Friedrich Britsch GmbH & Co.KG
Products
everything. always. quick.
206
Tooling systems
Tool holders
ER-collet metallic sealed
|
Collet
Friedrich Britsch GmbH & Co. KG
Tool holders
ER-collet metallic sealed.
Available for following ER-collets: ER16MD, ER20MD, ER25MD, ER32MD
Also available in high precision (UP)
ER-collet sealed
|
Collet
Friedrich Britsch GmbH & Co. KG
Tool holders
ER-collet DIN6499 A sealed with special rubber.
For coolant pressure up to 80 bar.
Available for following ER-collets: ER11S, ER16S, ER20S, ER25S, ER32S, ER40S
ER-Tapping collets with length adjustment
|
Collet
Friedrich Britsch GmbH & Co. KG
Tool holders
Advantages:
- Spline drive, espacially for stable tapping
- Length compensation by tension
- Precise torque
- Exact guiding
ER-Floating reamer collet
|
Collet
Friedrich Britsch GmbH & Co. KG
Tool holders
Advantages:
- Collets for floating reamers and for rigid drilling with floated balance
- Floating collets replacing a floating holder
- Particularly used in driven tools
Tool holding fixtures
ER-collet metallic sealed
|
|
Collet
Friedrich Britsch GmbH & Co. KG
Tool holding fixtures
ER-collet metallic sealed.
Available for following ER-collets: ER16MD, ER20MD, ER25MD, ER32MD
Also available in high precision (UP)
ER-collet sealed
|
|
Collet
Friedrich Britsch GmbH & Co. KG
Tool holding fixtures
ER-collet DIN6499 A sealed with special rubber.
For coolant pressure up to 80 bar.
Available for following ER-collets: ER11S, ER16S, ER20S, ER25S, ER32S, ER40S
ER-Tapping collets with length adjustment
|
|
Collet
Friedrich Britsch GmbH & Co. KG
Tool holding fixtures
Advantages:
- Spline drive, espacially for stable tapping
- Length compensation by tension
- Precise torque
- Exact guiding
ER-Floating reamer collet
|
|
Collet
Friedrich Britsch GmbH & Co. KG
Tool holding fixtures
Advantages:
- Collets for floating reamers and for rigid drilling with floated balance
- Floating collets replacing a floating holder
- Particularly used in driven tools
Tool holders
ER-Collet Holder
|
Collet chuck
Friedrich Britsch GmbH & Co. KG
Tool holders
ER-Collet Holder for ER-Collets ER08,ER11,ER16,ER20,ER25,ER32,ER40 All holders will be supplied with a clamping nut. Runout accuracy ER-collet holder < 5µ Available in several shank diameters with radial inner coolant lead in (IK), with clamping flat throughout (WD) or with clamping flat stepped (FL).
ER-Collet Holder with lateral coolant connection
|
Collet chuck
Friedrich Britsch GmbH & Co. KG
Tool holders
ER-Collet Holder for ER-Collets ER16,ER20,ER25
All holders will be supplied with a sealed clamping nut.
Runout accuracy ER-collet holder < 5µ
Available lateral coolant connections: M12x1,5 (AK0), G1/8" (AK1), M8x1 (AK2), M10x1 (AK3)
ER-Double Holders with same collets
|
Collet chuck
Friedrich Britsch GmbH & Co. KG
Tool holders
ER-Double Holders for ER-Collets ER08,ER11,ER16,ER20,ER25 All double holders will be supplied with clamping nuts. Runout accuracy ER-double collet holders < 5µ Available in several shank diameters with clamping flat throughout (WD) or with clamping flat stepped (FL)
Modular Quick Change System
|
Tool holder
Friedrich Britsch GmbH & Co. KG
Tool holders
Modular quick tool change system in various shank designs and insert types.
Changing the head is possible without removing the basic holder from the tool carrier.
Very precise fit of the head. Precisely fitting, rigid fastening.
Available for left and right inserts.
Changing the head is possible without removing the basic holder from the tool carrier.
Very precise fit of the head. Precisely fitting, rigid fastening.
Available for left and right inserts.
Modular system of tool-holders with cylindrical shaft
|
Collet chuck
Friedrich Britsch GmbH & Co. KG
Tool holders
Quick change with cylindrical shaft for ER-Collets. Available for ER16 collets.
- Ultra precise fitting of the interchangeable head. Rigid fixation.
- With inner coolant. Hydraulic connector G1/8“
- Quick change, without having to remove the tool-holder from the drill unit
- Presetting is possible outside of the machine
- Available tool-holder diameters : 22 mm, 25 mm and 3/4”
Tool holding fixtures
ER-Collet Holder
|
|
Collet chuck
Friedrich Britsch GmbH & Co. KG
Tool holding fixtures
ER-Collet Holder for ER-Collets ER08,ER11,ER16,ER20,ER25,ER32,ER40 All holders will be supplied with a clamping nut. Runout accuracy ER-collet holder < 5µ Available in several shank diameters with radial inner coolant lead in (IK), with clamping flat throughout (WD) or with clamping flat stepped (FL).
