Permanent Magnetic Chucks Magnet Sinetables are very helpful for angle works on grinding or milling machines, particularly in mould shops. The standard Microsine has the swivel axis in length and is equipped with Microfine. There are also Microsine sinetables with swivel axis in width, or in length and width. Any chuck can be taken in place of Microfine.

Application:

• Universal use, particularly for finishing operations
• For dry and wet machining

Features:

• Liquid-tight
• The standard Microsine is equipped with Microfine Magnetic Chuck
• The magnetic field is flat and the flux penetration in the workpiece is little
• The Microfine surface can be machined down by 2mm and partially drilled up to 8mm
• Workpieces can be fastly clamped with wanted inclination, stress-free
• Tilting angle is precisely set by sinustable and gauge blocks
• 5-side machining as only one side is clamped magnetically
• Adhesive force: 80 N/cm2 with pole pitch 1.5 + 0.5 mm - Swifel range 0 ? 45° (on request 0 - 60°)
• Surface hardened