493,322 active members
9,360 visitors online
Register for free
Login Register

Assfalg

Products
EDG 213 | EDG 1226
EDG 213 | EDG 1226
Drill grinder
Assfalg GmbH
Twist drill sharpening machines
EDG 213 | EDG 1226
42769, 10212
The handy drill grinders are ideal for grinding HSS- and HM-spiral drills. Due to the adjustable point angles from 90° to 140°, this model can be universally used. Easy handling and their efficiency make these machines a real winner in the field of drill grinding.


Field of Application

- Grinding and top thinning of HSS and HM-spiral drills.

The grinding and top thinning of spiral drills of every kind occur without problems with the drill grinder EDG 213N and EDG 1226N.


Options

- Diamond grinding disk


Features

- Good handling thanks to easy and practical design
- Top thinning and regrinding of drills by specially guided collet chucks
- With back taper for perfect with shaping the cross cutter
- Universally adjustable point angle
- Durable grinding disk

The very easy operation of the drill grinders EDG 213 N and EDG 1226N is a great advantage. The drill bit is clamped by a collet in a chuck and is ground and thinned in one work process. The simple operation and the durable grinding wheels make the drill grinding machines EDG 213N and EDG 1226N to an affordable, reliable and economical assistant.


Scope of Delivery

- Allen key 4 mm
- Allen key 5 mm (for EDG 213)
- Allen key 6 mm (for EDG 1226)
- Spring pin ((for EDG 1226)
- CBN grinding disk
- Collet set
- Tool holder
- Operating instructions
  • EDG 213 Application 2
  • EDG 213 Application 3
TV 95-SL
TV 95-SL
Stone Vibration Deburring and Slide Grinding Machine
Assfalg GmbH
Barrel and vibratory finishing machines
TV 95-SL
As large as a washing machine, the stone vibration deburring machine has a storage capacity of 95 l, representing a popular compromise between big industrial.


Application

- Deburring, polishing, brightening, cleaning and drying of laser-, water- or plasma steel cut small
pieces or fi ne cut work pieces
- For this, especially polishing media or additives are required depending on the work piece quality


Options

- Grinding and polishing media for individual application
- Additive (compounds)
- Separator
- Paper filter
- Collecting tub


Features

- Simple emptying via a spout at the side of the machine
- Quiet due to noise protection hood
- With timer
- With integrated water tank for wet processing
- Sturdy, long-life construction with plastic-coated steel trough inside
- Mobile at any time by means of rollers on the underside
- Mixture ratio (grinding tool:work pieces) 7:1 to 3:1
- Speed regulation


Delivery contents

- Timer
- Water tank
- Pump
- Operating instructions
  • Application
  • Paper filter
  • TV 95-SL with paper filter
  • Separator
  • Separator
  • Roundtub vibrator+centrifuge
  • Grinding stones 1
  • Grinding stones 2
DHB 330 | DHB 520
DHB 330
Pneumatic Hand Belt Grinder
Assfalg GmbH
Tape finishing machines
DHB 330 | DHB 520
60438, 61542
The pneumatic hand belt grinder machines are used for the surface-, contour- and shape cut. The 360° swivelling grinding arm makes an individual adjustment for the working situation possible. The grinding belt is clamped over the automatic grinding jig.


Application

- Deburring of edges and bore diameters and work pieces with the most diff erent contours
- Processing of work pieces made of steel, hardened steel, aluminium, non-ferrous metal and plastic piece
- Processing of close matches, small breaches and diffi cult to access places


Features

- Robust construction
- Low weight
- 360° swivelling grinding arm


Options

- Grinding belts in diff erent grain sizes


Delivery contents

- 3 x grinding belt 330 x 10 mm (only by DHB 330)
- 3 x grinding belt 520 x 20 mm (only by DHB 520)
- Allen key 4 mm
  • DHB 330
  • DHB 330/ 520 accessoire
  • DHB 330/ 520 application 1
  • DHB 330/ 520 application 2
  • DHB 330/ 520 application 3
  • DHB 330/ 520 application 4
ASO 600-A
ASO 600-A
Beveling Machine for Contours
Assfalg GmbH
Deburring and edge milling machines; stationary
ASO 600-A
10609
The small and compact machine chamfers or rounds edges precisely, safely and with ease. It leaves chatter-free bevels and radii on square and round work pieces in different materials. Its universality makes the machine unique!


