ZIMMER Z185R

•  
  Reference number 1035-04495

  Operation Hours not applicable

• Vendor

  Schmeisser Werkzeugmaschinen
  Lochfelbenstr. 2
  89312 Günzburg

  Germany

  

• Main Category

  Metal working machines

• Category

  Sawing, Filing and Cutting-off Machines

• Type of Machine

  Band Sawing Machines (Horizontal)

• Manufacturer

  ZIMMER

• Technical data

  cutting diameter

  185 mm

  saw band length

  2.080 x 20 x 0,90 mm

  cutting width

  100x185 mm

  connected load frequency

  230 V

  band speed

  35 und 70 stufenlos m/min

  mitre joint 90° (angle-iron till)

  60 °

  total power requirement

  2,35 KW

  weight of the machine ca.

  195 kg

  dimensions of the machine ca.

  1280 x 550 x 1480 mm

• Description

  We must ask you to request machines from us on a daily basis in the near future.
  
  Please notice:
  We would be happy to make you a free offer. However, please understand that we
  only process inquiries with complete address details.
  
  
  An inexpensive and powerful band saw for sporadic workshop use
  
  The Zimmer Z185 / R is a self-lowering saw for miter cuts from 0 ° -
  60 ° left.
  After the cut, the machine stops due to a safety limit switch.
  The lowering is continuously adjustable via a hydraulic system.
  The manual lifting of the saw arm after the cut can - on any
  Position. The saw arm remains in the desired position.
  
  * Metal band saw with stepless electronic speed regulation and
  automatic lowering
  * Selector switch for hydraulically controlled or manual belt arm lowering
  * Saw arm can be swiveled up to 60 ° to the right
  * Quick release vice
  * Tape guide with 8 ball bearings
  * Hydraulic saw band tensioning with tensioning pressure display and cut off of
  the band breakage
  * including coolant device
  * including machine base cabinet
  
  The Z185 / R has the following standard equipment:
  
  - hydraulic cylinders
  - emulsion pump
  - eccentric clamp
  - underframe
  - saw band
  
  The machine is fully assembled and delivered immediately ready for use
  
  Technical specifications:
  Motor power: 230 V / 2.35 kW
  Cutting speed: 30 - 75 m / min. stepless
  Saw band dimensions: 2.085 x 20x 0.9 mm
  Footprint: 550 x 1,280 x 1,480 mm
  Working height: 915 mm
  Weight: 190 kg
  
  
  
  This ad was created with MODUL MWS - the software solution of LogoTech.

• State

  Used