Description
Modular control units with holding force regulation for magnetizing or demagnetizing of up to eight magnetic chucks.

Advantages – Your benefits
Expandable modular system
Depending on the control unit, up to eight magnetic chucks can be controlled
Various standard versions depending on the case of application
One control unit for all square pole plates with and without status display from SCHUNK
16-step holding force regulation
Allows clamping of thin workpieces and simplifies the alignment of heavier workpieces
Modularly constructed handheld remote control
Allows each magnetic chuck as well as its holding force regulation to be individually controlled
Display of the clamping status via LED
Increasing the safety by knowing whether the workpiece is clamped or released
Display of error codes via LCD display
In the case of malfunctions, the error cause can be found more quickly
Large selection of accessories
The control unit or the magnetic chucks can be quickly and easily adapted to new clamping tasks

Options and special information
Increased user comfort
The modularly designed SCHUNK MAGNOS KEH plus is suitable for all square pole plates from SCHUNK. Three basic versions for the control of one, two, four or eight magnetic chucks and a wide range of different cable and handheld remote controls are sufficient to cover all requirements.

Concerning the selection of a suitable connecting cable, both small magnetic clamping plates with 4-PIN connectors as well as large magnetic chucks with 7-PIN connectors can be actuated. Equipped with connectors, all cables can be quickly and easily exchanged if necessary.

It is also possible to assign vacant slots at any time with additional magnetic chucks. A 16-step holding force regulation process facilitates the alignment of the workpieces and allows for the clamping of thin components.

Description
Magnetic chucks with extremely high holding forces for milling applications as an ideal clamping solution for powerful metal cutting processes with simultaneous 5-sided workpiece machining in a single set-up.

Field of application
3-axis standard machining center
4-axis vertical machining center
4-axis horizontal machining center
5-axis machining center

Advantages – Your benefits
5-sided workpiece machining in one set-up
Higher accuracy by setting up once and at best accessibility of the machine spindle
Even permanent magnetic clamping force over the entire workpiece
Low deformation and vibration clamping of the workpieces
Low vibration clamping
Improved surface finishes and significantly increased precision.
Deformation-free clamping
No deformation and inner forces in workpiece due to clamping forces
Patented status display
Secure clamping and maximum process reliability
Control unit compatible with machine control system
Can also be used in automated applications
Mono-block design
Compact and robust design with high rigidity
The modular principle
Depending on the application or type of machine, the magnetic can be combined or extended in accordance with the modular design principle
Clamping within a few seconds
Shortest possible set-up times and a resulting increase in productivity
Unique energy supply for MAG/DEMAG process
Energy-efficient and secure clamping of the workpieces
Large selection of accessories
Optimal adaptation possibilities in the respective clamping task

Options and special information
Three square pole sizes for highly individual workpiece clamping
The magnetic chucks are each available in three different square pole dimensions. This offers the possibility of individually adjusting the magnetic chuck to its specific clamping task within a larger range of clamping tasks. The decisive factors are the thickness, weight, surface, geometry, and dimensions of the workpiece being machined.
Magnetic chuck type MFRS-A1
MFRS-A1 magnetic chucks with a high compact performance of acting magnetic force are generally sufficient for 80% of all applications.
Magnetic chuck type MFRS-A2
MFRS-A2 plates have an even higher density of magnetic field penetrating into the workpiece. These are used primarily for workpieces with very uneven surfaces (die-cast and forged parts) and thus a larger air gap, as more magnetic field lines stay in contact with the workpiece.

Description
Manual permanent magnetic chucks with parallel pole pitch for clamping of small workpieces and thin parts for precision grinding work on grinding machines.

Field of application
Surface grinding machines
Jig milling machines
Profile grinding machines

Advantages – Your benefits
Even permanent magnetic clamping force over the entire workpiece
Low deformation and vibration clamping of the workpieces
Low vibration clamping
Improved surface finishes and significantly increased precision.
Deformation-free clamping
No deformation and inner forces in workpiece due to clamping forces
Mono-block design
Compact and robust design with high rigidity
Clamping within a few seconds
Shortest possible set-up times and a resulting increase in productivity
Low magnetic field height
Prevents a magnetization of the machining tools

Options and special information

The manual MAGNOS MSC-PM15 magnetic chucks are actuated via a lateral hexagon socket connection. The magnetic clamping force can be continuously adjusted. The low magnetic field height prevents magnetization in the machining tools, allowing very thin and small parts to be processed.

Description
Electro-permanent magnetic chucks with larger parallel pole pitch for clamping of medium-sized and large workpieces on grinding machines.

Field of application
Surface grinding machines
Jig milling machines
Profile grinding machines

Advantages – Your benefits
Even permanent magnetic clamping force over the entire workpiece
Low deformation and vibration clamping of the workpieces
Low vibration clamping
Improved surface finishes and significantly increased precision.
Deformation-free clamping
No deformation and inner forces in workpiece due to clamping forces
Mono-block design
Compact and robust design with high rigidity
Clamping within a few seconds
Shortest possible set-up times and a resulting increase in productivity
Low magnetic field height
Prevents a magnetization of the machining tools

Options and special information
MAGNOS MSC-PM 60 magnetic chucks are connected to the control unit via a lateral connection plug. Due to their large pole pitch, large workpieces can be securely clamped without the magnetic chucks becoming significantly hot.

Description
Electro-permanent magnetic chucks with fine parallel pole pitch for clamping of small workpieces and thin parts for precision grinding works on grinding machines.

Field of application
Surface grinding machines
Jig milling machines
Profile grinding machines

Advantages – Your benefits
Even permanent magnetic clamping force over the entire workpiece
Low deformation and vibration clamping of the workpieces
Low vibration clamping
Improved surface finishes and significantly increased precision.
Deformation-free clamping
No deformation and inner forces in workpiece due to clamping forces
Mono-block design
Compact and robust design with high rigidity
Clamping within a few seconds
Shortest possible set-up times and a resulting increase in productivity
Low magnetic field height
Prevents a magnetization of the machining tools

Options and special information
MAGNOS MSC-PM 62 magnetic chucks are connected to the control unit via a lateral connection plug. The low magnetic field height prevents magnetization in the machining tools, allowing very thin and small parts to be processed.