Scraping blade universal - 30 / 150 R 140

This device is a version of the BE 805, which has a lever valve instead of a push start. The control button on the side allows you to switch between clockwise and counterclockwise rotation. The machine is superbly suited to brushing holes. By changing the direction of rotation the life of the brush can be increased many times over.

BIAX clamp holder for scraping blades
Extended, flexible
Dimensions (L x W) 135 x 23 mm

BIAX clamp holder for scraping blades
Turned, for places of difficult access
Dimensions (L x W) 134 x 23 mm

BIAX clamp holder for scraping blades
For scraping at points with difficult access in conjunction with scraping blades
Dimensions (L x W) 170 x 24 mm

BIAX clamp holder for blade inserts R 60, R 90, R120, R150
For scraper type HM 10
Dimensions (L x W) 75 x 20 mm

BIAX clamp holder for scraping blades
Standard, short type
Dimensions (L x W) 85 x 23 mm

BIAX Control gauge
Can be used as grinding gauge, for control scraping blade radius,
for controlling bearing points, for cleaning particles from the workpiece
Dimensions (L x W) 60 x 50 mm

This drill deburrer can be used to deburr holes up to a Ø of 24 mm. This version features a push start. The BIAX hose unit is included with this model.

With a countersinking diameter of up to 29 mm and a speed of 550 rpm the BE 1005 R is our biggest and most powerful drill deburrer. The spindle is switched on and off via the supply air.

This drill deburrer can be used to deburr holes up to a Ø of 5.5 mm. The version BE 309 R features a push start. The BIAX hose unit is included with this model.

This drill deburrer can be used to deburr holes up to a Ø of 5.5 mm. It is switched on and off using the supply air. The BIAX hose unit is included with this model.

This drill deburrer can be used to deburr holes up to a Ø of 24 mm. This version is switched on and off using the supply air. The BIAX hose unit is included with this model.

Our top device when it comes to deburring holes in difficult to reach areas. The height of the drive head is only 20,5 respectively 21,5 mm (depending on the countersink version). The drive can be adjusted in the range of 0-900 rpm. The BIAX hose unit and an HSS countersink Ø 2-6 mm are included with this model.
Also available:
- Countersink range Ø 2-6 mm: Order no. HSS 001 950 293 (incl.) / Order no. HM 001 950 299
- Countersink range Ø 2.5-10 mm: Order no. HSS 001 950 297

This machine has an angular design which allows the deburring of holes in difficult to reach areas up to a countersinking diameter of 24 mm. Typically these are holes with transverse bores. The BIAX hose unit is included with this model.
Also available:
- Countersink range Ø 3.5-14 mm: Order no. HSS 001 950 295
- Countersink range Ø 5-24 mm: Order no. HSS 001 950 296

This angle-design machine allows you to deburr holes in hard to reach areas, e.g. holes in cross holes, which have to be deburred from the inside.

This variant of the proven BIAX hole deburrer has an improved leverage effect due to its shortness so that deburring can take place with little pressure.

This angle-design machine allows you to deburr holes in very difficult-to-reach places, e.g. holes in cross holes, which have to be deburred from the inside. The measurement drawings below show the different head sizes. Adjustable speed from 0 to 600 RPM.

This variant of the proven BIAX hole deburrer has an improved leverage effect due to its shortness so that deburring can take place with little pressure.

Our top device when it comes to deburring in difficult-to-reach
places, such as holes in cross holes. The height (excluding countersink) of the very low-wear drive head is just
15 mm and can, therefore, also reach very narrow places.
The extremely quiet and light drive can be set from 0 to 900 RPM
and has very low air consumption: 150 l/min.

The straight drilling deburrers come in three different sizes for different holes. The push start makes handling easier and you can also regulate the speed.

The straight drilling deburrers come in three different sizes for different holes. The push start makes handling easier and you can also regulate the speed.

The straight drilling deburrers come in three different sizes for different holes. The push start makes handling easier and you can also regulate the speed.

If it is not possible to set the countersink correctly, this lever version is recommended.

BIAX Universal Scraper, light model, particularly suitable for:
? plastic scraping
? standard scraping
? fine scraping
? precision scraping and oil-tight scraping.
Also suitable for dovetail guides and prisms in conjunction with special blades.

AC Voltage: 115 Volt
Electronically variable strokes up to: 0-1,800 per minute
Infinitely variable stroke length: 0-10 mm
Power consumption: 320 watts
Noise level: 82 dB(A)
Weight: 2,7 kg
Dimensions (L x W x H): 385 x 67 x 92mm

Included Accessories
1 x special oil 30 ml (001365635)
1 x scraping blade 20x90 R60 (001400405)
1 x hexagonal wrench key SW6 (001363502)
1 x hexagonal wrench key SW4 (001363503)