So, in the last month, did you discover that the issue was?
Just curious.
Dennis
Digital Industries, Motion Control, Machine Tool Systems
Type: Posts; User: Dennis Rech
So, in the last month, did you discover that the issue was?
Just curious.
Dennis
Any chance that what you are describing as a valve is actually an air flow proving switch?
If it is dirty or stuck, the switch will not close and provide a signal to the plasma cutter that it has...
Let's talk about the Torch Height Control.
Did the Hypertherm come with the plasma table or is it a new addition?
Has anyone actually seen the two work together?
How are the two communicating with...
Let's start with the basics because they are often the problem.
Do you have the ground clamp on the material?
Do you have enough air. It should be set at something like 80 or so psi and the...
This applies to sheet acrylic.
Laser will give a very smooth polished edge with no nicks or ripples.
It will also give a slightly tapered edge.
Using a long focal lens, 4 inches instead of 1.5...
I have had the problem. First noticed it when cleaning residue off acrylic with alcohol. The parts cleaned wonderfully, but I noticed crazing the next day. Have had issues with various spray paints....
I will assume that the mill is on a workbench or stand.
I would just fabricate a pan and sit the machine into it.
Perhaps 48 inches wide, 30 inches front to back with a 3 inch lip in front and...
How is it when cutting other products?
If your laser is cutting 1/4 inch acrylic or solid wood easily, the machine is probably working fine.
Plywoods can be tough to cut.
Some of the glues used...
The ShopBot understands G-code also.
It just looks at the suffix on the file to figure out which one to use.
For the most part, if you are using the included Vectrics software, only a few...
If you are doing V-carving, Vectric V-Carve Pro will do exactly what you want.
It costs about $700 and is worth every penny.
It will use any Windows font.
You can engrave with a diamond or use a...
Just out of curiosity, how can anyone "hate" the software that comes with the FSL?
What sort of problems is he having?
A true 40 watt (33 inch long) tube should run a maximum of 16 to 18 ma.
Anything more will shorten tube life much faster than it will increase cutting speed.
A FSE 40 watt hobby unit (really 35...
Mine started by losing a bit of power (10%) and it also made a slight noise like bacon frying.
Five hours later, it was down to 50% power and one hour after that down to 10%.
My experience is that...
There are several methods that you can use.
First, zoom in so you can see the tangent points of the lines.
Highlight the 3/8 inch circle and then position it by using the arrow keys while holding...
Unless the drill is very sharp, there will usually be a small amount of tearing in wood, making a slightly large hole.
Check your feeds and speeds, and perhaps slow the drilling rpm down a bit.
...
I took a look through my old computer files and could not locate Version 4.01.
There was not much reason to keep older copies in that most updates were not reversible.
Once you flash to Version...
It just happens that I bought my FSE 40 watt in Jan 2011.
At the time, the machines came with Version 3.52 of the software.
For machines running XP, there was a fairly time consuming set of...
If you are brave, there are several websites and You Tubes with instructions for adding an external battery to your existing chip.
Here is one:
Reworking the DS1287 / DS1387 RTC chip
[/QUOTE]
I get about 100 emails a week about laser problems (I run a UK based laser forum)of those 60% are slamming FSE and their attitude towards customers from people all round the world.
...
Below is the info from a galvanized sheet metal MSDS.
OSHA regs allow 5mg/cubic meter of air under continuous working conditions.
With the ultra thin coating of electroplated zinc on current...
Many of the older mills have a pair of 1-1/2 inch diameter holes through the castings about a foot under the table.
180521
If your machine has them, just run a couple of one inch pipes through...
Looking at the FSE site, the warranty on the drop down pricing menu for the specs says,
"No extended warranty 1 year excludes consumables/shipping)."
Are they saying that the power supply is a...
It all starts with the customer (or client). Who ever pays the bills gets to be the final word except that the AHJ (Authority Having Jurisdiction-Building Official, Fire Marshall, Electrical...
There are many fields of Mechanical Engineering.
There are heating and air conditioning MEs.
There are plumbing and sprinkler MEs.
MEs work as construction administrators, maintenance...
Hello again, Phil
I agree that an engraving machine is the proper device to use if one is engraving. Unless the part to be engraved is 4 feet long and weighs 60 pounds. Then the engraving shop tell...
I pulled out my notes from the conversation with Onsrud. I told them 6061 T6 and 0.022 depth. They suggested 0.004 as a chipload. With a 60 degree angle and 0.010 tip, the engraving should be about...
Hi Phil.
There is a typo. The rep at Onsrud recommended a chip load of 0.004 per revolution so this would be 72 inches per minute feed rate. At 6000 rpm the feed rate would be 24 inches per minute....
Hello Umesh,
Any chance that you are building a Mirror-o-Matic?
I do a lot of engraving in 6061 T6 aluminum with a cnc bed mill (not a Tormach) that has a 5000 rpm spindle speed and it works...
I made an 11 tpi one out of a broken 5/8 x 11 HSS tap. Cut the broken end off with an abrasive chop saw leaving about 12 cutting edges and ground off two of the three flutes. It worked well except...
Sounds like we both are preaching to the choir.
Last week it was making my own thread mills.
This week its threading fixture jigs with my thread mills.