KKF 4-SL

The small, compact deburring machine mills or rounds edges precisely, safely and with ease. It leaves chatter-free chamfers and radii on angular and round workpieces made of a wide variety of materials. Its universality makes it unique.


Professional advantages

- For continuous use with brushless motor
- Tool change within a few seconds
- Zero point clamping
- Extraction socket
- Compact, handy tabletop unit next to the CNC milling- and turning machine
- Precise chamfer adjustment
- Chamfer angle can be changed due to contour cutter with different point angles
- Fast tool change with zero point clamping
- Hardened table with extraction socket



Application

- Minimum workpiece thickness 1 mm
- Can be used for steel, hardened steel, aluminium, brass, copper, plastic, from soft plastic to acrylic glass, wood and much more
- Chamfering or rounding of external and internal contours
- For continuous operation



Options

- Prism attachment for straight edges
- Guide finger for the use of tapered contour cutters
- Extraction device with automatic switch-on
- Special cutters on request


Delivery contents

- Stop ruler
- Open-ended wrench SW 17
- Insert ring with borehole ø 12mm
- Collet ø 6mm
- Union nut
- Operating manual


Further accessories can be found in our Accessory Catalogue.

Its specialty includes the removal of saw burrs and heavy roughing burrs so that workpieces can be further processed and are safe to use. Fast, cost-effective edge grinding is achieved with long-life flap wheels, CBN or diamond grinding wheels.


Application

- Minimum work piece thickness 3 mm
- Can be used for steel, hardened steel, aluminium, brass, copper, plastic, from soft plastic
to acrylic glass, wood and much more
- For hardened steel >> CBN-wheels
- For carbide metal >> diamond wheels


Options

- Table extension
- Dust extraction
- Flap disks for steel or stainless steel with different grain sizes
- CBN- and diamond grinding wheels


Features

- Easy operation
- Uncomplicated tool change
- Freely adjustable chamfer adjustment
- Hardened guide rails
- Clean working place due to exhauster


Delivery contents

- Flap disks with special bond
- Extraction socket
- Operating manual

Further accessories can be found in our Accessory Catalogue.

Chamfering thin sheets, solid material or pipe profiles is no challenge for the machines. Whether small parts or bar material, a consistently good surface quality is milled. This makes them indispensable in all metalworking single-part and series production.


Professional advantages


- Small workpieces can be easily and rapidly worked on by hand
- Longer workpieces are chamfered by automatic feed
- Consistent high surface quality
- Chamfer adjustment by micrometer screw
- Speed regulation for the ASO 160-MSL
- Easy tool change
- V-prsim for ideal guidance of the workpieces
- Hardened and ground guide rails
- Soft cutting pressure


Application

- Minimum workpiece thickness of 1 mm
- Suitable for steel, max. 1.000 N/mm², aluminum, brass, copper, plastics, from soft plastic to acrylic glass, wood and much more
- Deburring workpieces up to welding preparation
- For chamfering without rest ridge (cutter edge)


Options

- Mobile undercarriage with big rubber rollers and integrated swarf drawer
- Automatic feed for series production and machining of flat material
- V-roller guideways for extending the guide rails


Delivery contents

- Allen key of 5mm and 6mm
- Torx Key T 20
- Aluminum block for machining of faces
- Plane cutter head with cutting inserts
- Swarf ejection pipe (only with the ASO 160-MSL)
- Operating manual

Further accessories can be found in our Accessory Catalogue.

Deburring and chamfering of big workpieces is an easy job. Rounding of edges in use with radius inserts is also possible. Speed control is very useful when processing aluminum or stainless steel.


Professional advantages

- Sturdy cast iron construction with swarf drawer
- Wear-resistant, hardened and ground guide rails
- Precise chamfer adjustment by micrometer screw
- Various cutting inserts to different materials
- Long tool life due to sturdy square cutting inserts and circumferential cut


Application

- Minimum workpiece thickness 2mm
- Clean- and burr-free chamfering
- Suitable for sturdy continuous operation
- For preparing welding seams
- For short or thin workpieces below 5 mm, the guide rails must be rotated and used with a 2 mm cutting gap


Options

- Automatic feed
- Radius cutting inserts R1,2 ? 6mm


Delivery contents

- Allen key 4 mm
- Side- and face milling cutter KX/DL equipped with cutting inserts
- Operating manual


Further accessories can be found in our Accessory Catalogue.

