DMU 50 (Reference-Nr. 011204)

•  
  Reference number 011204

  Manufacture Year 2026

  Operation Hours not applicable

• Vendor

  DMG MORI EMEA Holding GmbH
  Walter-Gropius-Str.7
  80807 München

  Germany

  

• Main Category

  Metal working machines

• Category

  Machining centres

• Type of Machine

  Machining centres (Universal)

• Manufacturer

  DMG MORI

• Control

  Siemens

• Description

  
  

  General
  Universal Milling Machine; Control: CELOS X with Siemens 840D SL Operate
  Working area 1
  Longitudinal	650 mm
  Cross	520 mm
  Vertical	475 mm
  Technical Data
  Type of main drive	AC
  Drive power (100% DC)	16 kW
  Speed range	20 - 15000 rpm
  Drive power (40% DC)	21 kW
  Spindle taper	HSK-A 63
  Clamping System	HSK-A 63
  Feed rate longitudinal/transverse/vertical	-42000/-42000/-42000 mm/min
  Rapid traverse longitudinal/transverse/vertical	42/42/42 m/min
  Floor space/Weight
  Dimensions (L x W x H)	2,85 x 2,35 x 2,75 m
  Weight approx.	7500 Kg

• Specification

  
  

  Direct measuring system	Direct path measuring system
  Toolchanger	toolchanger
  	Type of magazine Chain
  	Type of gripper Double gripper
  	Number of tools 60
  	Max. tool weight 8 Kg
  	Max. tool length 300 mm
  Benefit Package	Benefit Package consisting of: Swarf conveyor, with cleaned slot screen Internal coolant supply 40bar/600l Air blast through spindle centre Application Tuning Cycle 3D quickSET (pre selection, measuring probe)
  	Max. tool dia. with free neighbouring pockets 130 mm
  	Max. tool diameter with occupied adjacent pockets 80 mm
  Spindle speed 15,000 rpm	Motor spindle speedMASTER® HSK-A63 Spindle speed 20 - 15,000 min-1 Output 21 kW / 16 kW (28 hp / 21.5 hp) Torque 111 Nm / 85 Nm (82 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)
  NC swivel rotary table	Swivel Rotary Table for simultaneous machining Clamping surface dia. 630 x 500mm / 24.8 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring system for B- and C-axis and working plane transformation
  Version Rotary joint, 4 channels, outside of table	Rotary joint connections on the face side for pneumatics or hydraulics in rotary table with swivel axis, 4 channels version Media connection on the face side of the table
  Rotary joint, 4 channels, (single option)	Rotary joint 4 channels as single Option; Execution of the option depending on the selection the rotary joint version; Not in connection with one Automation interface or clamping option selectable
  Tool magazine 60 pockets	Tool magazine 60 places HSK-A63 Vertical chain with double gripper incl. set up station for tool loading
  Swarf conveyor, with cleaned slot screen	Swarf conveyor, scraper type with cleaned slot screen
  Internal coolant supply 40bar/600l	Internal coolant supply (ICS) with paper type filter, 40 bar/23 l/min / 600-l tank 580 psi/6 gallon/min /160 gallon incl. cabin roof, rotary joint in spindle, double cartridge filter 50µm for internal coolant (differently from standard)
  Coolant-air blast change-over	Coolant - Air-blast changeover external switchable via M-Function
  Air blast through spindle centre	Air blast through spindle centre activated by M function, maintained air with low oil rate
  Chip flushing for working area	Chip flushing for working area rinsing line on the right side panel, backside of machine bed, cabin left and right activated or deactivate by M function's (only in combination with internal coolant supply, not with 20 bar ICS)
  Rotating clear-view window	Rotating clear-view window (only available with option cabin roof)
  Oil- and emulsion mist separator mechanical	Oil and emulsion mist separator mechanical filter system 1100 m³/h (only available with option cabin roof)
  Infrared measuring probe PP60 optical	Infrared touch Probe make Renishaw PP 60 optical (OMP 60)
  Laser tool measuring BLUM DIGILOG	Laser tool measuring Blum DIGILOG fix mounted at machine column modified construction, note interference contour! Tool lenght and diameter measuring automatically cleaning through external airblast Calibration tool with taper
  3D Quick SET	3D quickSET Tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations (only with option touch probe)
  MPC - Machine Protection Control	MPC - Machine Protection Control Machine protection by quick shutdown
  Signal lamp 4-colour	Signal lamp, 4 colours
  ATC (Application Tuning Cycle)	ATC (Application Tuning Cycle) programmable feed parameter selection for machining task: accuracy/surface/speed
  3D data model	3D data model in STEP format for integration in CAD System by the customer. It is used for machine simulation. (shipping against signed non disclosure agreement)
  Messenger V4	The latest version of DMG MORI Messenger displays web based the machine live status. It allows to analyze the machine run-time, downtime, alarms in individually configurable dashboards and transparently shows the actual status in the manufacturing shop

• State

  Used