The unmistakable advantages of the lifting magnets Elift from Assfalg are economy and fast handling. The hand-operated Permanent Lifting Magnet is the perfect and fully developed solution for moving all ferromagnetic materials in an efficient, safe and reliable way.


Application

- For flat and round material, because of v-prism pole shoe
- Selected lifter size according to load and for easy operation of the switching level
- For raw material, semi-finished and finished products
- In mechanical engineering, tool manufacturing, plant engineering, steel construction, shipbuilding, transport company or materials store


Professional advantages

- Absolutely safe lifting - with 3-times safety factor(the pull-off strength is 3 times more as the recommended lifting force)
- No restrictions on scaled, rough or oily surfaces
- No damaging of the workpiece surface
- Smooth switching ON/OFF via hand lever
- Optimization of crane capacity and space because of independent permanent magnet lifter
- Smooth lever more when switching OFF provided correct lifter size was selected


Features

- Two-hand operation via hand lever and safety lock
- Max. operation temperature 80°C
- Use of durable and extremely strong neodymium magnet materials
- Compact, sturdy construction, low dead weight

The manually switchable lifting magnet is a very good solution for moving all ferromagnetic materials (ferrous materials) in an efficient, fast, safe and economic way.

Application:

- For flat and round material, as the magnetic adhesive surface is provided with a prism pole shoe.
- For thin and thick sheets depending on the magnet size
- For raw material, semi-finished and finished products
- In mechanical engineering, tool manufacturing, plant engineering, steel construction, shipbuilding, transport company or materials store

Features:

- Smooth two-hand operation via hand lever and safety locking
- Max. operation temperature 80°C
- Absolutely safe lifting, as the recommended lifting force is secured 3 times (the pull-off strength is 3 times the recommended lifting force)
- Use of durable and extremely strong Neodym magnet materials
- Compact, sturdy construction, low dead weight

Options:

- Services: Test according to German
- Accident Prevention Regulations and repair

The Electropermanent Battery Lifting Magnets can be used without connection to the power supply. They combine safety of permanent magnets with the operation comfort of electromagnets. Sheets from 6mm thickness can also be separately lifted from stack. Even magnetizing and demagnetizing of the lifting magnet can take place automatically.


Application

- For flat and round material because v-prism pole shoe
- Operation is independent from mains supply
- Usable even for beam operation with 2 magnets
- For raw material, semi-finished and finished products
- In mechanical engineering, tool manufacturing, plant engineering, steel construction, shipbuilding,
steel mill, cutting-, laser operation, transport company or materials store


Professional advantages

- Automatic magnetizing and demagnetizing of the workpiece by AUTO mode
- 3 times safety factor and additional safety feature to drop accidentially the load in the air
- Scaled or rough surface can be mastered
- No current flow during lifting - the magnet is magnetized or demagnetized by pulse current only
- Usable in multi-shift operations, because approx. 300 switches are possible


Features

- Selection between manual or automatic mode
- Max. operation temperature 80°C
- Optical and acoustic alarm device with battery charge level indicator
- Inching for destacking is possible either by power reduction button or by optional wireless remote control
- 300 operation cycles before recharging 8h by mains supply of 110V / 230V

Electropermanent Lifting Magnet
This EPM M magnets are used for frequent handling of workpieces when mains supply is available.
The switching time is rather short. They combine the safety of permanent magnets with the convenience of electromagnets. Only short pulse current is needed for switching, hence energy consumption is very low.


Professional advantages

- Very short switching cycles
- No drop of workpiece when power supply fails
- Mainly maintenance free
- Reduction of power for destacking from 6mm sheet thickness


Features

- Integrated controller for 400V / 50-60Hz / 16A mains supply
- Max. operation temperature 80°C
- Selection of manual mode or automaticmode
Option:
- radio remote control for destacking
- customized applications

The permanent magnet handlifters SH (from German production) and HL are suitable for transporting especially thin sheets as well as oily or sharp-edged ones.