Professional advantages

- Thanks to its belt transmission, the machine can be used in continuous operation
- Tool change within a few seconds
- Offset voltage


Application

- Minimum work piece thickness 1 mm
- Can be used for steel, hardened steel, aluminium, brass, copper,
plastic, from soft plastic to acrylic glass, wood and much more
- Chamfering or rounding of external and internal contours


Options

- Prism attachment for straight edges
- Guide finger for the use of tapered contour cutters
- Extraction device with automatic switch-on
- Special cutters on request


Features

- Compact, handy tabletop unit next to the CNC milling machine and CNC lathe
- Precise chamfer adjustment
- Chamfer angle can be changed due to contour cutter with different point angles
- Fast tool change with offset voltage
- Hardened table with extraction socket


Delivery contents

- Stop ruler
- Open-ended wrench SW 17
- Insert ring with borehole ø 12 mm
- Collet chuckø 6 mm
- Union nut
- Operating instructions
  • Beveling Machine for Contours ASO 600-A
  • ASO 600-A
  • Application 1
  • Application 2
  • Application 3
  • Application 4
  • accessoire 1
  • accessoire 2
  • accessoire 3
  • accessoire 4
  • accessoire 5
  • accessoire 6
  • accessoire 7
  • accessoire 8
  • accessoire 9
  • accessoire 10
  • accessoire 11
  • accessoire 12
KKF 4 | KKF 4-SL
KKF 4 mit Unterwagen
Chamfering Machine for Contours
Assfalg GmbH
Deburring and edge milling machines; stationary
KKF 4 | KKF 4-SL
60063, 63368
The spindle bearings mounted under pre-stress lend high-precision concentricity to the KKF 4. It can be used both full hard metal-form cutters and insert milling cutters, by means of which an excellent useful life is achieved.


Professional advantages

- Big supporting table
- Very good concentricity
- Thanks to its belt transmission, the machine can be used in continuous operation
- Tool change within a few seconds


Application

- Minimum work piece thickness 1 mm
- Can be used for steel, hardened steel, aluminium, brass, copper, plastic, from soft plastic to acrylic glass, wood and much more
- Chamfering or rounding of external and internal contours


Options

- Mobile undercarriage with big rubber rollers
- Prism attachment for straight edges
- Stop ruler
- Guide finger for the use of tapered contour cutters
- Extraction device


Features

- Precise chamfer adjustment by micrometer button
- Chamfer angle can be changed due to contour cutter with different point angles
- Fast tool change
- Wide selection of cutters
- Two speed steps speed regulation
- Hardened machine table with extraction socket


Delivery contents

- Collet chuck quick connector
- Insert ring with borehole ø 30 mm
- Collet chuckø 6 mm, 8 mm, 10 mm, and 12 mm
- Union nut
- Operating instructions
  • KKF 4 with undercarriage
  • KKF 4
  • KKF 4
  • KKF 4
  • Application 1
  • accessoire 1
  • accessoire 2
  • accessoire 3
  • accessoire 4
  • accessoire 5
  • accessoire 6
  • accessoire 7
  • accessoire 8
BKE 550
BKE 550
Sheet Deburring Machine
Assfalg GmbH
Sheet metal deburring machines
BKE 550
45373
The compact plate Deburring Machine is suitable for deburring of straight plate edges.

Application

- Fast deburring on both sides in one operation
- For small sheets in horizontal operation and large sheets in vertical operation
- Universal for all materials from 1 - 5 mm thickness

Options

- Flap wheels for steel and stainless steel with different grain sizes
- Dust extraction


Features

- Sturdy sustainable sheet construction with exhauster
- Grinding wheels readjustable via hand wheel
- Linear stop for sheet metal adjustment
- Easy handling and fast tool change
- Two speed steps


Delivery contents

- Longitudinal stop
- 2 flap wheels
- Extraction socket
- Operating instructions
  • application 1
  • application 2
  • accessoire 1
  • accessoire 2
Mango II | Universal Hand Tool A | GLO-BURR
Mango II | Universal Hand Tool A | GLO-BURR
Hand Deburrer
Assfalg GmbH
Deburring equipment and plants; mechanical
61111, 63, 63258
The high quality hand deburrers are a favourite and wanted compact tool for the daily manual use. You can debur drillings, slots and edges. Varied blades for diff erent works are available. Rotatable blades adapt to the contour of the workpiece.


