milling cutting insert / non-ferrous / square

Walter deep parting blade G1042

The Walter G1042 deep parting blades with double-edged GX cutting edge are suitable for grooving and parting off in all common lathes

Facts and advantages:
- secure 4-point clamping mechanism for maximum stability
- new clamping system with self-clamping for even greater reliability
- tool projection adjustable (maximum stability)
- V-guide heights of 26 mm and 32 mm
- for parting off with tool overhang length of up to 60 mm

The new grade for cast iron: P6005-WKK45C – now with an even larger diameter range.

- Up to 100% increase in output at the cutting edge
- Excellent wear resistance with extraordinary temperature resistance
- Excellent wear detection
- Easy selection: The coating corresponds to the ISO colour of the material to be machined
- High degree of process reliability for drilling and withdrawing from deep holes thanks to insert clamping using a non-positive frictional connection

CBN grades WBH10C, WBH10, WBH20 – the new CBN generation for hard machining at the highest level.

- Optimum surfaces thanks to the latest wiper technology
- High process reliability thanks to the latest production technology
- Long tool life thanks to the TiAlSiN coating technology with extremely fine surface structure


Walter Cut MX-System G3011..C..-P / G3041 – multiply your success with four cutting edges.

- Very user friendly thanks to self-aligning tangential screw clamping
- High level of flexibility: All cutting edge variants can be inserted in the same toolholder
- Maximum tool life thanks to the latest Tiger·tec® Silver PVD cutting tool materials


Indexable insert geometry HU5 – optimal metal removal rate with stainless and high-temperature alloys.

- Additional machine capacity as the HU5 geometry enables higher feeds and greater depths of cut (components can be machined more quickly)
- Inserting new components is easier thanks to the universal plate for ISO M and ISO S
- Up to 75% longer tool life thanks to the soft cutting action and Tiger·tec® Silver cutting tool materials

M5130 shoulder milling cutter – Xtra·tec® XT – performance und reliability extend your perspective.

- Maximum stability for optimum productivity and process reliability
- Lower tool costs and minimal administrative effort thanks to universal usability
- No additional finishing operations thanks to exact 90° angle
- Tiger·tec® cutting tool materials guarantee extremely high cutting data
- Excellent handling thanks to improved accessibility
- High number of teeth and small indexable inserts for maximum efficiency


Xtra·tec® XT M5009 face milling cutter – small indexable inserts, high productivity.

- High level of stability – ideal for small machining allowances and variable conditions
- Maximum feeds, tool life and productivity thanks to small indexable inserts and high number of teeth
- High level of process reliability due to tough double-sided indexable inserts
- Very good handling thanks to easily accessible clamping screw at an angle – prevents typical installation mistakes
- Highly cost-effective thanks to low cutting tool material costs


MC232 Perform solid carbide milling cutter – uniquely cost-efficient and can be used universally with ISO P, M and K materials.

- Can be used universally for diverse milling strategies with various different materials
- High level of process reliability thanks to an internal coolant supply – even in the front piece
- Wide range of applications thanks to tools with reduced neck and corner radii
- High level of cost efficiency for small and medium batch sizes

Walter is setting the standards for HSC milling of aluminium alloys

The new M2131 90° ramping milling cutter from Walter AG is equipped with a PVD-coated insert variant that is manufactured using the HiPIMS method.

"HiPIMS" stands for "High Power Impulse Magnetron Sputtering". This physical process produces extremely dense and smooth PVD coatings. Advantages of the insert coating: Less friction and build-up on the cutting edge, higher resistance to flank face wear and very stable cutting edges. The benefit for the user: Maximum metal removal rates and long tool life! With cutting depths of 15 or 20 mm, the HiPIMS-coated inserts are ideal for ramping and pocket milling.

The M2131 is impressive due to its high level of concentricity. The inserts are provided with integrated protection against centrifugal force. Inner coolant channels, which are suitable for both emulsion and minimum quantity lubrication, complete the precisely designed tool features. Increases in tool life of up to 200 percent can therefore be effortlessly achieved. The M2131 ramping milling cutter from Walter AG is particularly suitable for the HSC machining of aluminium materials, as well as for current aluminium-lithium alloys.

G1011 / G1011-P monoblock tool
​​
The G1011 monoblock tool for radial grooving, parting off and groove-turning is suitable for use in all common lathing centres. These new grooving tools have been developed to offer maximum stability in grooving operations.

Facts and advantages:
- state-of-the-art tool technology for grooving and parting off
- clamping screw accessible from above and below
- low tool head height for easy chip removal
- for grooving, parting off and grooving
- grooving to a cutting depth of up to 32 mm
- parting off to a diameter of up to 65 mm

Product range expanded with new insert

The new XNGX0705ANN-F67 finishing insert represents a significant expansion to the indexable insert range offered by precision tool manufacturer Walter AG.

These inserts have been specifically developed for the Walter BLAXX M3024 heptagon face milling cutter, enabling it to now be used for finishing operations. The large number of cutting edges – 2 + 2 on the new finishing inserts and 16 on the roughing inserts– ensures high cost efficiency. Additional features of the new negative indexable inserts include excellent process reliability and soft cutting action due to the positive cutting edge geometry.