ER-Collet Holder with lateral coolant connection
|
|
Collet chuck
Friedrich Britsch GmbH & Co. KG
Tool holding fixtures
ER-Collet Holder for ER-Collets ER16,ER20,ER25
All holders will be supplied with a sealed clamping nut.
Runout accuracy ER-collet holder < 5µ
Available lateral coolant connections: M12x1,5 (AK0), G1/8" (AK1), M8x1 (AK2), M10x1 (AK3)
ER-Double Holders with same collets
|
|
Collet chuck
Friedrich Britsch GmbH & Co. KG
Tool holding fixtures
ER-Double Holders for ER-Collets ER08,ER11,ER16,ER20,ER25 All double holders will be supplied with clamping nuts. Runout accuracy ER-double collet holders < 5µ Available in several shank diameters with clamping flat throughout (WD) or with clamping flat stepped (FL)
Modular Quick Change System
|
|
Tool holding fixture
Friedrich Britsch GmbH & Co. KG
Tool holding fixtures
Modular quick tool change system in various shank designs and insert types.
Changing the head is possible without removing the basic holder from the tool carrier.
Very precise fit of the head. Precisely fitting, rigid fastening.
Available for left and right inserts.
Changing the head is possible without removing the basic holder from the tool carrier.
Very precise fit of the head. Precisely fitting, rigid fastening.
Available for left and right inserts.
Modular system of tool-holders with cylindrical shaft
|
|
Collet chuck
Friedrich Britsch GmbH & Co. KG
Tool holding fixtures
Quick change with cylindrical shaft for ER-Collets. Available for ER16 collets.
- Ultra precise fitting of the interchangeable head. Rigid fixation.
- With inner coolant. Hydraulic connector G1/8“
- Quick change, without having to remove the tool-holder from the drill unit
- Presetting is possible outside of the machine
- Available tool-holder diameters : 22 mm, 25 mm and 3/4”
Tool holders
BIMU Inserts systems & accessories
|
Tool holder
Friedrich Britsch GmbH & Co. KG
Tool holders
Our extensive range of inserts and accessories offers everything you need for the production of your turned parts. Benefit from our diversified portfolio of inserts for CNC swiss type lathes, fixed head automatic lathes, multi-spindle lathes and rotary transfer machines.
Ground inserts, special inserts, ISO inserts, modular tool system, insert holders – also with internal coolant, turning tools for backworking and much more.
Ground inserts, special inserts, ISO inserts, modular tool system, insert holders – also with internal coolant, turning tools for backworking and much more.
Tool holding fixtures
BIMU Inserts systems & accessories
|
|
Tool holding fixture
Friedrich Britsch GmbH & Co. KG
Tool holding fixtures
Our extensive range of inserts and accessories offers everything you need for the production of your turned parts. Benefit from our diversified portfolio of inserts for CNC swiss type lathes, fixed head automatic lathes, multi-spindle lathes and rotary transfer machines.
Ground inserts, special inserts, ISO inserts, modular tool system, insert holders – also with internal coolant, turning tools for backworking and much more.
Ground inserts, special inserts, ISO inserts, modular tool system, insert holders – also with internal coolant, turning tools for backworking and much more.
IFANGER MicroTurn System
|
Tool holding fixture
Friedrich Britsch GmbH & Co. KG
Tool holding fixtures
Boring tools, copying tools, threading tools, grooving tools, chamfering tools, tools for axial plunging, tool holders with round shank, cranked tool holders and much more.
Tool holders
Toolholders for lathes
|
Tool holder
Friedrich Britsch GmbH & Co. KG
Tool holders
ER collet holders, ER double holders, milling arbors, tap holders, reamer holders, broaching tools, boring bars,
knurl holders, VDI tool holders and much more.
knurl holders, VDI tool holders and much more.
Solid carbide & HSS cutting tools
|
Tool holder
Friedrich Britsch GmbH & Co. KG
Tool holders
Twist drills, center drills, reamers, circular saw blades, end mills, taps, thread rolling dies, knurling wheels, broaching tools, dies and much more.
Tool holding fixtures
Solid carbide & HSS cutting tools
|
|
Tool holding fixture
Friedrich Britsch GmbH & Co. KG
Tool holding fixtures
Twist drills, center drills, reamers, circular saw blades, end mills, taps, thread rolling dies, knurling wheels, broaching tools, dies and much more.
Loading ...
