586,119 active members*
3,473 visitors online*
Register for free
Login Register
TDM Systems Forum

Digital. Experienced. Powerful. - 100% Tool Management

ViaCad / Shark > My 1st Real Parts (draft)

Thread: My 1st Real Parts (draft)

Results 1 to 3 of 3
\r\n\r\n
\r\n
\r\n \r\n
\r\n \r\n
\r\n CNC_Kid\r\n \r\n
\r\n CNC_Kid is offline\r\n\r\n \r\n \r\n Registered\r\n \r\n \r\n\r\n \r\n \r\n \r\n
\r\n \r\n
\r\n \r\n
\r\n
\r\n \r\n
\r\n
\r\n
Join Date
Jan 2006
\r\n \r\n \r\n
Posts
93
\r\n \r\n
\r\n \r\n \r\n
\r\n \r\n
\r\n
\r\n\r\n
\r\n \r\n
\r\n \r\n

\r\n My 1st Real Parts (draft)\r\n

\r\n \r\n \r\n \r\n
\r\n
\r\n
\r\n so, as a newbie, i need CAD to make parts like this. these are not 100% to correct size, but the scale is about right. in general, the outside dia is 1".
\n
\ni am getting more familar w/ the tools as i muck around, etc. to be honest, the Camera tool (pic-to-file using ray trace w/ anti aliasing) is cool, i like this item, not sure if its the non-Pro version, forgot to check before i uninstalled 2d/3d trial and installed Pro.
\n
\nyour comments welcomed.
\nalso, i need some help creating threads on round/tubular/solid parts, eg; the turbine looking thing needs 40tpi on it. i saw some older posts on other tdm/forums about creating a helix and then using that to cut the threads, but i need help with this.
\n
\nClick image for larger version. \r\n\r\nName: 4.jpg \r\nViews: 0 \r\nSize: 23.1 KB \r\nID: 217652Click image for larger version. \r\n\r\nName: 3.jpg \r\nViews: 0 \r\nSize: 11.5 KB \r\nID: 217654Click image for larger version. \r\n\r\nName: 5.jpg \r\nViews: 0 \r\nSize: 19.4 KB \r\nID: 217656\r\n
\r\n
\r\n\r\n \r\n\r\n\r\n
\r\n \r\n \r\n \r\n \r\n \r\n
\r\n
\r\n
\r\n
\r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n
\r\n
\r\n
\r\n\r\n'; pd[1412540] = '\r\n
  • \r\n
    \r\n
    \r\n \r\n \r\n \r\n 01-08-2014, 10:32 PM\r\n \r\n \r\n \r\n \r\n #2\r\n \r\n \r\n \r\n \r\n \r\n
    \r\n\r\n
    \r\n
    \r\n \r\n
    \r\n \r\n
    \r\n mmoe\r\n \r\n
    \r\n mmoe is offline\r\n\r\n \r\n \r\n Member\r\n \r\n \r\n\r\n \r\n \r\n \r\n
    \r\n \r\n
    \r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    Join Date
    Sep 2012
    \r\n \r\n \r\n
    Posts
    1195
    \r\n \r\n
    \r\n \r\n \r\n
    \r\n \r\n
    \r\n
    \r\n\r\n
    \r\n \r\n
    \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n Good work, looks like you are figuring it out. Is that a flywheel of some sort?\r\n
    \r\n
    \r\n\r\n \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    • \r\n'; pd[1412560] = '\r\n
  • \r\n
    \r\n
    \r\n \r\n \r\n \r\n 01-08-2014, 10:59 PM\r\n \r\n \r\n \r\n \r\n #3\r\n \r\n \r\n \r\n \r\n \r\n
    \r\n\r\n
    \r\n
    \r\n \r\n
    \r\n \r\n
    \r\n CNC_Kid\r\n \r\n
    \r\n CNC_Kid is offline\r\n\r\n \r\n \r\n Registered\r\n \r\n \r\n\r\n \r\n \r\n \r\n
    \r\n \r\n
    \r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    Join Date
    Jan 2006
    \r\n \r\n \r\n
    Posts
    93
    \r\n \r\n
    \r\n \r\n \r\n
    \r\n \r\n
    \r\n
    \r\n\r\n
    \r\n \r\n
    \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n no, its used as a baffle. in essence, a fancy exhaust system. that spiral section gets covered w/ a flat disc, etc.\r\n
    \r\n
    \r\n\r\n \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    • \r\n'; // next/previous post info pn[1412420] = "1412560,1412540"; pn[0] = ",1412420"; pn[1412540] = "1412420,1412560"; pn[1412560] = "1412540,1412420"; // cached usernames pu[0] = guestphrase; pu[104911] = "CNC_Kid"; pu[351211] = "mmoe"; // -->

    Threaded View

    1. 01-08-2014, 08:00 PM #1
      CNC_Kid
      CNC_Kid is offline Registered
      Join Date
      Jan 2006
      Posts
      93

      My 1st Real Parts (draft)

      so, as a newbie, i need CAD to make parts like this. these are not 100% to correct size, but the scale is about right. in general, the outside dia is 1".

      i am getting more familar w/ the tools as i muck around, etc. to be honest, the Camera tool (pic-to-file using ray trace w/ anti aliasing) is cool, i like this item, not sure if its the non-Pro version, forgot to check before i uninstalled 2d/3d trial and installed Pro.

      your comments welcomed.
      also, i need some help creating threads on round/tubular/solid parts, eg; the turbine looking thing needs 40tpi on it. i saw some older posts on other forums about creating a helix and then using that to cut the threads, but i need help with this.

      Click image for larger version.  Name: 4.jpg  Views: 0  Size: 23.1 KB  ID: 217652Click image for larger version.  Name: 3.jpg  Views: 0  Size: 11.5 KB  ID: 217654Click image for larger version.  Name: 5.jpg  Views: 0  Size: 19.4 KB  ID: 217656
      Reply With Quote Reply With Quote
    « Previous Thread | Next Thread »

    Similar Threads

    1. looking for a draft horse or team of draft horses
      By glaciallakesmfg in forum MetalWork Discussion
      Replies: 0
      Last Post: 06-07-2013, 04:45 AM
    2. First "real parts" made on the Torus Pro
      By AUSTINMACHINING in forum Novakon
      Replies: 2
      Last Post: 05-30-2013, 04:06 AM
    3. draft
      By dustinwassner in forum Moldmaking
      Replies: 8
      Last Post: 06-27-2010, 03:36 AM
    4. Real, real newbie!!!
      By aggie_67 in forum Uncategorised CAM Discussion
      Replies: 11
      Last Post: 02-04-2006, 07:10 AM
    5. First 'REAL' parts = PICS
      By ninewgt in forum DIY CNC Router Table Machines
      Replies: 7
      Last Post: 11-16-2003, 06:15 PM

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •  

    Forum Rules

    IndustryArena Icon