Modeled after dolphins: Balluff presents solution for monitoring hydraulic clamping devices at EMO
With its new ultrasonic position sensor, the sensor and automation specialist Balluff has developed an innovative solution for controlling hydraulic clamping elements. It is the first product of its kind on the market and has been available since August. The technology is modelled on the echo-location system of dolphins. The product is presented for the first time at the EMO in Hanover.
“Our BFD sensor complements our extensive position detection portfolio and, more importantly, closes the gap with regard to short stroke cylinders,” says Christian Seyfried, Product Manager at Balluff. “Above all, the manufacturers of these components will benefit from this, but so will machinery manufacturers and manufacturing companies that need a complete position detection solution."
Dolphins as role models
Ultrasonic sensors determine distances by measuring the time it takes an ultrasonic wave to travel between transmission and reception. Balluff’s BFD sensor emits ultrasonic waves in the hydraulic fluid of short stroke clamping devices like swivel clamps or block cylinders. The model for this technology can be found directly in nature – namely in dolphins. They also emit ultrasonic waves in the water to gain spatial awareness of their surroundings, find prey, and detect enemies.
Two in one
The BFD sensor, on the other hand, uses ultrasonic waves to detect the clamping process and status directly, continuously, and quickly. By economically recording both values in one sensor, the solution meets the increasing requirements for machine safety. Possible deviations in the oil supply, casting defects, contour differences, or deformed parts can thus be detected at an early stage and maintenance measures can be carried out quickly. “Since the sensor monitors the entire clamping process, customers can also detect and rectify pressure fluctuations in the hydraulic unit, defects in the swivel mechanism, or damaged seals in good time,” Seyfried adds.
Ideally suited for “Plug & Play“
Balluff’s ultrasonic position detection sensor features high-performance measuring capabilities across the entire measuring range (0 to 80mm), a high repeat accuracy of ±50µm, and a linearity deviation of ±250µm. Thanks to its compact design, it can be easily integrated into any workstation. A high pressure resistance of up to 350 bar, IP67 protection, and an operating temperature of between 0 and 85 degrees Celsius allow the use in most hydraulic clamping devices. In addition, the sensor can monitor the position of and control hydraulic valves. It is also used to monitor the clamping of parts in metalworking and in production lines with a very high degree of automation.
“The measuring system constantly adapts to the hydraulic oil currently in use as well as fluctuations in pressure and temperature. In addition to a small form factor and standardized interfaces that can be configured individually, this makes the BFD sensor ideal for “Plug and Play” applications in several different media – and allows for continuously reliable operations without any calibration,” Seyfried explains.
Keeping an eye on the status quo with Condition Monitoring
In connection with IO-Link, the sensor provides further important condition data about signal quality or the temperature of the device and detects critical changes such as air or particles in the hydraulic system. “The measuring system works with high precision and detects even the smallest tolerance deviations of the clamped components,” says Seyfried and adds: “The position data of the clamps are automatically matched with the individual parts, facilitating effective quality assurance.” With inductive couplers (BIC), analog-digital hubs, or IO-Link Wireless components, solutions for wireless integrations are also available.
With its new ultrasonic position sensor, the sensor and automation specialist Balluff has developed an innovative solution for controlling hydraulic clamping elements. It is the first product of its kind on the market and has been available since August. The technology is modelled on the echo-location system of dolphins. The product is presented for the first time at the EMO in Hanover.
“Our BFD sensor complements our extensive position detection portfolio and, more importantly, closes the gap with regard to short stroke cylinders,” says Christian Seyfried, Product Manager at Balluff. “Above all, the manufacturers of these components will benefit from this, but so will machinery manufacturers and manufacturing companies that need a complete position detection solution."
Dolphins as role models
Ultrasonic sensors determine distances by measuring the time it takes an ultrasonic wave to travel between transmission and reception. Balluff’s BFD sensor emits ultrasonic waves in the hydraulic fluid of short stroke clamping devices like swivel clamps or block cylinders. The model for this technology can be found directly in nature – namely in dolphins. They also emit ultrasonic waves in the water to gain spatial awareness of their surroundings, find prey, and detect enemies.
Two in one
The BFD sensor, on the other hand, uses ultrasonic waves to detect the clamping process and status directly, continuously, and quickly. By economically recording both values in one sensor, the solution meets the increasing requirements for machine safety. Possible deviations in the oil supply, casting defects, contour differences, or deformed parts can thus be detected at an early stage and maintenance measures can be carried out quickly. “Since the sensor monitors the entire clamping process, customers can also detect and rectify pressure fluctuations in the hydraulic unit, defects in the swivel mechanism, or damaged seals in good time,” Seyfried adds.
Ideally suited for “Plug & Play“
Balluff’s ultrasonic position detection sensor features high-performance measuring capabilities across the entire measuring range (0 to 80mm), a high repeat accuracy of ±50µm, and a linearity deviation of ±250µm. Thanks to its compact design, it can be easily integrated into any workstation. A high pressure resistance of up to 350 bar, IP67 protection, and an operating temperature of between 0 and 85 degrees Celsius allow the use in most hydraulic clamping devices. In addition, the sensor can monitor the position of and control hydraulic valves. It is also used to monitor the clamping of parts in metalworking and in production lines with a very high degree of automation.
“The measuring system constantly adapts to the hydraulic oil currently in use as well as fluctuations in pressure and temperature. In addition to a small form factor and standardized interfaces that can be configured individually, this makes the BFD sensor ideal for “Plug and Play” applications in several different media – and allows for continuously reliable operations without any calibration,” Seyfried explains.
Keeping an eye on the status quo with Condition Monitoring
In connection with IO-Link, the sensor provides further important condition data about signal quality or the temperature of the device and detects critical changes such as air or particles in the hydraulic system. “The measuring system works with high precision and detects even the smallest tolerance deviations of the clamped components,” says Seyfried and adds: “The position data of the clamps are automatically matched with the individual parts, facilitating effective quality assurance.” With inductive couplers (BIC), analog-digital hubs, or IO-Link Wireless components, solutions for wireless integrations are also available.