Manual pick-up magnet HM 1

The electrically switchable telescopic arms of the Battery Telescopic Magnetic Beam EPMBL have a range up to1000 mm per side.
This makes them extremely flexible in their use for lifting and transporting processes.
The integrated rechargeable battery box means that no power connection is required.
Sheets from 4 mm thickness of different sheet formats (up to 12 t) can be transported and lifted gently, safely and quickly.
The remote control can be used to operate the tapping function (inching). Sheets with a thickness of 4 mm or more lying in the stack can thus be separated.
With 400 switching cycles, the battery shows high efficiency in its performance.
The electropermanent magnet modules (EPM) are made of solid steel. Electropermanent Magnets combine both electric and permanent Magnet Technology. It is a Permanent Magnet that is switched on and off electrically. When the battery level is low, the load remains on the magnet module without any loss of magnetic force.

Professional advantages:

• No power connection is required
• Telescopic
• Optimum adhesive force for different sheet thicknesses, which can be preselected via a step regulation of the adhesive force
• Magnetic zone selection for different sheet sizes
• ADPREM function prevents random switching in the air
• Usable for different sheet sizes

The unmistakable advantages of the lifting magnets Elift from Assfalg are economy and fast handling. The hand-operated Permanent Lifting Magnet is the perfect and fully developed solution for moving all ferromagnetic materials in an efficient, safe and reliable way.

Application:

• For flat and round material, because of v-prism pole shoe
• Selected lifter size according to load and for easy operation of the switching level
• For raw material, semi-finished and finished products
• In mechanical engineering, tool manufacturing, plant engineering, steel construction, shipbuilding, transport company or materials store

Professional advantages:

• Absolutely safe lifting - with 3-times safety factor(the pull-off strength is 3 times more as the recommended lifting force)
• No restrictions on scaled, rough or oily surfaces
• No damaging of the workpiece surface
• Smooth switching ON/OFF via hand lever 
• Optimization of crane capacity and space because of independent permanent magnet lifter
• Smooth lever more when switching OFF provided correct lifter size was selected

The electro permanent battery lifting magnet SB950-SF is the top product from ASSFALG in the 950kg load range for flat material. 400kg can be lifted for round material. The SB 950-SF has an installed sensor. It measures the magnetic force, compares it with the workpiece weight and shows on the display if the workpiece can be transported. Through electrical impulses within seconds, the electro permanent battery lifting magnet SB950-SF from ASSFALG can be automatically or manually switched with the push of a button. Even though no electricity is present during the load transportation, the workpiece is clamped as securely as it would be with permanent load lifting magnets.

Application:

• For flat and round material
• For single operation or multiple on spreader beams
• For use on crane
• In mechanical engineering, tool manufacturing, plant engineering, steel construction, shipbuilding, steel mill, laser-cutting operation, transport company and material store

Profesional advantages:

• Visual load display
• No current flows during lifting (only an electrical impulse for a few seconds is required for magnetizing or demagnetizing)
• The magnets can be switched manually through a push button or automatically through a pick-up mechanism.
• 3 power levels to lift materials with a thickness starting at 4 mm
• Optical and acoustic warnings for battery charge state

The Electropermanent Battery Lifting Magnets can be used without connection to the power supply. They combine safety of permanent magnets with the operation comfort of electromagnets. Sheets from 6mm thickness can also be separately lifted from stack. Even magnetizing and demagnetizing of the lifting magnet can take place automatically.

Application:

• For flat and round material because v-prism pole shoe
• Operation is independent from mains supply
• Usable even for beam operation with 2 magnets
• For raw material, semi-finished and finished products
• In mechanical engineering, tool manufacturing, plant engineering, steel construction, shipbuilding, steel mill, cutting-, laser operation, transport company or materials store

Professional advantages:

• Automatic magnetizing and demagnetizing of the workpiece by AUTO mode
• 3 times safety factor and additional safety feature to drop accidentially the load in the air
• Scaled or rough surface can be mastered
• No current flow during lifting 
• the magnet is magnetized or demagnetized by pulse current only
• Usable in multi-shift operations, because approx. 300 switches are possible

Electropermanent Lifting Magnet EPM H is for lifting and transporting heavy ferrite blocks or slaps, even with rough surface. The casing is sturdy and equipped with alarm lamp and sound. The square pole technology guarantees a bigger force concentration in the workpiece and bridges airgaps.

Professional advantages:

• Unsensitive to rusty or rough workpiece surface
• Low energy consumption because of pulse current for switching
• No drop of workpiece, when power supply fails

Electropermanent Lifting Magnet This EPM M magnets are used for frequent handling of workpieces when mains supply is available. The switching time is rather short. They combine the safety of permanent magnets with the convenience of electromagnets. Only short pulse current is needed for switching, hence energy consumption is very low.

