-resistant functional components are hardened and ground on all sides
Ensures a long service life
Options and special information
Powerhouse for machining rods and pipes
SCHUNK’s pneumatic power chuck ROTA TB2-LH sets a new standard in the machining of rods and pipes for the oil industry as well as the mining and construction sectors. Despite the compact external dimensions, the ROTA TB2-LH has an extremely large through-hole of up to 560 mm.
With an air pressure of 6 bar it is possible to achieve very high clamping forces of up to 240 kN, which can be easily adapted to the particular task. An anti-corrosive coating applied to the most important functional components of the SCHUNK ROTA TB2-LH significantly increases the service life.
Description
Pneumatic 3-jaw chuck with a large through hole
Field of application
on conventional lathes
on cycle-controlled lathes
on drill / boring machines
on welding systems
on special machines
Advantages – Your benefits
Precision wedge hook pneumatic power chuck for highest quality demands
Allows excellent machining processes
Large through-hole
Machining of all standard pipe diameters
High efficiency of the wedge hook system
Process-reliable clamping due to high clamping forces
Optimized lubrication system
Consistently high clamping forces are ensured
Pneumatic cylinder integrated in the chuck
Especially suitable for lathes without a hydraulic cylinder
Air supply via distributor ring
Very simple control of the chuck
High clamping forces at system pressure
Ensure process reliability during machining
All functional parts are ground and hardened
Ensures a long service life
Options and special information
SCHUNK ROTA TP self-contained power chucks are equipped with an integrated pneumatic cylinder. The power transmission is carried out via the proven wedge hook system. The chuck contains an air supply system on the distributor ring. Therefore no rotary feed-throughs are necessary.
Particularly on machines without hydraulic clamping cylinders, the ROTA TP and the manual lathe chucks can be easily exchanged.
We use cookies to optimize our website for you and to be able to improve it continuously. By clicking the "Accept" button, you expressly agree to the use of cookies. For further information on cookies, please refer to our privacy policy.