DMC 80 FD duoBLOCK (Reference-Nr. 130078)

•  
  Reference number 130078

  Manufacture Year 2022

  Operation Hours not applicable

• Vendor

  DMG MORI EMEA Holding GmbH
  Walter-Gropius-Str.7
  80807 München

  Germany

  

• Main Category

  Metal working machines

• Category

  Machining centres

• Type of Machine

  Machining centres (Universal)

• Manufacturer

  DMG MORI

• Control

  Heidenhain

• Description

  
  

  General
  Universal milling and turning machining centre with duoBLOCK construction; Control: CELOS with Heidenhain TNC 640
  Technical Data
  Feed rate longitudinal/transverse/vertical	60000/60000/60000 mm/min
  Rapid traverse longitudinal/transverse/vertical	60/60/60 m/min
  Tool changer
  Type of magazine	Wheel
  Application	Universal
  Tool changer plane	horizontal
  Number of tools	123
  Type of gripper	Double gripper
  Working area 1
  Longitudinal	800 mm
  Cross	1050 mm
  Vertical	850 mm

• Specification

  
  

  Uni milling head with controlled B axis HSK-A 63	Universal milling head with controlled B axis HSK-A 63 Continuously positioning universal milling head (B axis) with integrated motor spindle for 5 axes positioning and simultaneous machining
  NC mill-turn table with pallet	NC mill-turn table with pallet number of T-slots: - 1x cross slot 14 H7 / 0.55 H7 - 12x star slots 14 H11 / 0.55 H11 / 22.5° max. table speed milling operation: 30 rpm turning operation: 800 rpm integrated balancing sensor Pallet changer for 2 pallets
  	Type of Measuring system Direct measuring system
  	Table surface Ø 800 x 630 mm
  	Centre bore 50 mm
  	Maximum load (table centre) 1400 Kg
  	4. Axes (swivelling range) 360 x 0,001 degree
  Prod. package 40 bar/23 l/min	Coolant through spindle centre form AD 80 bar clear-view rotating window Multi-jet unit at universal head, switchable from coolant to air (max. 6 bar / 90 psi) (6 water jets, 4 air jets) pump output: 40 l/min / 10.4 gallon/min at 4 bar / 58 psi 300 l/min
  Chip removal	2 worm conveyors in the machine bed convey into a cross conveyor (jointed-band conveyor) with interval control (suitable for long-chipping material). discharge height: 950 mm / 37.4 in
  Integrated motor spindle speedMASTER®	Drive power (100% DC) 25 kW
  	Drive power (40% DC) 35 kW
  	Torque (100% DC) 86 Nm
  	Torque (40% DC) 130 Nm
  	Speed range - 15000 rpm
  	Spindle taper HSK-A 63
  Taper cleaning brushes	Taper cleaning unit with rotating brushes for spindle taper HSK
  Stop block + 3-point-support	Stop block + 3-point-support Design according to DECKEL MAHO Standard
  Tool magazine, wheel, 123 pockets HSK-A 63	Tool magazine wheel magazine (2 wheels) with 123 tool pockets HSK-A 63
  Operation panel for loading station tool magazine	Control panel for loading station tool magazine with TFT screen 15” Input on touch screen Windows 10 IoT Enterprise LTSB - 64 bit
  Infrared measuring probe Renishaw HSK-A 63	Infrared measuring probe Type Renishaw OMP 60 HSK-A 63
  VCS Complete extension package	VCS Complete extension package for each further machine: software / password (only in conjunction with option measuring probe or existing set of measuring tools)
  Tool measuring in machining area Blum Laser FD	Tool measuring in machining area Blum Laser DIGILOG Automatic retraction of measuring device in a protective housing, Laser-system for milling tools, 3D touch-probe for turning tools
  3D quickSET extension package	3D quickSET extension package for each further machine: software / password (only together with option measuring probe and existing set of measuring tools)
  ICS 80 bar,frequency controlled	Internal coolant supply, frequency controlled 10 bar/37l/min - 80 bar/31 l/min - 145 psi/9.7 gpm - 1,160 psi/8.2 gpm through spindle centre (AD) (theoretical pump performance) Stepless pressure programming by NC program
  Sensor package i4.0	Sensor package i4.0: MPC Machine Protection Control SGS Spindle Growth Sensor ICS flow sensor
  rotoLENS - milling head camera	rotoLENS - Camera with rotating lens integrated in the milling head Visualization via CELOS and HDMI Digital zoom and recording function
  proTIME	proTIME Visualisation of the remaining runtime, remaining workpieces and the machine state
  Tool identification (TDS)	Tool identification (Tool Dialogue System TDS) Type Balluff, data carrier BIS C-122-04/L Reading writing station at the tool magazine Reading/Writing manually, contactless with chip
  Cooling	Cooling by air blast through spindle centre, selection with M function
  Control cabinet lighting with power outlet	Control cabinet lighting with power outlet Lighting in the control cabinet with motion sensor power outlet 230V - 10A (Type F - Schuko) Other types of outlet on request Connected before the main switch (for this the customer must provide a loadable neutra
  Interpolation turning	Interpolation turning Turning-recessing cycle Manufacture of simple sealing surfaces and grooves using Machining Centres. For Siemens control only in horizontal and vertical plane
  ATC (Application Tuning Cycle)	ATC (Application Tuning Cycle) programmable feed parameter selection for machining task: accuracy/ surface/ speed
  Operation mode 4	Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area. Release after completed check list
  1 Additional set of documents in paper form	1 additional set of documents: operating and programming instructions in paper form
  Digital Manufacturing Package	Digital Manufacturing Package (1) IoTconnector Allows the use of the Online services from DMG MORI (2) Machine Data Connector (MDC) Standardized machine data interface Protocols: OPCUA, MTConnect, MQTT (3) NETservice Qualified support through internet-b
  Messenger V4	The latest version of DMG MORI Messenger displays web based the machine live status. It allows to analyze the machine run-time, downtime, alarms in individually configurable dashboards and transparently shows the actual status in the manufacturing shop
  Service Agent	Service Agent Overview of all maintenance work on the machine
  Special equipment	- ONLY with TNC640 Gen 3 with function safety! - For Heidenhain control Probe package for ridges and grooves consisting of calibration unit, additional probe with L-probe insert, Control extension and measuring cycles.
  Special equipment	Oil mist separator

• State

  Used