India ITME 2022

Hall H12.0, booth No. H12B23
December 8 – 13, 2022

India ITME 2022 is an important exhibition for the textile industry and thus offers a central
forum for dialogue within the textile production sector with the relevant supply chain comprising
textile machine building, fibre production, ancillaries and accessories.
For DiloGroup this event is a good oppportunity to inform customers and interested parties
about new developments aimed at improving production technologies with a focus on
needlefelts.
It becomes more evident that the textile industry comes into the focus of regulatory authorities
who push respecting sustainability principles and who initiate a new body of laws. Hence all
industrial sectors are requested to achieve savings in material and energy. The textile machine
building, of course, plays an important role by seizing this initiative and offering solutions for
fibre pulp recycling and reduction of energy, water and ancillaries. DiloGroup has made big
efforts to meet these challenges together with a circle of partner companies. In this regard
focal points of the development work are:
1. Intense Needling
Needling per se is a mechanical production method with a high energy efficiency. For
this reason, the development efforts of DiloGroup aim at producing nonwovens by
“intense needling” instead of water entangling, even for light nonwovens made of fine
fibres for the medical and hygiene sector with an area weight of 30 – 100 g/m². This
would result in a reduction of the environmentally relevant production costs; per
annum to about 1/3 to 1/5 of current.
Despite the prospective advantages of the mechanical intense needling method over
the hydrodynamical, water entanglement is at the moment the most important
production method for low area weights and highest production capacity and is also
offered by the DiloGroup as general contractor in cooperation with partner
companies.

2. “Fibre Pulp Recycling”
Fibrous material in nonwovens and particularly used clothes can be successfully
recycled, if staple length can be conserved in the tearing process. In the classical
tearing process, staple lengths are dramatically reduced and therefore these fibres
can only be used as base material for inferior uses in thermal or acoustic insulation or
in protective textiles, transportation or protective covers etc.
When recycling textile waste in the context of the collection of used clothes, the so
called “filament-saving” tearing using special tearing machines and methods must be
used to produce fibres with longer staple lengths which can be fed to a nonwoven
installation. Hence product characteristics can be better specified and controlled.

3. Additive nonwoven production
The additive production method of the “3D-Lofter” is especially suited for automotive
parts with differently distributed masses; but there may also be potential for
increasing uses in the sector of apparel and shoe production.

4. “IsoFeed”-card feeding
In the field of card feeding, the “IsoFeed” method offers great potential for a more
homogeneous card feeding at the same time reducing the variation in cross-machine
fibre mass distribution and thus the fibre consumption while conserving the end
product quality.
DiloGroup would like to discuss the above mentioned developments of needling technology
as well as modules of Industry 4.0 applications for further digitalization during the Techtextil
exhibition. We will, of course, also inform about the numerous universal and special
applications of the complete nonwovens technology.

The DiloGroup staff look forward to meeting again customers and interested parties within
the textile industry.