Our top device when it comes to deburring holes in difficult to reach areas. The height of the drive head is only 20,5 respectively 21,5 mm (depending on the countersink version). The drive can be adjusted in the range of 0-900 rpm. The BIAX hose unit and an HSS countersink Ø 2-6 mm are included with this model.
Also available:
- Countersink range Ø 2-6 mm: Order no. HSS 001 950 293 (incl.) / Order no. HM 001 950 299
- Countersink range Ø 2.5-10 mm: Order no. HSS 001 950 297
This drill deburrer can be used to deburr holes up to a Ø of 24 mm. This version features a push start. The BIAX hose unit is included with this model.
With a countersinking diameter of up to 29 mm and a speed of 550 rpm the BE 1005 R is our biggest and most powerful drill deburrer. The spindle is switched on and off via the supply air.
This drill deburrer can be used to deburr holes up to a Ø of 5.5 mm. The version BE 309 R features a push start. The BIAX hose unit is included with this model.
This drill deburrer can be used to deburr holes up to a Ø of 5.5 mm. It is switched on and off using the supply air. The BIAX hose unit is included with this model.
This drill deburrer can be used to deburr holes up to a Ø of 24 mm. This version is switched on and off using the supply air. The BIAX hose unit is included with this model.
This machine has an angular design which allows the deburring of holes in difficult to reach areas up to a countersinking diameter of 24 mm. Typically these are holes with transverse bores. The BIAX hose unit is included with this model.
Also available:
- Countersink range Ø 3.5-14 mm: Order no. HSS 001 950 295
- Countersink range Ø 5-24 mm: Order no. HSS 001 950 296
This spindle is designed to be very compact, yet has enough power for light grinding and milling.
Also available: splash guard and counterclockwise rotation.
Technical Data:
Order number: 150412702
Power [W]: 200
Air consumption [l/min]: 400
Vibrations [m/s²]: < 2,5
Revolutions per minute [min¯¹]: 32.000
Engine type: Vane
Exhaust air direction: Backwards
Front bearing set: Paired
Noise level [db (A)]: 75
Weight [g]: 365
Max. tool shank Ø [mm]: 6
Max. carbide tool Ø [mm]: 8
Fitting hose unit: 001366529 (not inclusive)
This spindle is designed to be very compact, yet it is equipped with a powerful Motor for grinding and milling.
Also available: Splash guard and spindle with counterclockwise rotation.
This spindle is designed to be very compact, yet it is equipped with a powerful Motor for grinding and milling.
Also available: Splash guard and spindle with counterclockwise rotation.
This spindle guarantees a high stock removal. The power of this spindle is sufficient to drive carbide tools up to 12 mm and profile grinding wheels up to 24 mm.
with its 12,000 rpm this spindle is particularly suitable for tools that require high torque at low speed. At 400 watts this is our most powerful milling and grinding spindle.
The high speed and concentricity of this spindle produces a very clean grinding pattern and it is therefore ideally suited for fine grinding, milling and engraving. The paired heavy duty bearings ensure long service life. This model includes the BIAX hose unit with silencer.
This spindle is particularly suitable for brushing and drilling as they are equipped with a particularly high-torque motor. The integrated gearing reduces the speed and increases the torque.
This spindle is particularly suitable for brushing and drilling as they are equipped with a particularly high-torque motor. The integrated gearing reduces the speed and increases the torque.
The RB 4102 with 1,700 rpm has been specially equipped for drilling with a drill chuck. Tool shanks of up to 10 mm can be clamped infinitely variably. The drilling and brushing spindles are equipped with double-row bearings that are able to withstand the high forces.
Attention: counterclockwise rotation! This spindle guarantees a high stock removal. The power of this spindle is sufficient to drive carbide tools up to 12 mm and profile grinding wheels up to 24 mm.
Model T 27-40 with its reduced speed of 40,000 rpm at 3 bar is particularly suitable for drilling rubber. Drills of up to 5mm diameter can be used for this application.
This spindle is ideal for fine grinding, milling and engraving surfaces that must not be oil lubricated. The centrifugal governor ensures constant speed and reduces air consumption.
This high-speed spindle is particularly suitable for the use with the finest milling and grinding tools. The elastic front bearing enables the production of surfaces of the highest quality. A further application is the drilling of rubber.
The lubricant-free drive of this grinding spindle based on a vane motor is unique and patented. Its great advantage:
It provides the high performance of a vane motor and can still work completely lubrication-free. This model includes the BIAX hose unit with silencer.
Manufactured to an excellent standard of quality, the system allows tools to be changed regardless of working position
thanks to a built-in coupling, into which the quick-change tool holder engages and can be removed again by pushing back the coupling sleeve. The machine does not have to be moved to a specific working position in order to do this.
We use cookies to optimize our website for you and to be able to improve it continuously. By clicking the "Accept" button, you expressly agree to the use of cookies. For further information on cookies, please refer to our privacy policy.