Load Lifting Beams with patented full steel EPMagnet Modules

The unmistakable advantages of the lifting magnets Elift from Assfalg are economy and fast handling. The hand-operated Permanent Lifting Magnet is the perfect and fully developed solution for moving all ferromagnetic materials in an efficient, safe and reliable way.


Application

- For flat and round material, because of v-prism pole shoe
- Selected lifter size according to load and for easy operation of the switching level
- For raw material, semi-finished and finished products
- In mechanical engineering, tool manufacturing, plant engineering, steel construction, shipbuilding, transport company or materials store


Professional advantages

- Absolutely safe lifting - with 3-times safety factor(the pull-off strength is 3 times more as the recommended lifting force)
- No restrictions on scaled, rough or oily surfaces
- No damaging of the workpiece surface
- Smooth switching ON/OFF via hand lever
- Optimization of crane capacity and space because of independent permanent magnet lifter
- Smooth lever more when switching OFF provided correct lifter size was selected


Features

- Two-hand operation via hand lever and safety lock
- Max. operation temperature 80°C
- Use of durable and extremely strong neodymium magnet materials
- Compact, sturdy construction, low dead weight

The Electropermanent Battery Lifting Magnets can be used without connection to the power supply. They combine safety of permanent magnets with the operation comfort of electromagnets. Sheets from 6mm thickness can also be separately lifted from stack. Even magnetizing and demagnetizing of the lifting magnet can take place automatically.


Application

- For flat and round material because v-prism pole shoe
- Operation is independent from mains supply
- Usable even for beam operation with 2 magnets
- For raw material, semi-finished and finished products
- In mechanical engineering, tool manufacturing, plant engineering, steel construction, shipbuilding,
steel mill, cutting-, laser operation, transport company or materials store


Professional advantages

- Automatic magnetizing and demagnetizing of the workpiece by AUTO mode
- 3 times safety factor and additional safety feature to drop accidentially the load in the air
- Scaled or rough surface can be mastered
- No current flow during lifting - the magnet is magnetized or demagnetized by pulse current only
- Usable in multi-shift operations, because approx. 300 switches are possible


Features

- Selection between manual or automatic mode
- Max. operation temperature 80°C
- Optical and acoustic alarm device with battery charge level indicator
- Inching for destacking is possible either by power reduction button or by optional wireless remote control
- 300 operation cycles before recharging 8h by mains supply of 110V / 230V

Electropermanent Lifting Magnet

EPM H is for lifting and transporting heavy ferrite blocks or slaps, even with rough surface. The casing is sturdy and equipped with alarm lamp and sound. The square pole technology guarantees a bigger force concentration in the workpiece and bridges airgaps.


Professional advantages

- Unsensitive to rusty or rough workpiece surface
- Low energy consumption because of pulse current for switching
- No drop of workpiece, when power supply fails


Features

- Integrated controller for power supply 40V / 50-60Hz / 32A
- With tower lamp for indicating ON or OFF
- With buzzer for picking up mode
- Max. load dimension 6 m x 2 m
Option:
- radio remote control
- customized application

Electropermanent Lifting Magnet
This EPM M magnets are used for frequent handling of workpieces when mains supply is available.
The switching time is rather short. They combine the safety of permanent magnets with the convenience of electromagnets. Only short pulse current is needed for switching, hence energy consumption is very low.


Professional advantages

- Very short switching cycles
- No drop of workpiece when power supply fails
- Mainly maintenance free
- Reduction of power for destacking from 6mm sheet thickness


Features

- Integrated controller for 400V / 50-60Hz / 16A mains supply
- Max. operation temperature 80°C
- Selection of manual mode or automaticmode
Option:
- radio remote control for destacking
- customized applications

The permanent magnet handlifters SH (from German production) and HL are suitable for transporting especially thin sheets as well as oily or sharp-edged ones.


Application

- Handling of thin sheets or small flamecut parts
- Max. operation temperature 80°
- For HL / SH the workpiece surface should be clean and dustfree (oil does not effect the magnetic force)


Features

- Mechanical release by pushing the handle
- Horizontal or vertical sheet transport
- Destacking of even 2mm sheet thickness
- Very flat magnetic field, especially designed for thin sheets

The permanent magnet handlifter HL 60-CE is especially designed for hot or sharp edged flamecut parts. It gets magnetized and demagnetized over push buttons on the handle. The HL 60-CE accu lasts for 1000 switching cycles before recharging. The charger and an exchange accu are included. The HL 60-CE-L is with long handle.


Field of Application

- Usable in mechanical engineering, tool manufacturing, plant engineering, steel construction, shipbuilding, steel mill, transport company or materials store
- Handling of thin sheets or small flamecut parts
- Max. operation temperature 80°C
- The workpieces should be clean and dustfree (oil doesn´t effect the magnetic force)


Features

- Magnetizing or demagnetizing by push buttons
- Nearby no residual magnetism, therefore unsensitive to dust or chips
- The electrical switching protects the workpiece surface


Scope of Delivery

- Two batteries for charging
- Battery charger

These devices enable securely picking-up curved work pieces, and placing them in presses as well as punching tools and unloading them, then.The hands remain outside the hazard zone - accidents are
avoided.


