DMU 65 monoBLOCK (Reference-Nr. 011187)

•  
  Reference number 011187

  Manufacture Year 2025

  Operation Hours not applicable

• Vendor

  DMG MORI EMEA Holding GmbH
  Walter-Gropius-Str.7
  80807 München

  Germany

  

• Main Category

  Metal working machines

• Category

  Machining centres

• Type of Machine

  Machining centres (Universal)

• Manufacturer

  DMG MORI

• Control

  Siemens

• Description

  
  

  General
  Universal Machining Centre in monoBLOCK construction; Control: CELOS with Siemens 840D sl Operate
  Technical Data
  Rapid traverse longitudinal/transverse/vertical	40/40/40 m/min
  Feed rate longitudinal/transverse/vertical	40000/40000/40000 mm/min
  Working area 1
  Longitudinal	735 mm
  Cross	650 mm
  Vertical	560 mm
  Tool changer
  Tool changer plane	vertical
  Type of gripper	Double gripper
  Number of tools	60
  Max. tool length	315 mm
  Max. tool diameter with occupied adjacent pockets	80 mm
  Max. tool dia. with free neighbouring pockets	160 mm
  Floor space/Weight
  Weight approx.	14500 Kg

• Specification

  
  

  NC swivel rotary table integrated in rigid table	Type of Measuring system Direct measuring system
  	Table surface 800 x 650 (Ø 650) mm
  	5. Axes (swivelling range) +120/-120 x 0,001 degree
  	4. Axes (swivelling range) 360 x 0,001 degree
  	Rotation speed max.4. Axis 40 rpm
  	Distance between T-Slots 63 mm
  	Number of Slots 9
  	Slot width 14 mm
  	Maximum load (table centre) 600 Kg
  	Centre bore 50 mm
  	Rotation Speed 5. Axis 20 rpm
  Direct measuring system	Direct path measuring system
  Cabine	Full protection cabin
  Motor spindle 20,000 rpm	Motor spindle speedMASTER® SK 40 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)
  Tool magazine, chain vert., 60 pockets	Tool magazine Vertical chain magazine basic with 60 magazine pockets SK 40 or optionally chosen spindle taper
  Infrared measuring probe Renishaw	Infrared measuring probe Type Renishaw OMP 60 SK 40 or optionally chosen spindle taper
  Production package 40 bar/23 l/min, 600 l tank	Production package: Scraper flight conveyor with coolant unit 600 l / 160 gallon, paper band filter Discharge height: 950 mm / 37.4 in Width: 670 mm / 26.4 in Internal coolant supply 40 bar/23 l/min / 580 psi/6 gallon/min through spindle centre (AD) Exter
  Automation Interface PH CELL 300 SCHUNK / ZIMMER	Automation interface PH 150 / PH CELL 300 for SCHUNK / ZIMMER zero-point clamping system consisting of: - Interface (Profibus) via M65 - Working table with 4-channel rotary transmission - Automatic lifting door - Control of SCHUNK (NSE VERO-S)/ ZIMMER (SP
  Operation mode 4	Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area Release after completed check list
  3D data model	3D data model in STEP format for integration in a CAD system by the customer. It is used for machine simulation. (Data basis in component structure)
  Digital Manufacturing Package	Digital Manufacturing Package (1) IoTconnector Allows the use of the Online services from DMG MORI (2) Machine Data Connector (MDC) Standardized machine data interface Protocols: OPCUA, MTConnect, MQTT (3) NETservice Qualified support through internet-b
  Service Agent	Service Agent Overview of all maintenance work on the machine
  Special equipment	P-K0772 MPC- Machine Protection Control

• State

  Used