The round Permamax is a very strong Permanent Magnetic Chuck with parallel pole pitch. It is manually switched. It is universally suitable for all kind of ferromagnetic workpieces.
Application:
Universal use, also for small workpieces
Best suitable for flat grinding, internal or external grinding or turning or hard turning
Features:
High power and liquid-tight
The surface can be machined down by 2mm and partially drilled up to 8 mm depth (5 mm at D ? 130 mm)
Mechanically switchable
Workpieces can be clamped stress-free and fast
All-around processing as only one side is clamped magnetically
Adhesive force: up to 140 N/cm2 with pole pitch 12 + 3 mm
These Electropermanent Magnetic Chucks are ideal for clamping distortionfree big discs, rings or bearings for windmills. Even hardened rings can be finished best. Centric holes or through holes can be drilled. All the advantages of fixed and mobile pole extensions of Magnaslot can be used, to reach best surface quality.
Application:
Universal use for clamping ferromagnetic workpieces, particularly on lathes and rotary table grinding machines
Ideal for bearing ring processing, also for hard processing
Professional advantages:
Extremely short set-up times due to simple and fast clamping of workpieces
5-side machining with less stress, less torsions, less vibrations by means of fixed and mobile pole extensions
No damages to the magnetic chuck by breakouts or through machining, if pole extensions are used
Sensible magnet power adjustment for thin workpieces or for aligning
The Neostar is a very strong round Permanent Magnetic Chuck with radial pole pitch. It is manually switched. It is designed for ferromagnetic discs, rings and cylindric workpieces with approx. 80 mm diameter and more. A through hole in the center can be drilled.
Application:
Universal use, particularly for internal and external grinding of cylinders, turning and hard turning
Excellently suitable for clamping rings
Features:
Liquid-tight
Can be switched ON/OFF mechanically
The center is not magnetic and can be drilled through up to the dia. "C"
Workpieces can be clamped stress-free and fast - All-around processing as only one side is clamped magnetically
High power and flat magnetic field (penetrates max. 10mm into workpiece)
We use cookies to optimize our website for you and to be able to improve it continuously. By clicking the "Accept" button, you expressly agree to the use of cookies. For further information on cookies, please refer to our privacy policy.