Can anyone advise what I'm doing wrong, when making a square only at slow speed, the right angle is as it should be, when moving faster the corners become rounded. The MK3/4 controller and the latest software are installed, the same G-Code on another CNC bench with the same controller but the old mk1 software does not have this error. Images and code added. Thanks in advance.
VDW
Forum
773
Results 1 to 2 of 2
-
03-24-2024, 08:12 PM #1
Registered
- Join Date
- May 2009
- Posts
- 2
The corners of the square are rounded
-
03-24-2024, 09:04 PM #2
Registered
- Join Date
- May 2009
- Posts
- 2
Re: The corners of the square are rounded
"G64 P 0.01" this command solved all the problems. Thank you very much. I was confused by the fact that I have never encountered such a thing with the MK1 software :cheers:
Reply With QuoteSimilar Threads
-
Increased feedrate, getting rounded corners
By manyhats2007 in forum Mach Software (ArtSoft software)Replies: 1Last Post: 07-08-2014, 01:07 AM -
rounded corners when pcb milling
By jpm000001 in forum LinuxCNC (formerly EMC2)Replies: 4Last Post: 04-09-2012, 08:38 PM -
square corners getting rounded off
By SatanKlawz in forum Uncategorised CAM DiscussionReplies: 2Last Post: 06-30-2010, 02:33 AM -
rounded corners
By jc286006 in forum Uncategorised CAM DiscussionReplies: 1Last Post: 06-25-2006, 06:04 PM -
Rounded corners...
By saturnnights in forum SheetCamReplies: 2Last Post: 02-13-2006, 08:06 PM
Tags for this Thread
Posting Permissions