Application

- Chamfering of workpieces made of steel, stainless steel, aluminium, brass and plastic materials
- Chamfering of stright edges and contours


Features

- Easy and handy form
- Simple handling
- Coated and uncoated blades


Options

- Different hand graps
- Different blade holders
- Different blades


Delivery contents

- Available individually or in a set
  • accessoire 1
  • accessoire 2
  • accessoire 3
  • Universal Hand Tool A
  • MANGO II
AG 360 | AG 460 | GDS 009 | 101-E
AG 360
Pneumatic Grinder
Assfalg GmbH
Deburring and edge milling machines; mobile
AG 360 | AG 460 | GDS 009 | 101-E
42414, 42727, 31676, 45856,
The lightweight and handy air grinders and electric grinders are ideal for both the rough and the fine use. Confined spaces and every 3D-shapes can be processed using various grinding pencils and burrs.


Field of Application

- Deburring of edges and bore diameters and work pieces with the most different contours
- Processing of work pieces made of steel, hardened steel, aluminium,
non-ferrous metal and plastic piece
- Processing of close matches, small breaches and difficult to access places

The lightweight and handy air grinders and electric grinders are ideal for both the rough and the fine use. These grinders provide a high-precision grinding, deburring, milling and roughing.


ASSFALG Professional advantages

- Easy operation
- Very lightweight motor hand pieces
- Large selection of materials
- Tool change within a few seconds


Options

- Collet chuckø 2.35 mm
- Collet chuckø 3 mm
- Collet chuckø 6 mm (only for AG 460)
- Carbide rotary burr
- Corundum grinding pencils


Features

- Lightweight and handy versions
- Easy handling
- High capacity and durability


The quick tool changes and easy handling make the air grinders and electric grinders to true helpers - not only at work, even within the household.


Scope of Delivery

- Compressed air hose and exhaust air hose
- Collet chuck ø 3 mm
- Collet chuck ø 6 mm (only for AG 460)
- Collet chuck quick connector
- Locking wrench
- Operating instructions
  • AG 360
  • AG 460
  • 101-E
  • GDS 009
ASO 300 | ASO 310
ASO 300 | ASO 310
Pneumatic, handheld Chamfering Machine
Assfalg GmbH
Deburring and edge milling machines; mobile
ASO 300 | ASO 310
61881, 20039
The pneumatic, handheld Chamfering Machine is an ideal solution for deburring straight edges and contours. Due to its lightweight and ergonomic structural shape, it exhibits easy handling and operation.


Application

- Chamfering of flat work pieces made of steel, max. 1,000 N/mm², aluminium, brass, copper, plastics, acrylic glass, wood and much more
- Can be used for straight edged and contours
- For 45° chamfers and for rounding edges
- Bores from Ø = 7 mm can be processed


Options

- Stop collar for thin sheets
- Plastic disk for scratch-free surfaces


Features

- Absolutely burr-free cutting
- Clean and consistent processing of component parts and series
- Fast convert or replace of the carbidecutting inserts
- Suitable for continuous operation


Delivery contents

- Hook spannerø 58 65 mm
- Torx key T 9
- Setting gauge
- Cutter head with cutting inserts
- Compressed air hose without nipple
- Operating instructions
  • ASO 300 accessoire
ASO 312 | ASO 313
ASO 312 | ASO 313
Chamfering Machine, handheld, pneumatic | electric
Assfalg GmbH
Deburring and edge milling machines; mobile
ASO 312 | ASO 313
26153, 32938
The compact and robust, handheld Chamfering Machines are particularly suitable for chamfering flat work pieces. Stable, screwed cutting inserts guarantee long useful life.


