TBT BWP 250

•  
  Reference number 1049-410847

  Manufacture Year 1996

  Operation Hours not applicable

• Vendor

  Hans-Jürgen Geiger Maschinen-Vertrieb GmbH
  James-Watt-Straße 12
  72555 Metzingen

  Germany

  

• Main Category

  Metal working machines

• Category

  Drilling machines

• Type of Machine

  Deep Hole drilling machines (Horizontal)

• Manufacturer

  TBT

• Technical data

  core drilling diameter max.

  25 mm

  bore depth

  1000 mm

  swing diameter

  mm

  total power requirement

  25 kW

  weight of the machine ca.

  12,5 t

  dimensions of the machine ca.

  m

• Description

  T B T (Germany)
  CNC-Controlled Horizontal Deep Hole Drilling " Centre "
  Model BWP 250
  Year 1996, but reconditioned mechanically and electrically in 2006
  ___________________________________________________________________________________
  
  Working range: X Axis, machine column cross 2,000 mm
  Z Axis, drilling slide horizontal 1,200 mm
  Drilling depth 1.000 mm
  Y Axis, drilling slide vertical 1,100 mm
  
  Table clamping area 1,200 x 2,000 mm
  
  Drilling capacity in solid material, approx. 4 - 25 mm
  Tool holder taper HSK 50
  Spindle speeds 1.260 - 15,000 rpm
  
  Feed rates / quickfeed, XYZ,
  infinitely variable 100 - 10,000/15.000 mm/min.
  Force rate of feed motors 27 Nm / 1.000 daN
  
  Spindle drive steplessly adjustable 7 kW
  Total electrical load, approx. 30 kW - 400 V - 50 Hz
  Weight, approx. 10,000 kg
  
  Accessories / Special Features:
  
  " Ideal machine for the complete processing of large workpieces like tool a. dies (cooling holes) mould- and dieplates, hydraulicparts etc. by means of deep hole drilling up to 25 x 1.000 mm, face milling up to Ø 60 mm, spiral twist drilling, counterboring and threading up to M 24 x 3 mm.
  " SIEMENS Continuous Path Control in 4 axes Model 840 D, with process monitoring for coolant pressure, operation data control function, toollife, feed force,Error diagnostics and easy dialogueprogramming directly on the panel, etc.
  " High Frequency Spindle Make GAMFIOR with stepless speeds
  " Hydraulically movable drill bush carrier, swivels 90° for holding gun drills (ELB) or picking up regular tools from the tool changer like twist drills, milling tools, taps, etc.
  " With automatic tool changer made by MIKSCH, Model CTM 40, using a 12-position tool changer, which is mounted on the r.h.side of machine housing, in fixed position, only moving forward and backward for tool changing operation.
  " Built-on indexing table as B-Axis made by FIBRO Model RTN 400 = 420 x 420 mm,
  " Extra Rotary Table made by FIBRO with Ø 1.000mm, for indexing 3-144 positions
  " Built-in coolant device with chip conveyor and various filters.
  " 2 steady rests.
  " Completely covered working area with access at the front and at the side.
  
  Condition : Very good condition. This is a rare and valuable machine. Under Power
  Delivery : immediately ex our Stock
  Payment : Net, after conclusion of contract.
  
  
  This ad was created with MODUL MWS - the software solution of LogoTech.

• State

  Used