Professional advantages:

• Very short switching cycles
• No drop of workpiece when power supply fails
• Mainly maintenance free
• Reduction of power for destacking from 6mm sheet thickness

The permanent magnet handlifters SH (from German production) and HL are suitable for transporting especially thin sheets as well as oily or sharp-edged ones. Application - Handling of thin sheets or small flamecut parts - Max. operation temperature 80° - For HL / SH the workpiece surface should be clean and dustfree (oil does not effect the magnetic force) Features - Mechanical release by pushing the handle - Horizontal or vertical sheet transport - Destacking of even 2mm sheet thickness - Very flat magnetic field, especially designed for thin sheets

The permanent magnet handlifter HL 60-CE is especially designed for hot or sharp edged flamecut parts. It gets magnetized and demagnetized over push buttons on the handle. The HL 60-CE accu lasts for 1000 switching cycles before recharging. The charger and an exchange accu are included. The HL 60-CE-L is with long handle. Field of

Application:

• Usable in mechanical engineering, tool manufacturing, plant engineering, steel construction, shipbuilding, steel mill, transport company or materials store
• Handling of thin sheets or small flamecut parts 
• Max. operation temperature 80°C
• The workpieces should be clean and dustfree (oil doesn´t effect the magnetic force)

Features:

• Magnetizing or demagnetizing by push buttons
• Nearby no residual magnetism, therefore unsensitive to dust or chips
• The electrical switching protects the workpiece surface Scope of Delivery
• Two batteries for charging 
• Battery charger

The EPMagnet Modules are switched by mains power supply. They combine the safetyness of permanent magnets with convenience of electromagnets. Sheets from 5mm thickness can be destacked. Magnetizing and demagnetizing of the EPM lifting system can happen manually or by radio remote control. For uneven sheet formats the EPMagnet Modules are equipped with spring suspensions. The EPMagnet modules are integrated in a magnet unit, which is fixed to the beam.

Application:

• Especially for sheet lifting
• Destacking by remote control
• For loading or deloading flamecut systems on trucks
• More flexibility with telescopic beams
• For feeding and clearing of flame-cutting-/laser systems, also in multi-shift operation
• Optional: EPMagnet modules for horizontal and vertical transport

Features:

• EPM lifting systems is ready for use up to the crane hook 
• Power supply is 400V / 50-60Hz / 16A or 32A 
• Lamp and buzzer indicates the magnetization and demagnetization process
• Picking up is done with 70% power and automatically increased to 100% after 10 seconds
• Accidential demagnetization during lifting is prevented by ADPREM safety mechanism
• Different magnetic zones can be selected according to sheet size
• Low energy load consumption because of pulse current for switching
• No drop of load when power supply fails

The electropermanent battery lifting magnets are suitable for the flat material load range of 200kg / 500kg / 950kg and the round material load range of 50kg / 200kg / 400kg. Using a current pulse of less than one second the electropermanent battery lifters SB 200 / SB 500 / SB 950 from Assfalg are switched manually by pushbuttons or automatically. Although no current flows during the transport of the load, the workpiece remains safely clamped like a permanent magnet. Up to 1000 ON/OFF switching cycles by SB 200 / SB 500 and 500 ON/OFF switching cycles by SB 950 are possible before recharging the integrated accu by the supplied mains charger.

Application:

• For flat and round material
• Destacking from 4mm sheet thickness by power reduction
• Independent from mains supply
• In mechanical engineering, tool manufacturing, plant engineering, steel construction, shipbuilding, steel mill, laser-cutting operation, transport company and material store

Professional advantages:

• No battery flow during lifting (only a current pulse for a few seconds is required for magnetizing or demagnetizing)
• The magnets are either manually switched via push buttons or automatically via AUTO function 
• Power reduction for destacking or low weight loads
• A built in security mechanism prevents switching when the load is suspended

The permanent magnet handlifters SH (from German production) and HL are suitable for transporting especially thin sheets as well as oily or sharp-edged ones.

Application:

• Handling of thin sheets or small flamecut parts
• Max. operation temperature 80° - For HL / SH the workpiece surface should be clean and dustfree (oil does not effect the magnetic force)

Features:

• Mechanical release by pushing the handle
• Horizontal or vertical sheet transport
• Destacking of even 2mm sheet thickness
• Very flat magnetic field, especially designed for thin sheets

Since decades, Crane Transporters of the SH series have been considered to be an economic solution for horizontal or vertical transport by crane. Contrary to other permanent magnet lifters the SH types have a flatter magnetic field especially designed for picking up sheets with 3mm thickness and more. They are a real alternative to mechanical transport clamps, even for support during sheet bending process.

Application:

• Suitable for sheets with thickness from 3mm
• Use on clean sheets (oil does not negatively effect magnetism)
• Sheet or plate can be tilted
• Usable in mechanical engineering, tool manufacturing, plant engineering, steel construction, shipbuilding, steel mill, transport company or materials store

Features:

• Mechanical release by handle
• Max. operation temperature 80°C Options