SCHUNK - Gripping and Clamping
Products
337
SCHUNK GmbH & Co. KG Spann- und Greiftechnik
Magnetic chucks
MAGNOS MGT
Description
Magnetic lathe chuck with demagnetization cycle for the almost deformation-free finishing, precision turning or grinding of rings or discs.
Field of application
Lathes
Cylindrical grinding machines
Advantages – Your benefits
3-sided workpiece machining in one set-up
Higher accuracy by setting up once and at best accessibility of the machine spindle
Even permanent magnetic clamping force over the entire workpiece
Low deformation and vibration clamping of the workpieces
Low vibration clamping
Improved surface finishes and significantly increased precision.
Deformation-free clamping
No deformation and inner forces in workpiece due to clamping forces
Control unit compatible with machine control system
Can also be used in automated applications
Mono-block design
Compact and robust design with high rigidity
Clamping within a few seconds
Shortest possible set-up times and a resulting increase in productivity
Unique energy supply for MAG/DEMAG process
Energy-efficient and secure clamping of the workpieces
Options and special information
MAGNOS MGT-IC
MAGNOS MGT-IC magnetic chucks have a laterally separable fast connection for the MAG/DEMAG process. Pole extensions can be fastened in the T-slots and bore holes of the magnetic chucks. Due to the use of pole extensions these chucks allow almost deformation-free clamping.
Magnetic lathe chuck with demagnetization cycle for the almost deformation-free finishing, precision turning or grinding of rings or discs.
Field of application
Lathes
Cylindrical grinding machines
Advantages – Your benefits
3-sided workpiece machining in one set-up
Higher accuracy by setting up once and at best accessibility of the machine spindle
Even permanent magnetic clamping force over the entire workpiece
Low deformation and vibration clamping of the workpieces
Low vibration clamping
Improved surface finishes and significantly increased precision.
Deformation-free clamping
No deformation and inner forces in workpiece due to clamping forces
Control unit compatible with machine control system
Can also be used in automated applications
Mono-block design
Compact and robust design with high rigidity
Clamping within a few seconds
Shortest possible set-up times and a resulting increase in productivity
Unique energy supply for MAG/DEMAG process
Energy-efficient and secure clamping of the workpieces
Options and special information
MAGNOS MGT-IC
MAGNOS MGT-IC magnetic chucks have a laterally separable fast connection for the MAG/DEMAG process. Pole extensions can be fastened in the T-slots and bore holes of the magnetic chucks. Due to the use of pole extensions these chucks allow almost deformation-free clamping.
MAGNOS MTR
|
Magnetic chuck
SCHUNK GmbH & Co. KG Spann- und Greiftechnik
Magnetic chucks
Description
Magnetic lathe chuck for all turning applications for almost deformation-free machining of rings and discs from three sides.
Field of application
5-axis machining center with rotary table and turning option
Lathes
Advantages – Your benefits
3-sided workpiece machining in one set-up
Higher accuracy by setting up once and at best accessibility of the machine spindle
Even permanent magnetic clamping force over the entire workpiece
Low deformation and vibration clamping of the workpieces
Low vibration clamping
Improved surface finishes and significantly increased precision.
Deformation-free clamping
No deformation and inner forces in workpiece due to clamping forces
Control unit compatible with machine control system
Can also be used in automated applications
Mono-block design
Compact and robust design with high rigidity
Clamping within a few seconds
Shortest possible set-up times and a resulting increase in productivity
Unique energy supply for MAG/DEMAG process
Energy-efficient and secure clamping of the workpieces
Options and special information
MAGNOS MTR-IC
MAGNOS MTR-IC magnetic chucks have a laterally separable fast connection for the MAG/DEMAG process. T-slots and bore holes can be machined into the pole plate to accommodate pole extensions. Due to the use of pole extensions these chucks allow almost deformation-free clamping.
Magnetic lathe chuck for all turning applications for almost deformation-free machining of rings and discs from three sides.
Field of application
5-axis machining center with rotary table and turning option
Lathes
Advantages – Your benefits
3-sided workpiece machining in one set-up
Higher accuracy by setting up once and at best accessibility of the machine spindle
Even permanent magnetic clamping force over the entire workpiece
Low deformation and vibration clamping of the workpieces
Low vibration clamping
Improved surface finishes and significantly increased precision.