These new finishing inserts open up an even wider range of applications for users of the Walter BLAXX M3024 heptagon face milling cutter. Semi-finishing and finishing operations can be combined into a single operation using a single tool – without adjusting the finishing cutting edges. This reduces the number of tools required and also reduces machining time by minimising time spent changing and adjusting tools. This combination of milling cutter and indexable inserts is exceptionally well-suited to industrial series production of components such as exhaust turbochargers or turbine blades, or any other components made from stainless steels, cast materials or steel.

eXtra performance – thanks to the new grade: Tiger·tec® Silver WSM45X

High temperature resistance combined with high wear resistance, toughness and phenomenal hardness: These are the key features of the new inserts in the Tiger·tec® Silver WSM45X grade, which can boost performance by up to 67% more than other comparable tools.

The special Tiger·tec® Silver surface treatment and the high-performance substrate ensure maximum process reliability when working with materials that have difficult cutting properties, such as titanium alloys. The unique Al2O3 coating enables users to increase their productivity when machining – especially when using materials that are difficult to cut. The surfaces are also extremely flat, which help to significantly reduce built up edge. Yet another benefit of the two-tone Tiger·tec® Silver coating is that it allows users to identify wear quickly and thus make sure that all cutting edges are used efficiently.

The indexable inserts in the Tiger·tec® Silver WSM45X grade are available for all popular Xtra·tec® and new M4000 face and shoulder mills, and the Walter F2334 copy milling cutter. WSM45X is also particularly well-suited to machining stainless steels (ISO M) and difficult-to-cut materials (ISO S). Typical components include exhaust-gas turbo chargers, turbine blades and titanium frames for use in the aerospace industry.

Tiger▪tec® Gold – the new technology platform from Walter. Go for better, go for Gold.

With Tiger▪tec® Gold, Walter's high-performance milling tools are achieving an unprecedented level of productivity:

- Significantly longer tool life due to optimised wear characteristics
- Optimum cutting data due to a reduction in visible wear rate
- Maximum process reliability thanks to the tough cutting edge
- Gold-coloured top layer provides optimum wear detection

MD133 Supreme milling cutter family – specially designed for the dynamic milling strategy

- High process reliability in unmanned machining
- Maximum productivity due to optimal metal removal rate with reduced machining times
- Maximum tool life as the entire cutting length is used and wear behaviour is uniform
- High level of flexibility thanks to various groove widths and corner radii with one tool diameter
- No problems working with difficult-to-cut materials or under unstable conditions (machine, workpiece, clamping)

M4003 face milling cutter with new system indexable insert – four cutting edges for one-of-a-kind surfaces.

High level of cost efficiency:

- System indexable insert suitable for universal use
- Reduced procurement and inventory costs
- Four cutting edges per indexable insert
- Reduction of machining steps by combining roughing and finishing

Concept requiring minimum resources:

- CO2-compensated production thanks to climate protection projects
- Low power requirement thanks to highly positive geometries

Indexable inserts maximise efficiency.

Since their launch at AMB 2012, Walter's LNHU... indexable inserts with a fully ground circumference have repeatedly proven themselves in various milling applications.

They can be used in F5041, F5141 and F5241 tangential Walter BLAXX shoulder milling cutters as well as porcupine milling cutters and adjustable cartridge cutters, and have been gradually developed to become a system insert. Now Walter AG is adding a new sintered variant which, according to Walter, is primarily characterised by its efficiency. The new LNMU... indexable inserts with L55T geometry will initially launch on the market in Tiger·tec® Gold, grade WKP35G and Tiger·tec® Silver, grades WKP25S, WK45S and WKK25.

As with the previous LNHU... ground indexable inserts, the new range has four cutting edges on each circumference-sintered insert, displaying extremely high levels of concentricity and run-out accuracy when used in Walter BLAXX milling cutters. Further key features – according to the Tübingen-based precision tools manufacturer – are their soft cutting action(which is enabled by helical cutting edges), their high feeds and precise 90° approach angles. Additional features of note include the high process reliability of the sintered indexable inserts due to their tangential alignment in the milling cutter, in addition to their high efficiency.

Customer solutions in next to no time

Walter is expanding its range of products that can be ordered using the Walter Xpress fast delivery service to include indexable inserts.

Until now, the special custom solutions that customers could order using the service had been limited to round tools and indexable insert bodies/carriers, and the tools had to be 'close to the standard tool'. Walter now offers its customers the benefits of Xpress for indexable inserts too, especially regarding short delivery times – three weeks for indexable insert special tools and four weeks for indexable inserts. Having short replenishment times aims to reduce the number of tools customers have in circulation and consequently cut their costs. They also help to ensure a higher degree of certainty when planning.

The first indexable inserts to be available via Walter Xpress are the high-performance P600 inserts (orders of 10 to 200 pieces), which have a diameter of between 12 and 37.99 mm and are suitable for holes with a tolerance of IT8 or IT9 – in intermediate sizes or with a special shoulder design (e.g. land or radius). Not forgetting the four-edged indexable inserts in the MX Cut system (orders of 10 to 50 pieces), which have a maximum cutting depth of 6 mm and a cutting width of between 1 and 3.3 mm – in intermediate sizes with a full radius, straight edge or lands between 30 and 50°. Both types of indexable insert can be ordered from your Walter contact partner or via the online form in the Xpress area of the Walter website.