AMADA HFE 80-25

•  
  Reference number 1073-97067

  Manufacture Year 1999

  Operation Hours not applicable

• Vendor

  Frech GmbH
  Werderstrasse 82
  74889 Sinsheim

  Germany

  

• Main Category

  Metal working machines

• Category

  Sheet Metalforming machines

• Type of Machine

  Pressbrakes

• Manufacturer

  AMADA

• Technical data

  pressure

  080 t

  chamfer lenght

  2570 mm

  distance between columns

  2125 mm

  column arm

  420 mm

  table width

  60.0 mm

  ajustment speed

  100 mm/sec

  working feed

  10.0 mm/sec

  return speed

  100 mm/sec

  stroke

  200 mm

  dayligth

  470 mm

  table height

  960 mm

  Number of working hours

  ~ 33.100 h

  oil volume

  90.0 l

  total power requirement

  9.0 KW

  weight of the machine ca.

  5750 kg.

  range L-W-H

  3630 x 2450 x 2550 mm

• Description

  Equipment:
  - AMADA CNC control, model OPERATEUR II
  * Manual control for fine adjustment of the axes
  - CNC control OPERATEUR 2 in 8 axes (X1 X2,Y1 Y2,R1 R2,Z1 Z2)
  - CNC-controlled backgauge adjustment (X1 X2)
  - CNC-controlled vertical adjustment of the fence fingers (R1 R2)
  - CNC-controlled adjustment of the stop fingers left-right (Z1 Z2)
  - Swivel operation, front left
  - 1x freely movable foot switch
  - Top tool holder with top wedge crowning (AMADA system)
  - Rear safety guard (safety grid)
  - Side safety guard (safety doors)
  - CE marking
  - Original operating instructions
  
  * Further technical data :
  
  Adjustment range :
  X axis ... 700 mm
  X axis with workpiece in place ... 1020 mm
  R axis .. 250 mm
  
  Adjustment speed :
  X axis .. 500 mm/sec
  R axis ... 160 mm/sec
  Z1 Z2 axis .. 1000 mm/sec
  
  Positioning accuracy ± in mm :
  X axis .. 0.1
  R axis .. 0.1
  Z axis .. 1.0
  
  
  This ad was created with MODUL MWS - the software solution of LogoTech.

• State

  Used