Deformation-free clamping
No deformation and inner forces in workpiece due to clamping forces
Control unit compatible with machine control system
Can also be used in automated applications
Mono-block design
Compact and robust design with high rigidity
Clamping within a few seconds
Shortest possible set-up times and a resulting increase in productivity
Unique energy supply for MAG/DEMAG process
Energy-efficient and secure clamping of the workpieces
Options and special information
MAGNOS MTR-IC
MAGNOS MTR-IC magnetic chucks have a laterally separable fast connection for the MAG/DEMAG process. T-slots and bore holes can be machined into the pole plate to accommodate pole extensions. Due to the use of pole extensions these chucks allow almost deformation-free clamping.
ROTA NCM
|
Hybrid chuck
SCHUNK GmbH & Co. KG Spann- und Greiftechnik
Magnetic chucks
Description
3 or 6-jaw hybrid chuck that combines the advantages of automatic (pneumatic or hydraulic) centering using 3 or 6 jaws with the deformation-free clamping of Magnetic Clamping Technology for all ferro-magnetic components.
Field of application
on carousel lathes
on mill/turn machines
on special machines
on vertical pick-up lathes
Advantages – Your benefits
Automatic workpiece centering
No manual alignment of the workpiece is necessary
Deformation-free magnetic workpiece clamping
For maximum radial and axial run-out tolerances
High magnetic holding forces
Depending on the workpiece geometry and material, a high cutting performance is possible
For internal and external centering
For universal and flexible use
Optimum dirt sealing, encapsulated centering chuck
Low maintenance costs and high clamping precision ensured
Rear rotary feeder for air and power
Ideal for automatic mode
Standard interface for centering jaws
Centering jaws can be produced from SCHUNK standard chuck jaws
High clamping force due to jaw support
Higher cutting performance, particularly during hard turning
For grinding and hard turning
Ideal for high-precision workpiece machining
For horizontal and vertical machines
Suitable for use with almost every machine tool (turning – milling – grinding)
Constant centering and clamping forces
Process reliable machining
3-sided machining possible due to retractable jaws
Reduced set-up costs, shorter processing times
Options and special information
Hybrid chuck with automatic workpiece centering
In case of the ROTA NCM hybrid chuck from SCHUNK, the user benefits from the synergy of a centering chuck and magnetic clamping technology. The result: ROTA NCM reduces set-up times for pneumatically actuated grinding and turning machines by up to 80%, thereby providing a clearly perceptible productivity boost. Due to the large surface clamping, the workpieces maintain their shape.
Machining can take place from three sides, completely free of vibration and deformation.
3 or 6-jaw hybrid chuck that combines the advantages of automatic (pneumatic or hydraulic) centering using 3 or 6 jaws with the deformation-free clamping of Magnetic Clamping Technology for all ferro-magnetic components.
Field of application
on carousel lathes
on mill/turn machines
on special machines
on vertical pick-up lathes
Advantages – Your benefits
Automatic workpiece centering
No manual alignment of the workpiece is necessary
Deformation-free magnetic workpiece clamping
For maximum radial and axial run-out tolerances
High magnetic holding forces
Depending on the workpiece geometry and material, a high cutting performance is possible
For internal and external centering
For universal and flexible use
Optimum dirt sealing, encapsulated centering chuck
Low maintenance costs and high clamping precision ensured
Rear rotary feeder for air and power
Ideal for automatic mode
Standard interface for centering jaws
Centering jaws can be produced from SCHUNK standard chuck jaws
High clamping force due to jaw support
Higher cutting performance, particularly during hard turning
For grinding and hard turning
Ideal for high-precision workpiece machining
For horizontal and vertical machines
Suitable for use with almost every machine tool (turning – milling – grinding)
Constant centering and clamping forces
Process reliable machining
3-sided machining possible due to retractable jaws
Reduced set-up costs, shorter processing times
Options and special information
Hybrid chuck with automatic workpiece centering
In case of the ROTA NCM hybrid chuck from SCHUNK, the user benefits from the synergy of a centering chuck and magnetic clamping technology. The result: ROTA NCM reduces set-up times for pneumatically actuated grinding and turning machines by up to 80%, thereby providing a clearly perceptible productivity boost. Due to the large surface clamping, the workpieces maintain their shape.
Machining can take place from three sides, completely free of vibration and deformation.