The stable and simple edge milling machine is designed for deburring and edge milling of small to large workpieces from 2mm thickness. Thanks to the optimized interaction of cutter head and inserts, the machine provides chatter-free, clean and constant chamfering performance up to 3mm x 45° in one cut.


Application

- For visually beautiful 45° chamfers
- Universal for robust continuous operation
- Longer tool life due to automatic workpiece feed
- Higher work safety due to automatic workpiece feed


Options

- Mobile undercarriage
- Automatic feed
- Corundum or CBN grinding disk for hardened workpieces
- Infinitely variable speed regulation 0 ? 10000 rpm


Features

- Chamfer adjustment via micrometer button
- Effortless chamfering due to low cutting pressure
- Sturdy cast iron construction with swarf drawer
- Wear-resistant, hardened and ground guide rails
- Wide variety of different cutting inserts for various materials


Delivery contents

- Allen key 4 and 8 mm
- Operating manual

Further accessories can be found in our Accessory Catalogue.

The automatic chamfering machines cut large welding bevels at an angle between 15° ? 80° without any problem. These machines are very resilient and show their strength in any material. Extremely long tool life is achieved through low-speed milling (rpm).


Application

- Especially suitable for heavy, long and large-size workpieces
- Universal for all materials, suitable for continuous operation
- Mobile operation of roller carriage or with crane support or stationary


Options

- Speed regulation
- Roughing cutter head RC16
- Cutter head WSX for workpieces < 8mm and smaller chamfers
- Special version for workpiece thicknesses: 8 ? 100 mm or 8 ? 200 mm or < 8mm


Features

- Very long tool life and cutting performance, also with stainless steel
- Can be easily set to material thickness, chamfer angle and working height
- Automatic feed adjustment depending on the relevant material from 0-1m/min.
- Sturdy cast iron/steel construction, hardened work table with guide rollers
- Working height 800-980 mm



Delivery contents

- Allen key 8 and 10 mm
- Electric cable without plug
- Automatic workpiece thickness adjustment with the ASO 900 Plus-Bigger
- Operating manual


Further accessories can be foundin our Accessory Catalogue

The ASO 910 automatic edge milling machine masters the milling of heels or the resetting of claddings with flying colours. Thanks to its robust version, the machine achieves a chamfer width of up to 50 mm and a chamfer depth of up to 15 mm. The machine is unique in this performance category.


APPLICATION POSSIBILITIES

- Especially suitable for heavy, long and extensive work pieces
- This machine is universal for all materials and suitable for continuous operation
- Shoulder milling or light bevelling at an angle of 90°-75° regarding the perpendicular
- Mobile operation of roller carriage or with crane support or stationary


OPTIONS

- Face-, corner- or radius milling cutter can be used, depending on shoulder run-out
- Special version for larger plate thickness
- Special version for workpiece thicknesses: 8-220 mm
- Extension of the x-axis feed to 100 mm


ADVANTAGES

- Feed in X- and Z-axis, as well as easy chamfer angle adjustment
- Automatic feed adjustment depending on the relevant material from 0-1m/min.
- Sturdy cast iron-steel construction, hardened work table with guide rollers
- Working height 930 - 1120mm


DELIVERY CONTENTS

- Allen key 8 and 10 mm
- Electric cable without plug
- Automatic workpiece thickness adjustment
- Operating manual


Further accessories can be found in our Accessory Catalogue

Heaviest welding bevels - also in tulip form - can be effectively milled with the ASO 920. This automatic edge milling machine convinces in its performance league.


