547,313 active members*
3,100 visitors online*
Register for free
Login Register

Engineering Kompetenz

WBH10C, WBH10 and WBH20 CBN cutting tool materials

Metal cutting materials that machine hard materials with difficult cutting properties heat up with the materials and lose their capacity to cut. In contrast, CBN grades remain hard and maintain their removal capacity. However, the high hot hardness is not the only advantage that the Tübingen-based tool specialist is offering with its new CBN grades. The distinguishing features of these cutting tool materials, which have been developed specifically for turning hardened steels (ISO H), are surface quality, long tool life and process reliability.

Cutting edges with the new MW wiper geometry improve the quality of machined surfaces. This is because the "M" chip formation guarantees controlled chip removal during hard/soft machining. With fine surface structure, excellent coating adhesion, high thermal stability and resistance to oxidisation, the TiAlSiN coating technology ensures up to 100 per cent longer tool life. State-of-the-art engineering and a homogeneous production quality ensure a high level of process reliability. Walter is bringing out the CBN grades in three variants: WBH10C is wear-resistant at high vc, ensuring maximum productivity. WBH10 is the uncoated, more efficient alternative. WBH20 was developed to enable components to be manufactured efficiently and with low wear with a continuous or slightly interrupted cut. The focus throughout is on users with hard ISO H materials up to 65 HRC, primarily those from the automotive industry. A fourth grade, the WBS10, completes the Walter CBN range in the aerospace field. Among other things, it is used for finishing Inconel 718 DA with vc up to 250 m/min.

Responsible for the content of this press release: WALTER Aktiengesellschaft


WALTER Aktiengesellschaft
Derendinger Str. 53
72072 Tübingen
(+49 7071) 7 01-0
(+49 7071) 7 01-2 12

Route planner

Route planner