Anschlussgewinde-Einzelmutter mit 4-Punkt-Kontakt und Einzelgangumlenkung

• ETA+ nut series with total deflection as flange nut, with standard wipers on both sides
.
• Outer geometry of the nut according to DIN for fastening via a flange
.
• Spindle thread ground in accordance with class P1-P5

Translated with DeepL

• Nut series 9414 with Z-baffle as flanged single nut, 3 baffles per baffle piece
.
• Available with and without wiper
.
• Outer nut geometry designed to support high axial loads
.
• Spindle thread ground to class P1-P5
.
• For an accurate design, a specification of the load direction is required. Attention at tensile load please check the strength of the screw connection.

Translated with DeepL

•  Nut series 1214 with single gear reversal as cylinder single nut with 4-point contact, without wiper Outside geometry of the nut designed for installation in a housing
.
• Spindle thread ground to class P1-P5
.
• Miniature ball screws also available with axial clearance
.

Translated with DeepL

Development solutions and components for your application

OEM precision lead screws from Feinmess Suhl are used in numerous industrial applications as well as in research and development. Variant diversity in design and material makes it possible to adapt the lead screws and assemblies to a wide range of environmental conditions, such as radiation, low temperature, vacuum or clean room conditions.

Clean room, vacuum, dry running

Proven drive and positioning solutions up to clean room class ISO 1, HV / UHV / EUV, lubrication fluid up to 10-8, dry lubrication up to 10-11 mbar, etc.

Optics, Photonics, Laser Technology

Proven drive and positioning solutions e.g. for optical adjustment, focus or zoom functions, mechanical-optical equipment for targeting, camera systems, scanners for digitizing R&O images, etc. Translated with DeepL

• Nut series 1516 with single-gear reversal as flanged double nut with 2-point contact, with standard plastic wipers on both sides
.
• Outer geometry of the nut according to DIN for fastening via a flange
.
• Spindle thread ground in accordance with class P1-P5

Translated with DeepL

• Nut series 1416 with single gear deflection as flanged single nut with 4-point contact, with standard plastic wipers on both sides
.
• Outer geometry of the nut according to DIN for fastening via a flange
.
• Spindle thread ground in accordance with class P1-P5

Translated with DeepL

•  Nut series 1510 with single-gear reversal as spring-loaded cylindrical double nut with connecting thread and 2-point contact, without stiffener
.
• Auu;engeometry of the nut designed to be screwed in
.
• Spindle thread ground in accordance with class P1-P5
.

Translated with DeepL

•  Nut series 1412 with single gear reversal as flanged single nut with 4-point contact, with standard plastic wipers on both sides
.
• Outer geometry of the nut for mounting via a flange
.
• Spindle thread precision ground to class P1-P5
• Miniature ball screws also available with axial play

Translated with DeepL

•  Nut series 2412 with end cap deflection as flanged single nut with 4-point contact, with standard plastic wipers on both sides
.
• Outer geometry of the nut for fastening via a flange
.
• Spindle thread precision ground to class P1-P5
• Miniature ball screws also available with axial play

Translated with DeepL

•  Nut series 2422 with end cap deflection as flanged single nut with 4-point contact, with standard plastic wipers on both sides
.
• Outer geometry of the nut for fastening  via a flange
.
• Spindle thread multi-ground according to class P1-P5
• Miniature ball screws also available with axial play

Translated with DeepL

Different material combinations, surface treatment or coating, individual shaping, scaling and labeling, cleaning processes, lubricant-free variants, etc.


Short description:

• Accuracies: up to ISO tolerance class 1
.
• Spindle pitch: up to 0.2 mm
• Spindle diameter: 3 - 100 mm
• Spindle length: max. 300 mm
• Optionally adaptable: length, materials, pitches, profiles, accuracies, bearing seats, surfaces, hardnesses, tolerance classes, coatings, thread forms
.

Translated with DeepL