Features

Generals
- Maximum safety due to permanent magnets
- Heat-resistant up to 80°C
- Easy loosening by mechanical ejector or leverage ELM
- ELM 100-H > Picking-up of checker plates is possible


Applications

- For secure lifting and transporting of sheet-metal, flame-cut parts as well as sharp-edged and
greasy work pieces

These devices enable securely picking-up curved work pieces, and placing them in presses as well as punching tools and unloading them, then.The hands remain outside the hazard zone - accidents are
avoided.


Features

Generals
- Maximum safety due to permanent magnets
- Heat-resistant up to 80°C
- Easy loosening by mechanical ejector or leverage ELM


Applications

- For secure lifting and transporting of sheet-metal, flame-cut parts as well as sharp-edged and
greasy work pieces

These devices enable securely picking-up curved work pieces, and placing them in presses as well as punching tools and unloading them, then.The hands remain outside the hazard zone - accidents are
avoided.


Features

Generals
- Maximum safety due to permanent magnets
- Heat-resistant up to 80°C
- Easy loosening by mechanical ejector or leverage ELM


Applications

- For secure lifting and transporting of sheet-metal, flame-cut parts as well as sharp-edged and
greasy work pieces

These devices enable securely picking-up curved work pieces, and placing them in presses as well as punching tools and unloading them, then.The hands remain outside the hazard zone - accidents are
avoided.


Features

Generals
- Maximum safety due to permanent magnets
- Heat-resistant up to 80°C
- Easy loosening by mechanical ejector or leverage ELM


Applications

- For secure lifting and transporting of sheet-metal, flame-cut parts as well as sharp-edged and
greasy work pieces

These devices enable securely picking-up curved work pieces, and placing them in presses as well as punching tools and unloading them, then.The hands remain outside the hazard zone - accidents are
avoided.


Features

Generals
- Maximum safety due to permanent magnets
- Heat-resistant up to 80°C
- Easy loosening by mechanical ejector or leverage ELM


Applications

- For secure lifting and transporting of sheet-metal, flame-cut parts as well as sharp-edged and
greasy work pieces

The electropermanent battery lifting magnets are suitable for the flat material load range of 200kg / 500kg / 950kg and the round material load range of 50kg / 200kg / 400kg. Using a current pulse of less than one second the electropermanent battery lifters SB 200 / SB 500 / SB 950 from Assfalg are switched manually by pushbuttons or automatically. Although no current flows during the transport of the load, the workpiece remains safely clamped like a permanent magnet. Up to 1000 ON/OFF switching cycles by SB 200 / SB 500 and 500 ON/OFF switching cycles by SB 950 are possible before recharging the integrated accu by the supplied mains charger.


Application

- For flat and round material
- Destacking from 4mm sheet thickness by power reduction
- Independent from mains supply
- In mechanical engineering, tool manufacturing, plant engineering, steel construction, shipbuilding,
steel mill, laser-cutting operation, transport company and material store


Professional advantages

- No battery flow during lifting (only a current pulse for a few seconds is required for magnetizing or demagnetizing)
- The magnets are either manually switched via push buttons or automatically via AUTO function
- Power reduction for destacking or low weight loads
- A built in security mechanism prevents switching when the load is suspended
- Option: Positioning drawbar SB 950, swivel-mounted in Z-Axis +/- 60°


Features

- Auto mode is instead of wireless control
- Up to 1000 ON/OFF switching cycles before recharging
- Accu (lithium-ion battery) is charged in approx. 2h mains charger 110V / 230V / 50-60Hz

The permanent magnet handlifters SH (from German production) and HL are suitable for transporting especially thin sheets as well as oily or sharp-edged ones.


Application

- Handling of thin sheets or small flamecut parts
- Max. operation temperature 80°
- For HL / SH the workpiece surface should be clean and dustfree (oil does not effect the magnetic force)


Features

- Mechanical release by pushing the handle
- Horizontal or vertical sheet transport
- Destacking of even 2mm sheet thickness
- Very flat magnetic field, especially designed for thin sheets

Since decades, Crane Transporters of the SH series have been considered to be an economic solution for horizontal or vertical transport by crane. Contrary to other permanent magnet lifters the SH types have a flatter magnetic field especially designed for picking up sheets with 3mm thickness and more. They are a real alternative to mechanical transport clamps, even for support during sheet bending process.


Application

- Suitable for sheets with thickness from 3mm
- Use on clean sheets (oil does not negatively effect magnetism)
- Sheet or plate can be tilted
- Usable in mechanical engineering, tool manufacturing, plant engineering, steel construction,
shipbuilding, steel mill, transport company or materials store


Features

- Mechanical release by handle
- Max. operation temperature 80°C


Options

- Service and repair according to safety regulations
- Rope loop for a soft mountening on the crane hook