Application

- Chamfering of flat work pieces made of steel, stainless steel, cast iron, aluminum, brass and plastics
- Chamfering of straight edges
- Preparing of weld edges
- Rounding edges


Options

- Radius inserts R2 - R4 mm


Features

- Absolutely burr-free cutting
- Clean and consistent processing of component parts and series
- Fast retrofit or replace of the carbidecutting inserts
- Wear-resisting, hardened guide rails
- Long useful life of the cutting inserts
- Adjustable according to right- or lefthander
- Angle-adjustable rails


Delivery contents

- Allen key 3 mm
- Torx key T 15
- Handle grip
- Cutter head with cutting inserts
- Operating instructions
  • application 1
  • application 2
  • accessoires 1
  • accessoires 2
ASO 750 | ASO 760-2
ASO 750 | ASO 760-2
Chamfering Machine, Deburring Machine, handheld, electric
Assfalg GmbH
Deburring and edge milling machines; mobile
ASO 750 | ASO 760-2
10304, 10670
The compact and robust handheld Chamfering machine is particularly suitable for preparing weld seams of large work pieces, also with milling angles and shear rates. Simple handling of the machines ensures optimal selection of weld seam preparation at straight edges and round blanks.


Field of Application

- Suitable for sturdy continuous operation with manual feed
- For preparing weld seams
- Ideal for chamfering at steel and non-ferrous metal

This bevel-chamfering machine is suitable for the edge processing. The handheld, electric chamfering and deburring machine ASO 750 | ASO 760-2 chamfers / bevels on straight edges and is ideal for the weldseam preparation.


Options

- Appliance for tubes with external diameter 150 mm and more


Features

- Easy chamfer and angle adjustment
- Can also be used with milling angles and shear rates
- Wear-resisting, hardened guide rails
- Sturdy casting construction with ergonomic handle grip
- Ideal for steel and alu processing

There is an easy and soft processing chamfer start possible up to 20 mm chamfers, particularly by processing of large work pieces. The chamfer and deburring machine ASO 750 | ASO 760-2 is just the right decision for these processes.


Scope of Delivery

- Allen keys 4 and 5 mm
- Cutter head with cutting inserts
- Electric cable without plug
- Operating instructions
  • ASO 750
  • ASO 750
  • ASO 750-760 accessoires 1
  • ASO 750-760 accessoires 2
ASO 760-3
ASO 760-3
Chamfering Machine, Deburring Machine, handheld, electric
Assfalg GmbH
Deburring and edge milling machines; mobile
ASO 760-3
10249
The compact handheld Chamfering Machine is particularly suitable for weld seam preparation of large work pieces. The new, 3-row cutter head with screwed cutting inserts ensures clean and constantly equal chamfers.


Application

- Suitable for sturdy continuous operation with manual feed
- For preparing weld seams
- Ideal for chamfering at steel, stainless steel and non-ferrous metals


Options

- Appliance for tubes with external diameter 150 mm and more


Features

- Easy chamfer and angle adjustment
- Wear-resisting, hardened guide rails with roller wheels
- Sturdy cast-iron construction with ergonomic handle grip


Delivery contents

- Allen keys 4 and 5 mm
- Torx key T 15
- Cutter head with cutting inserts
- Electric cable without plug
- Operating instructions
  • ASO 760-3 accessoires 1
  • ASO 760-3 accessoires 2
F3, S3
F3
Deburring and edge milling machine; mobile
Assfalg GmbH
Deburring and edge milling machines; mobile
F3, S3
The handy and powerful electric grinders are optimally suited for individual applications for deburring, cutting, grinding and polishing. Confined spaces and every 3D-shapes can be processed using various grinding pencils and burrs.