APPLICATION POSSIBILITIES

- Especially suitable for heavy, long and extensive workpieces
- This machine is universal for all materials and suitable for continuous operation
- Milling of tulip shapes at angles of 0° - 30° related to the perpendicular
- Preferably mobile use on roller carriage, but also with crane support or stationary


ADVANTAGES

- Easy chamfer- and angle adjustment
- Automatic feed regulation depending on the material of 0 - 1.2m/min
- Feed along the Z-axis up to 100 mm possible
- Feed along the X-axis up to 90 mm possible
- Sturdy cast-iron construction, hardened work table with guide rollers
- Working height 920 - 1110mm


DELIVERY CONTENTS

- Allen key of 8mm and 10mm
- Electric cable without plug
- Automatic workpiece thickness setting
- Operating manual


Further accessories can be found in our Accessory Catalogue

With ASO 930 | ASO 930 Plus it is now possible to mill the front and bottom side of the workpiece. The workpiece no longer has to be turned. Extremely long tool life is achieved through low-speed (rpm) milling.


Application

- Particularly for heavy, long and large workpieces
- Face- and bottom milling at an angle of 0°-76° with milling width up to 74mm
- Mobile operation of roller carriage or with crane support or stationary


Options

- Speed regulation
- Roughing cutter head RC16
- Cutter head WSX for workpieces < 8mm and smaller chamfers
- Special version for workpiece thicknesses: 8 ? 100 mm or < 8 mm


Features

- Easy chamfer and angle adjustment
- Automatic feed regulation depending on the material of 0 - 1,2 m / min
- Sturdy cast iron/steel construction
- Hardened worktable with guide rollers
- Working height 820 - 970mm


Delivery contents

- Allen key of 8 mm and 10 mm
- Electric cable without plug
- Automatic workpiece thickness adjustment with the ASO 930 Plus
- Operating manual


Further accessories can be found in our Accessory Catalogue

The grinding machines are suitable for precise deburring and chamfering of straight edges on hard materials. deliverable with wet-grinding unit or dust extractor.

ADVANTAGES
? - Sturdy construction with grinding disk adjusting button
? - Water cooling provides workpiece and grinding disk
? - V-prism with micrometer chamfer adjustment
? - Axial grinding wheel adjustment
? - Sturdy conical 2-zone grinding disk for strong material removal

Options
? - Mobile undercarriage
? - Dust extraction (only for KSM 125)

Delivery contents
? - Standard accessories
? - Grinding disk
? - Extraction socket (only for KSM 125)
? - Water tub and pump (only for KSM 130)
? - Operating manual

The FS 5 is a sturdy and extremely cost-effective chamfering machine with cutter head. Straight edges of cube-shaped workpieces can be easily chamfered. The V-prism is foldable for insert change.


Application

- Minimum workpiece thickness 3 mm
- Clean and burr-free chamfering in a section
- Suitable for almost all materials
- Duty cycle approx. 30% / h


Features

- Easy handling
- Sturdy guide rails
- Fast change of cutter head and cutting inserts


Delivery contents

- Cutter head with cutting inserts
- Swarf drawer
- Operating manual


Further accessories can be found in our Accessory Catalogue.

The automatic welding edge milling machine is ideal for gross shearing of edges by means of a cutting wheel and is thus perfect for stationary and mobile use in welding seam preparation. It enables fast, low-noise and dust-free working.


Application

- Clean and fast chamfering at metal sheets and plates
- Welding seam preparation V-, X-, K- or Y-seam
- Universally applicable for almost all materials up to approx. 700N/mm²
- Extremely low-noise chamfering with highest feed-rates at approx. 2m/min


Options

- Chamfer cutter for steel / stainless steel
- Mobile undercarriage with height adjustment


Features

- Automatic feed
- Easy angle adjustment
- Easy operation and setting
- Sturdy construction


Delivery contents

- Standard accessories
- Universal milling cutter
- Electric cable without plug
- Operating manual


Further accessories can be found in our Accessory Catalogue.

Straight edges, bores, slotted holes and slots are chamfered precisely, quickly and easily. The prism attachment for machining straight edges rounds off the complete package. They are a great helper at a small price.


