DMC 200 U (Reference-Nr. 020312)

•  
  Reference number 020312

  Manufacture Year 2007

  Operation Hours not applicable

• Vendor

  DMG MORI EMEA Holding GmbH
  Walter-Gropius-Str.7
  80807 München

  Germany

  

• Main Category

  Metal working machines

• Category

  Machining centres

• Type of Machine

  Machining centres (Universal)

• Manufacturer

  DMG MORI

• Control

  Heidenhain

• Description

  
  

  Technical Data
  Feed rate longitudinal/transverse/vertical	15000/15000/15000 mm/min
  Rapid traverse longitudinal/transverse/vertical	60/40/40 m/min
  General
  Universal machining centre; Control: 3D control Heidenhain iTNC 530
  Working area 1
  Longitudinal	1800 mm
  Cross	2000 mm
  Vertical	1100 mm
  Miscellaneous
  Clamping System	HSK-A 100
  Tool changer
  Type of magazine	Chain
  Tool changer plane	vertical

• Specification

  
  

  Prod. package 40 bar/23 l/min	Coolant through spindle centre form AD 40 bar/23 l/min / 580 psi/6 gallon/min (theoretical pump performance) clear-view rotating window Multi-jet unit at universal head, switchable from coolant to air (max. 6 bar / 90 psi) (6 water jets, 4 air jets) pump
  NC rotary table with pallet changer	Type of Measuring system Direct measuring system
  	Table surface 1400 x 1600 mm
  Cabine	Full protection cabin
  	4. Axes (swivelling range) 360 x 0,001 degree
  	Rotation speed max.4. Axis 10 rpm
  	Number of Slots 9
  	Slot width 22 mm
  	Maximum load (table centre) 3500 Kg
  	Centre bore 100H6 mm
  Uni. head with controlled B-axis	Universal milling head with controlled B-axis SK 50 (only with motor spindle SK 50)
  Motor spindle 12,000 rpm 44 kW	Motor spindle Spindle speed 20 - 12,000 min-1 Output 44 kW / 32 kW (59 hp / 43 hp) Torque 288 Nm / 187 Nm (212 ft lbs / 137 ft lbs) (40 / 100 % duty cycle)
  Spindle taper HSK-A 100	Spindle taper for HSK-A 100 to DIN 69893 (incl. taper cleaning, adaptation working spindle, tool changer and tool magazine)
  Tool magazine,chain,120 pockets	Tool magazine chain magazine with 120 magazine pockets SK 50 or optionally chosen spindle taper
  Infrared measuring probe Renishaw	Infrared measuring probe Type Renishaw OMP 60 SK 50 or optionally chosen spindle taper
  3D quickSET	3D quickSET Tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations (only together with option measuring probe)
  Tool measuring in machining area Blum Laser NT-Hybrid	Tool measuring in machining area Type Blum Laser NT-Hybrid automatic retraction of the measuring unit in a protected housing
  Spray pistol with pump	Spray pistol with pump 1 bar/40 l/min 14.5 psi/10.4 gallon/min (theoretical pump performance)
  Oil and emulsion mist separator	Oil and emulsion mist separator electrostat filter
  Cooling	Cooling by air blast through spindle centre, selection with M function
  Operation mode 4	Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area Release after completed check list
  Special equipment	1 pallet in standard version, 1 pallet in special design as follows: T-slot spacing 100 mm and Mounting holes diameter 32H7 25mm deep with 100 grid one each Row longitudinally and transversely

• State

  Used