Professional advantages

- Very handy by lightweight, compact and balanced motor handpieces for fatigue-free and efficient operation
- Large selection of tools
- Tool change within a few seconds
- Sight protection glass with LED and with gooseneck magnetic base


Application

- Ideal tool for deburring, cutting, grinding and polishing
- Processing of work pieces made of steel, hardened steel, aluminium, non-ferrous metal and plastic
- Processing of close matches, small breaches and difficult to access places


Options

- Collet chuck ø 3 mm or smaller
- Collet chuck ø 6 mm
- Foot switch
- Angle handpiece 50° & 90° (MT W only)
- Carbide rotary burr
- Corundum, CBN and diamond grinding pencils
- Control Unit MTC40, MTC50 or MTQ/100


Features

- Easy handling
- Smooth running, even at 100,000 rpm
- High rotational speed combined with high torque
- High machine lifetime
- Freely selectable combination of control unit and motor handpiece
- Made in Germany


Delivery contents

- Collet chuck ø 3 mm (F3, MT W & MTQ 100 MH only)
- Collet chuck ø 6 mm (F6 only)
- Collet chuck quick connector (F6 only)
- Locking wrench (F6 only)
- Handpiece holder
- Operating instructions
  • F3
  • S3
MT W 50° / MT W 90°
MT W 50° / MT W 90°
Deburring and edge milling machine; mobile
Assfalg GmbH
Deburring and edge milling machines; mobile
MT W 50° / MT W 90°
The handy and powerful electric grinders are optimally suited for individual applications for deburring, cutting, grinding and polishing. Confined spaces and every 3D-shapes can be processed using various grinding pencils and burrs.


Professional advantages

- Very handy by lightweight, compact and balanced motor handpieces for fatigue-free and efficient operation
- Large selection of tools
- Tool change within a few seconds
- Sight protection glass with LED and with gooseneck magnetic base


Application

- Ideal tool for deburring, cutting, grinding and polishing
- Processing of work pieces made of steel, hardened steel, aluminium, non-ferrous metal and plastic
- Processing of close matches, small breaches and difficult to access places


Options

- Collet chuck ø 3 mm or smaller
- Collet chuck ø 6 mm
- Foot switch
- Angle handpiece 50° & 90° (MT W only)
- Carbide rotary burr
- Corundum, CBN and diamond grinding pencils
- Control Unit MTC40, MTC50 or MTQ/100


Features

- Easy handling
- Smooth running, even at 100,000 rpm
- High rotational speed combined with high torque
- High machine lifetime
- Freely selectable combination of control unit and motor handpiece
- Made in Germany


Delivery contents

- Collet chuck ø 3 mm (F3, MT W & MTQ 100 MH only)
- Collet chuck ø 6 mm (F6 only)
- Locking wrench (F6 only)
- Handpiece holder
- Operating instructions
MTQ 100 MH
MTQ 100 MH
Electric grinder
Assfalg GmbH
Deburring and edge milling machines; mobile
MTQ 100 MH
d: 3mm
0,33 kg
MTQ 100
The handy and powerful electric grinders are optimally suited for individual applications for deburring, cutting, grinding and polishing. Confined spaces and every 3D-shapes can be processed using various grinding pencils and burrs.


Professional advantages

- Very handy by lightweight, compact and balanced motor handpieces for fatigue-free and efficient operation
- Large selection of tools
- Tool change within a few seconds
- Sight protection glass with LED and with gooseneck magnetic base


Application

- Ideal tool for deburring, cutting, grinding and polishing
- Processing of work pieces made of steel, hardened steel, aluminium, non-ferrous metal and plastic
- Processing of close matches, small breaches and difficult to access places


Options

- Collet chuck ø 3 mm or smaller
- Collet chuck ø 6 mm
- Angle handpiece 50° & 90° (MT W only)
- Foot switch
- Carbide rotary burr
- Corundum, CBN and diamond grinding pencils
- Control Unit MTC40, MTC50 or MTQ/100


Features

- Easy handling
- Smooth running, even at 100,000 rpm
- High rotational speed combined with high torque
- High machine lifetime
- Freely selectable combination of control unit and motor handpiece
- Made in Germany


Delivery contents

- Collet chuck ø 3 mm (F3, MT W & MTQ 100 MH only)
- Collet chuck ø 6 mm (F6 only)
- Collet chuck quick connector (F6 only)
- Locking wrench (F6 only)
- Handpiece holder
- Operating instructions


  • MTQ 100 Control Unit
  • MT_application 1
  • MT_application 2
  • MT_application 3
  • MTC Control Unit
  • MTQ Control Unit
ASO 930
 ASO 930
Chamfering Machine, selfpropelling
Assfalg GmbH
Deburring and edge milling machines; stationary
ASO 930
60269
With the ASO 930 milling the front- and bottom side on the workpiece is now possible. The turning of the workpiece is no longer necessary.