Application

- Handling of thin sheets or small flamecut parts
- Max. operation temperature 80°
- For HL / SH the workpiece surface should be clean and dustfree (oil does not effect the magnetic force)


Features

- Mechanical release by pushing the handle
- Horizontal or vertical sheet transport
- Destacking of even 2mm sheet thickness
- Very flat magnetic field, especially designed for thin sheets

The permanent magnet handlifter HL 60-CE is especially designed for hot or sharp edged flamecut parts. It gets magnetized and demagnetized over push buttons on the handle. The HL 60-CE accu lasts for 1000 switching cycles before recharging. The charger and an exchange accu are included. The HL 60-CE-L is with long handle.


Field of Application

- Usable in mechanical engineering, tool manufacturing, plant engineering, steel construction, shipbuilding, steel mill, transport company or materials store
- Handling of thin sheets or small flamecut parts
- Max. operation temperature 80°C
- The workpieces should be clean and dustfree (oil doesn´t effect the magnetic force)


Features

- Magnetizing or demagnetizing by push buttons
- Nearby no residual magnetism, therefore unsensitive to dust or chips
- The electrical switching protects the workpiece surface


Scope of Delivery

- Two batteries for charging
- Battery charger

The EPMagnet Modules are switched by mains power supply. They combine the safetyness of permanent magnets with convenience of electromagnets. Sheets from 5mm thickness can be destacked. Magnetizing and demagnetizing of the EPM lifting system can happen manually or by radio remote control. For uneven sheet formats the EPMagnet Modules are equipped with spring suspensions. The EPMagnet modules are integrated in a magnet unit, which is fixed to the beam.


Application

- Especially for sheet lifting
- Destacking by remote control
- For loading or deloading flamecut systems on trucks
- More flexibility with telescopic beams
- For feeding and clearing of flame-cutting-/laser systems, also in multi-shift operation
- Optional: EPMagnet modules for horizontal and vertical transport


Features

- EPM lifting systems is ready for use up to the crane hook
- Power supply is 400V / 50-60Hz / 16A or 32A
- Lamp and buzzer indicates the magnetization and demagnetization process
- Picking up is done with 70% power and automatically increased to 100% after 10 seconds
- Accidential demagnetization during lifting is prevented by ADPREM safety mechanism
- Different magnetic zones can be selected according to sheet size
- Low energy load consumption because of pulse current for switching
- No drop of load when power supply fails



Options

- Customized beam and EPMagnet modules
- Triggering of each EPMagnet module
- Special safety features for automation
- Integration of load cells and magnet flow sensors

These devices enable securely picking-up curved work pieces, and placing them in presses as well as punching tools and unloading them, then.The hands remain outside the hazard zone - accidents are
avoided.


Features

Generals
- Maximum safety due to permanent magnets
- Heat-resistant up to 80°C
- Easy loosening by mechanical ejector or leverage ELM
- ELM 100-H > Picking-up of checker plates is possible


Applications

- For secure lifting and transporting of sheet-metal, flame-cut parts as well as sharp-edged and
greasy work pieces

These devices enable securely picking-up curved work pieces, and placing them in presses as well as punching tools and unloading them, then.The hands remain outside the hazard zone - accidents are
avoided.


Features

Generals
- Maximum safety due to permanent magnets
- Heat-resistant up to 80°C
- Easy loosening by mechanical ejector or leverage ELM


Applications

- For secure lifting and transporting of sheet-metal, flame-cut parts as well as sharp-edged and
greasy work pieces

These devices enable securely picking-up curved work pieces, and placing them in presses as well as punching tools and unloading them, then.The hands remain outside the hazard zone - accidents are
avoided.


Features

Generals
- Maximum safety due to permanent magnets
- Heat-resistant up to 80°C
- Easy loosening by mechanical ejector or leverage ELM


Applications

- For secure lifting and transporting of sheet-metal, flame-cut parts as well as sharp-edged and
greasy work pieces

These devices enable securely picking-up curved work pieces, and placing them in presses as well as punching tools and unloading them, then.The hands remain outside the hazard zone - accidents are
avoided.


