Angle grinders - WRD 6-20/3Z

These small-powerful angle grinders have a flat head, robust gears and, with their double bearing sets, are superbly suited to transferring high torque.You have the choice of two tool-receiving sockets:

?6 mm collet
?M10 mounting thread

The angle head of this machine is very small. Carrying out good work in very inaccessible places is now much easier. Another advantage: the drive is in the angle head. This means that gears are not required, meaning less weight and no wear.

The finish of the angle grinder with elongated neck and a small angle head is particularly suited to working in not easy to reach places with a high degree of precision and performance.Two versions are available:
version with 90° head (ZL 90)
version with 45° head (ZL 45)

The finish of the angle grinder with elongated neck and a small angle head is particularly suited to working in not easy to reach places with a high degree of precision and performance.Two versions are available:
version with 90° head (ZL 90)
version with 45° head (ZL 45)

These small-powerful angle grinders have a flat head, robust gears and, with their double bearing sets, are superbly suited to transferring high torque.You have the choice of two tool-receiving sockets:

* 6 mm collet
* M10 mounting thread

This BIAX pneumatic angle grinder has its drive in the angle head and works without fault-prone gears - and is very powerful.

The angle head of this machine is very small. Carrying out good work in very inaccessible places is now much easier. Another advantage: the drive is in the angle head. This means that gears are not required, meaning less weight and no wear.

The finish of the angle grinder with elongated neck and a small angle head is particularly suited to working in not easy to reach places with a high degree of precision and performance.Two versions are available:
version with 90° head (ZL 90)
version with 45° head (ZL 45)

The finish of the angle grinder with elongated neck and a small angle head is particularly suited to working in not easy to reach places with a high degree of precision and performance.Two versions are available:
version with 90° head (ZL 90)
version with 45° head (ZL 45)

These small-powerful angle grinders have a flat head, robust gears and, with their double bearing sets, are superbly suited to transferring high torque. You have the choice of two tool-receiving sockets:

?6 mm collet
?M10 mounting thread

With the reduced speed of 10.000 rpm and the double bearing sets, this machine is perfectly suited to demanding polishing and grinding work. The low weight and noise also make the user?s experience more pleasant.

A device that is used for engraving and chiselling. The following accessories are included:1 style made of hard metal, different chisels, a chisel blank and an extension pipe

Extremely low-vibration machine. Designed for fine polishing of moulds. High stroke speed combined with short strokes enable
controlled machining of surfaces. This reduces the likelihood of damaging the mould. The tool is also suitable for the most delicate deburring work.

Extremely low-vibration machine. Convenient deburring file for small components that have to be held by hand while being deburred. Perfect for applications in which only a very small level of material removal is required.

This newly developed device is suitable for the same applications as the PLF 88 file. The special thing about this machine is that it hardly vibrates during operation and the easy to adjust stroke length. This patented vibration dampening in accordance with the Vibration Directive protects you and the tool.

This is a vibration-damped machine, which makes it ideal for continuous operation for polishing or deburring. The stroke length can be adjusted, and the exhaust air direction can be changed in order to blow grinding dust forwards.

This newly developed device is suitable for the same applications as the PLF 88 file. The special thing about this machine is that it hardly vibrates during operation and the easy to adjust stroke length. This patented vibration dampening in accordance with the Vibration Directive protects you and the tool.

This is a vibration-damped machine, which makes it ideal for continuous operation for polishing or deburring. The stroke length can be adjusted, and the exhaust air direction can be changed in order to blow grinding dust forwards.

Its 6 mm tool-receiving socket, the stable finish and the almost maintenance-free reciprocating engine make this filer an indispensable tool even when under extreme and continuous strain - for instance rough machining of casted parts.

These pistol-design files are identical in construction. The stroke length of the FR 3-8 is set to 3 mm. The stroke length of the FR 5-8 N is set to 5 mm. Due to it?s low weight the machine is ideal for machining aluminum.

This version has a very powerful motor. The stroke length and the number of strokes can be set. The device comes with a rotary valve.

Machine with adjustable speed and stroke length. The file holder can be rotated during operation.
Constant stroke length even under high loads.

These pistol-design files are identical in construction. The stroke length of the FR 3-8 is set to 3 mm. The stroke length of the FR 5-8 N is set to 5 mm. Due to it?s low weight the machine is ideal for machining aluminum.

This device has been designed for simple filing and deburring Work.
A simple yet robust tool with adjustable stroke length and speed.

An incredibly robust device that will master even the hardest jobs. The stroke length is set to 8 mm, the number of strokes is set to 2000 per minute.

This powerful multi-purpose device has been designed for filing, deburring, polishing and cutting. In the lower vertical adjustment area this filing device is particularly powerful.