Application

- Especially for heavy, long and large-area workpieces
- Front- and bottom side surface milling at an angle of 0°-60° with milling widths up to 53 mm
- Preferred for mobile use on a roller carriage, but also with crane support or stationary


Options

- Speed regulation
- Roughing cutter head RC16
- Cutter head WSX for workpieces < 8mm and smaller bevels
- Special version for workpiece thicknesses: 8 - 100 mm or < 8 mm


Features

- Simple bevel- and angle adjustment
- Automatic feed regulation depending on the material of 0 - 1.2 m/min
- Sturdy cast iron construction
- Hardened worktable with guide rollers
- Working height 820 - 970 mm


Delivery contents

- Allen key of 8 mm and 10 mm
- Electric cable without plug
- Operating instructions
  • AS0 930 application 1
  • AS0 930 application 2
  • AS0 930 accessoire 1
  • AS0 930 accessoire 2
UA 5
 UA 5
Power Engine
Assfalg GmbH
Deburring and edge milling machines; stationary
UA 5
29531
Whether grinding, polishing, brushing or deburring - the universal drive engine Starmax UA 5 is used in all materials. A wide variety of tools makes the machine very flexible and indispensable in your production.


Application

- Mobile drive machine for the universal operation in the fabrication
- Grinding, polishing, brushing and deburring of all common materials with only one machine
- Flexible and mobile operation with flexible shaft


Options

- Extended shaft
- Flexible shaft
- Keyed chuck with mounting
- Grinding belt wheel
- Various grinding, polishing, brushing and deburring tools for individual use


Features

- Infinitely variable speed regulation
- Easy handling and operation
- Smooth running due to massive spindle bearing
- Maintenance-free due to frequency converter
- Usable for commercially available grinding, polishing, brushing and deburring tools


Delivery contents

- 3× spindle mounts
- 3× star grinders each, big and small
- Cap
- Protective cover
- Operating instructions
  • UA 5 Applicatioaccessoire n 1
  • accessoire 1
  • accessoire 3
  • accessoire 2
AF 165
AF 165
Beveling Machine with Sanding Disc
Assfalg GmbH
Deburring and edge milling machines; stationary
AF 165
19281
Its special area includes the removal of saw burrs and roughing burrs so that work pieces can be further processed and are safe to use. Fast, cost efficient edge grinding is achieved by durable flap disks, CBN- or diamond grinding wheels.


Application

- Minimum work piece thickness 3 mm
- Can be used for steel, hardened steel, aluminium, brass, copper, plastic, from soft plastic to acrylic glass, wood and much more


Options

- Table extension
- Dust extraction
- Flap disks for steel or stainless steel with different grain sizes
- CBN- and diamond grinding wheels


Features

- Easy operation
- Uncomplicated tool change
- Freely adjustable chamfer adjustment
- Hardened guide rails
- Clean working place due to exhauster


Delivery contents

- Flap disks with special bond
- Extraction socket
- Operating instructions
  • application 1
  • application 2
  • accessoire 1
  • accessoire 2
  • accessoire 3
ASO 160-M | ASO 160-MSL
ASO 160-M | ASO 160-MSL
Chamfering Machine with V-prism for Straight Edges
Assfalg GmbH
Deburring and edge milling machines; stationary
ASO 160-M | ASO 160-MSL
35035, 35141
The chamfering of thin sheets, solid material or tubular profiles is not a problem for the machine. Whether small parts or bars, a constantly high surface quality is chamfered. This makes it an indispensable assistant in all metalworking individual parts, - and series production.