Features

Generals
- Maximum safety due to permanent magnets
- Heat-resistant up to 80°C
- Easy loosening by mechanical ejector or leverage ELM


Applications

- For secure lifting and transporting of sheet-metal, flame-cut parts as well as sharp-edged and
greasy work pieces

These devices enable securely picking-up curved work pieces, and placing them in presses as well as punching tools and unloading them, then.The hands remain outside the hazard zone - accidents are
avoided.


Features

Generals
- Maximum safety due to permanent magnets
- Heat-resistant up to 80°C
- Easy loosening by mechanical ejector or leverage ELM


Applications

- For secure lifting and transporting of sheet-metal, flame-cut parts as well as sharp-edged and
greasy work pieces

The electropermanent battery lifting magnets are suitable for the flat material load range of 200kg / 500kg / 950kg and the round material load range of 50kg / 200kg / 400kg. Using a current pulse of less than one second the electropermanent battery lifters SB 200 / SB 500 / SB 950 from Assfalg are switched manually by pushbuttons or automatically. Although no current flows during the transport of the load, the workpiece remains safely clamped like a permanent magnet. Up to 1000 ON/OFF switching cycles by SB 200 / SB 500 and 500 ON/OFF switching cycles by SB 950 are possible before recharging the integrated accu by the supplied mains charger.


Application

- For flat and round material
- Destacking from 4mm sheet thickness by power reduction
- Independent from mains supply
- In mechanical engineering, tool manufacturing, plant engineering, steel construction, shipbuilding,
steel mill, laser-cutting operation, transport company and material store


Professional advantages

- No battery flow during lifting (only a current pulse for a few seconds is required for magnetizing or demagnetizing)
- The magnets are either manually switched via push buttons or automatically via AUTO function
- Power reduction for destacking or low weight loads
- A built in security mechanism prevents switching when the load is suspended
- Option: Positioning drawbar SB 950, swivel-mounted in Z-Axis +/- 60°


Features

- Auto mode is instead of wireless control
- Up to 1000 ON/OFF switching cycles before recharging
- Accu (lithium-ion battery) is charged in approx. 2h mains charger 110V / 230V / 50-60Hz

The permanent magnet handlifters SH (from German production) and HL are suitable for transporting especially thin sheets as well as oily or sharp-edged ones.


Application

- Handling of thin sheets or small flamecut parts
- Max. operation temperature 80°
- For HL / SH the workpiece surface should be clean and dustfree (oil does not effect the magnetic force)


Features

- Mechanical release by pushing the handle
- Horizontal or vertical sheet transport
- Destacking of even 2mm sheet thickness
- Very flat magnetic field, especially designed for thin sheets

Since decades, Crane Transporters of the SH series have been considered to be an economic solution for horizontal or vertical transport by crane. Contrary to other permanent magnet lifters the SH types have a flatter magnetic field especially designed for picking up sheets with 3mm thickness and more. They are a real alternative to mechanical transport clamps, even for support during sheet bending process.


Application

- Suitable for sheets with thickness from 3mm
- Use on clean sheets (oil does not negatively effect magnetism)
- Sheet or plate can be tilted
- Usable in mechanical engineering, tool manufacturing, plant engineering, steel construction,
shipbuilding, steel mill, transport company or materials store


Features

- Mechanical release by handle
- Max. operation temperature 80°C


Options

- Service and repair according to safety regulations
- Rope loop for a soft mountening on the crane hook

The manually switchable permanent lifting magnet is perfect solution for moving thin, ferromagnetic materials (ferrous materials) with a material thickness from 5 mm in an efficient, fast, safe, purposeful and economic way.

Application:

- For flat material from 5 mm thickness, also for separating sheets
- Suitable for raw material, semifinished and finished products because of gentle lifting
- Usable in mechanical engineering, tool manufacturing, plant engineering, steel construction,
shipbuilding, steel mill, transport company or materials store

Features:

- Single-hand operation via hand lever with integrated safety locking
- Max. operation temperature 80°C
- Neodym magnets for small structural shape and high adhesive force
- Equipped with four poles, therefore larger contact surface and particularly flat magnetic field

Options:

- Services: Test according to German Accident Prevention Regulations and repair