Professional advantages

- Ideal for chamfers up to 2mm x 45°
- Internal- and external contours can be chamfered and rounded
- Dimensional accuracy due to ball bearing guide or guide ruler
- No chatter marks
- Very good tool life of the solid carbide cutters
- Compact handy tabletop unit next to the CNC milling- and turning machine
- Precise chamfer adjustment
- Speed control for processing different materials
- Chamfer angle can be changed due to contour cutter with different point angles
- Fast tool change


Application

- Minimum workpiece thickness 1 mm
- Can be used for steel, hardened steel, aluminium, brass, copper, plastics, from soft plastic to acrylic glass, wood and much more
- Chamfering or rounding of external and internal contours
- Not for permanent use due to crabon-brush motor with duty cycla 50 % / h
- Suction only with prism application


Options

- Prism attachment for straight edges
- Guide finger for the use of tapered contour cutters
- Extraction device with automatic switch-on (only for KKE 2)


Delivery contents

- Stop ruler, box wrench 17 mm, union nut, allen key 3 mm, collet ø 6 mm,
- Open-ended wrench 14 mm
- Insert ring with borehole ø 8 mm
-Prism with suction socket, insert ring with borehole ø 12 mm, collet ø 8 mm, allen key 5 mm (only for KKE 2)
- Operating manual

This machine is our most powerful edge and contour milling machine and has the largest worktable. Its robust insert milling cutters are ideal for machining larger and heavier workpieces.


Professional advantages

- Big working table
- Sturdy insert milling cutter
- For continuous operation
- Milling cutter infeed through parallel table adjustment
- Extraction socket
- Precise chamfer adjustment by micrometer screw
- Chamfer angle can be changed by using various insert milling cutters
- Speed regulation


Application

- Minimum workpiece thickness 2mm
- Can be used for steel, max. 1.000 N/mm2, aluminum, brass, copper, plastics, from soft plastic to acrylic glass, wood and much more
- Chamfering or rounding of external and internal contours


Options

- Mobile undercarriage with big rubber rollers
- Extraction device
- Stop ruler
- Milling cutters with cutting inserts and guide ball bearing from Ø10mm
- Reducing collar for 12mm solid carbide cutters
- Radius inserts R1,2 ? R6 mm
- Automatic feed


Delivery contents

- Allen key 4 mm
- Torx key
- Stop ring for the use of insert rings
- Operating manual


Further accessories can be found in our Accessory Catalogue.

The automatic welding edge milling machine is ideal for gross shearing of edges by means of a cutting wheel and is thus perfect for stationary and mobile use in welding seam preparation. It enables fast, low-noise and dust-free working.


Application

- Clean and fast chamfering at metal sheets and plates
- Welding seam preparation V-, X-, K- or Y-seam
- Universally applicable for almost all materials up to approx. 700N/mm²
- Extremely low-noise chamfering with highest feed-rates at approx. 2m/min


Options

- Chamfer cutter for steel / stainless steel
- Mobile undercarriage with height adjustment


Features

- Automatic feed
- Easy angle adjustment
- Easy operation and setting
- Sturdy construction


Delivery contents

- Standard accessories
- Universal milling cutter
- Electric cable without plug
- Operating manual


Further accessories can be found in our Accessory Catalogue.

The stationary edge- and contour milling machines are perfect for machining angular and round workpieces with plane inner- and outer contours. They are compact and handy tabletop machines finding their ideal use alongside CNC machines.