Professional advantages

- Sharp-edged chamfering is possible, that is, a 3mm x 45 ° bevel can be added on a 3mm thick workpiece.
- Small parts can be processed quickly and easily by hand
- Bars are chamfered by means of the automatic feed
- Constantly high surface quality


Application

- Minimum workpiece thickness of 1mm
- Suitable for steel, max. 1000 N/mm², aluminum, brass, copper, plastics,
from soft plastic to acrylic glass, wood and much more
- Deburring of workpieces up to weld preparation


Options

- Mobile undercarriage with big rubber rollers and integrated swarf drawer
- Automatic feed for series production and the processing of bars
- Roller conveyor with V-prism to extend the guide bars


Features

- Chamfer adjustment by micrometer screw
- Speed regulation (ASO 160-SSL)
- Fast tool change
- V-prism for ideal guidance of the workpieces
- Hardened and polished guide bars
- Soft cutting pressure


Delivery contents

- Allen key of 5mm and 6mm
- Torx key T20
- Aluminum block for processing front sides
- Plan cutter head equipped with inserts
- Swarf ejection tube (only with the ASO 160-MSL)
- Operating instructions
  • Chamfering Machine ASO 160 with V-prism for straight edges
  • ASO 160-MSL
  • ASO 160 Application 1
  • ASO 160 Application 2
  • ASO 160 Application 3
  • ASO 160 Application 4
  • ASO 160 accessoire 1
  • ASO 160 accessoire 2
ASO 160-S | ASO 160-SSL
ASO 160-S | ASO 160-SSL
Chamfering Machine with V-prism for straight edges
Assfalg GmbH
Deburring and edge milling machines; stationary
ASO 160-S | ASO 160-SSL
22277, 28569
Whether individual parts or series production, the ASO 160 - S / SSL is an indispensable assistant in all metalworking operations. You can easily process both small parts and bars. The optically polished looking chamfer surfaces represent the skill of the machine.


Professional advantages

- Small parts can be processed quickly and easily by hand
- Bars are chamfered by means of the automatic feed
- Constantly high surface quality


Applications

- Minimum workpiece thickness of 3 mm
- Suitable for steel, max. 1000 N/mm², aluminum, brass, copper, plastics, from soft plastic to acrylic glass, wood and much more
- Deburring of workpieces up to weld preparation


Options

- Mobile undercarriage with big rubber rollers and integrated swarf drawer
- Automatic feed for series production and the processing of bars
- V-roller conveyor to extend the guide bars


Features

- Chamfer adjustment by micrometer screw
- Speed regulation (ASO 160-SSL)
- Fast tool change
- V-prism for ideal guidance of the workpieces
- Hardened and polished guide bars
- Soft cutting pressure


Delivery contents

- Allen key of 5mm and 6mm
- Torx key T20
- Aluminum block for processing front sides
- Milling head equipped with inserts
- Swarf ejection tube (only with the ASO 160-SSL)
- Operating instruction
  • ASO 160 Application 1
  • ASO 160 Application 2
  • ASO 160 Application 3
  • ASO 160 Application 4
  • ASO 160-S feeding module
  • accessoire 1
ASO 650 | ASO 650-WSL
ASO 650 | ASO 650-WSL
Chamfering Machine with V-prism for Straight Edges
Assfalg GmbH
Deburring and edge milling machines; stationary
ASO 650 | ASO 650-WSL
10229, 10230
Deburring and chamfering of big work pieces is an easy job. Rounding of edges in use with radius inserts is also possible. Speed control is very useful when processing aluminum or stainless steel.


Professional advantages

- Axial cutter head adjustment for utilization of inserts by small chamfers
- Chamfer adjustment by micrometer button
- For continuous operation


Application

- Clean and burr-free chamfering
- Suitable for sturdy continuous operation
- For preparing weld seams
- With short or thin work pieces below 5 mm, the guide rails can be turned and used with a 2 mm cutting gap


Options

- Automatic feed
- Radius cutting inserts R1 - 10 mm


Features

- Sturdy cast iron construction with swarf drawer
- Wear-resistant, hardened and ground guide rails
- Precise chamfer adjustment by micrometer button
- Wide variety of different cutting inserts for various materials
- Long useful life due to sturdy square cutting inserts and circumferential cutting


Delivery contents

- Allen key 4 mm
- Side milling cutter SP 12 (only with ASO 650)
- Side milling cutter SP 15 (only with ASO 650-WSL)
- Electric cable without plug
- Operating instructions
  • ASO 650-WSL
  • ASO 650 Application 1
  • ASO 650 Application 2
  • ASO 650 Application 3
  • ASO 650 accessoire 1
  • ASO 650 accessoire 2
ASO 850
ASO 850
Beveling Machine
Assfalg GmbH
Deburring and edge milling machines; stationary
ASO 850
24027
The sturdy and easy chamfering machine is designed for deburring and edge cutting of big workpieces from 2 mm thickness. Thanks to the optimised interplay of cutter head and cutting inserts, the machine ensures clatter-free, clean and constant chamfering up to 3 mm× 45° in a section.


