Cutting tools

* Very long service life, thanks to the use of selected carbides* High cutting capacity * Very good chip removal * Reduced build-up of chips due to special grinding * Very soft cut due to optimal cutting geometry * No carbide corrosion

Countersink for drill deburrers and spindles of type BE, BEW, BEG 90° HSS countersink for straight drill deburrers: available countersink diameter: Ø 6.5 mm for countersink range 2.0 - 5.5 mm (countersink shank Ø 3 mm) Ø 15.0 mm for countersink range 3.5 - 14.0 mm (countersink shank Ø 8 mm) Ø 25.0 mm for countersink range 5.0 - 24.0 mm (countersink shank Ø 8 mm) Ø 30.0 mm for countersink range 6.0 - 29.0 mm (countersink shank Ø 10 mm) 90° HSS or HM countersink for angle drill deburrers: available countersink diameter: Ø 8.0 mm for countersink range 2.0 - 6.0 mm (shank 3/6 square) Ø 12.0 mm for countersink range 2.5 - 10.0 mm (shank 3/hexagon) Ø 15.0 mm for countersink range 3.5 - 14.0 mm (shank 6.3/hexagon / shank Ø 6 mm) Ø 25.5 mm for countersink range 5.0 - 24.0 mm (shaft Ø 6 mm)

BIAX saw blade for pneumatic saws type PS 1, PS 2, PS 2 Plus, PS 3, PS 8, PS 25, PLF 90, FR 10-5/2 Our saw blades: · set high standards in terms of service life and efficiency · deliver the very best cutting performance · are extremely flexible and resistant to breakage The teeth are made from high-quality HS steel. The supporting material is made from special spring steel which has been subject to specific heat treatments to ensure maximum flexibility, resilience and freedom from fatigue. Available tooth types: 14 tpi, 18 tpi, 24 tpi, 32 tpi *tpi = tooth per inch