Professional advantages

- Ideal for chamfers up to 1mm x 45°
- Suitable for processing small to medium-sized workpieces
- Low setup times with maximum flexibility
- Excellent chamfers by best spindle accuracy
- Zero point clamping
- Easy operation
- Fast tool change
- Speed control (only with Speedy Kontur 270-KSL and Speedy Kontur 320-KSL)
- Chamfer angle can be changed due to contour cutter with different point angles


Application

- For precise deburring and chamfering of inner- and outer edges of flat workpieces
- Can be used for steel, hardened steel, aluminum, brass, copper, plastics, from soft plastic to acrylic glass, wood and much more
- Suitable for continuous operation


Options

- Guide finger, radius- and chamfer cutter with guide ball bearing
- Attachment prism for processing straight edges
- Slug remover-set for face milling of cut-off rotary slugs up to max. Ø1,5mm
- Extraction socket
- Extraction device with automatic switch-on
- Special version for stainless steel processing


Delivery contents

- Allen key 2.5 mm
- Stop ruler
- Solid carbide milling cutter Ø6, pointed
- Cold-device cable
- Insert ring with borehole Ø8mm
- Operating manual

These deburring machines are simple and sturdy table machines equipped with a prismatic slide for efficient and precise machining of longitudinal edges down to smallest workpieces.

ADVANTAGES
? - Surface protecting precision chamfers up to 2 mm (no scratches on the workpiece)
? - Easy operation
? - Fast tool change
? - Speed control for processing different materials
? - Bearing supported sliding carriage for chatter-free milling

Application

- Burr-free chamfering of small precision parts from 1 mm thickness in almost polished precision
- Universal for all materials and suitable for continuous operation
- VHM-milling cutters for all non-hardened workpieces
- CBN-grinding pencil for hardened steel
- Diamond grinding pencil for carbide metal and glass

The sliding carriage of the chamfering machine Speedy Prisma ensures that the workpieces keep scratch-free.

Options

- Extraction socket
- Extraction device


Features

- Surface protecting precision chamfers up to 2 mm (no scratches on the workpiece)
- Easy operation
- Fast tool change
- Speed control for processing different materials
- Bearing supported sliding carriage for chatter-free milling

Options
? - Extraction socket
? - Extraction device
Delivery contents
? - Allen key 2,5mm
? - Prism cutter
? - Operating manual

Whether grinding, polishing, brushing or deburring - the universal drive engine UA 5 is used in all materials. A wide variety of tools makes the machine very flexible and indispensable in your production.


Application

- Mobile drive machine for the universal operation in the fabrication
- Grinding, polishing, brushing and deburring of all common materials with only one machine
- Flexible and mobile operation with flexible shaft


Options

- Extended shaft
- Flexible shaft
- Keyed chuck with mounting
- Grinding belt wheel
- Various grinding, polishing, brushing and deburring tools for individual use


Features

- Infinitely variable speed regulation
- Easy handling and operation
- Smooth running due to massive spindle bearing
- Maintenance-free due to frequency converter
- Usable for commercially available grinding, polishing, brushing and deburring tools


Delivery contents

- 3× spindle mounts
- 3× star grinders each, big and small
- Cap
- Protective cover
- Operating instructions

Further accessories can be found in our Accessory Catalogue.

The perfect machine for chamfering small to mid-size workpieces and bar material. Thanks to its angle adjustment from 15° ? 60°, it is mainly used for welding seam preparation


Professional advantages

- Simple and fast angle adjustment
- Consistent high surface quality
- Automatic feed facilitates chamfering
- Sharp-edged chamfering is possible, e.g. a 5mm x 45°chamfer can be applied to a 5 mm thick workpiece
- Angleadjustment from 15° - 60° (in 5° steps)
- Chamfer adjustment by micrometer button
- Speed control for processing different materials
- Easy tool change
- Hardened and polished guide rails
- Soft cutting pressure


Application

- Minimum workpiece thickness 1 mm
- Can be used for steel, max. 1,000 N/mm², aluminum, brass, copper, plastic, from soft plastic to acrylic glass, wood and much more
- Deburring workpieces up to welding seam preparation


Options

- Mobile undercarriage with big rubber rollers and integrated swarf drawer
- Lateral stop for processing the front side
- Longitudinal stop for secure guidance of small series production parts
- Automatic feed for single-part and series production and processing bar materials
- Roller conveyors for extending the guide rails


Delivery contents

- Torx key T 25
- Plane cutter head with cutting inserts
- Operating manual

Further accessories can be found in our Accessory Catalogue.