Application

- For visually beautiful 45° chamfers
- Universal for robust continuous operation


Options

- Mobile undercarriage
- Automatic feed
- Corundum or CBN grinding disk for hardened work pieces
- Variable speed control 0 10,000 rpm


Features

- Chamfer adjustment via micrometer button
- Effortless chamfering due to low cutting pressure
- Sturdy cast iron construction with swarf drawer
- Wear-resistant, hardened and ground guide rails
- Wide variety of different cutting inserts for various materials


Delivery contents

- Allen key 4 and 8 mm
- Operating instructions
  • application 1
  • application 2
  • application 2
  • accessoire 1
  • accessoire 2
  • accessoire 3
ASO 900 | ASO 900 Plus | ASO 900 Plus-Bigger
ASO 900 | ASO 900 Plus | ASO 900 Plus-Bigger
Chamfering Machine, selfpropelling
Assfalg GmbH
Deburring and edge milling machines; stationary
42699, 63133, 64909
Chamfering long and widespread work pieces at angles from 15° - 60° is carried out by the chamfering machine easily. This machine is very strainable and has shown its strength for each material.


Application

- Especially suitable for heavy, long and large-size work pieces.
- Universal for all materials, suitable for continuous operation
- Mobile operation of roller carriage or with crane support or stationary


Options

- Speed regulation
- Roughing blade head RC 16
- Blade head WSX for work pieces < 8mm and smaller chamfers
- Special version for work piece thicknesses: 8 - 100 mm or 8 - 200 mm or < 8mm
- Special version with angle adjustment 10 - 73° or 0° fix regarding the perpendicular


Features

- Very long operating life and cutting performance, also with stainless steel
- Can be easily set to material thickness, chamfer angle and working height
- Automatic feed adjustment depending on the relevant material from 0 - 1 m/min.
- Sturdy cast iron/steel construction, hardened work table with guide rollers
- Working height 800 - 980 mm


Delivery contents

- Allen key 8 and 10 mm
- Electric cable without plug
- Operating instructions

  • Chamfering Machine ASO 900
  • ASO 900 application 1
  • ASO 900 application 2
  • ASO 900 accessoires 1
  • ASO 900 accessoires 2
ASO 910
ASO 910
Chamfering Machine, selfpropelling
Assfalg GmbH
Deburring and edge milling machines; stationary
ASO 910
54235
Recess chamfering or the removal of cladding is mastered excellently by the automatic Chamfering Machine ASO 910. Thanks to its robust version, the machine achieves a chamfer width of up to 50 mm and a chamfer depth of up to 15 mm. The machine is unique in this performance category.


Application

- Especially suitable for heavy, long and extensive work pieces
- This machine is universal for all materials and suitable for continuous operation
- Recess chamfering or slight bevelling at angles of 90° - 75° regarding the perpendicular
- Mobile operation of roller carriage or with crane support or stationary


Options

- Speed regulation
- Face-milling, square shoulder or radius chamfer can be used, depending on the relevant recess outlet
- Special version for larger plate thicknesses
- Special version for work piece thicknesses: 8 -100 mm
- Extension of the axis adjustment up to 100 mm


Features

- Feed in X- and Z-axis, as well as slight chamfer angle adjustment
- Automatic feed adjustment depending on the relevant material from 0 1 m/ min.
- Sturdy cast iron/steel construction, hardened work table with guide rollers
- Working height 930 - 1,120 mm


Delivery contents

- Allen key 8 and 10 mm
- Electric cable without plug
- Operating instructions
  • accessoire 1
  • accessoire 2
Loading ...