ATLANTIC HPT-30-150

•  
  Reference number 1073-97068

  Manufacture Year 2002

  Operation Hours not applicable

• Vendor

  Frech GmbH
  Werderstrasse 82
  74889 Sinsheim

  Germany

  

• Main Category

  Metal working machines

• Category

  Sheet Metalforming machines

• Type of Machine

  Pressbrakes

• Manufacturer

  ATLANTIC

• Control

  ATL 550

• Technical data

  pressure

  150 t

  chamfer lenght

  3100 mm

  distance between columns

  2600 mm

  throat

  250 mm

  dayligth

  325 mm

  piston stroke

  120 mm

  table height

  875 mm

  ajustment speed

  70.0 mm/sec

  working feed

  9.0 mm/sec

  return speed

  60.0 mm/sec

  pressure

  220 bar

  Control

  ATL 550

  total power requirement

  5.6 kW

  weight

  8400 kg

  range L-W-H

  3500 x 1700 x 2240 mm

• Description

  ** from a maintenance workshop
  ** very good / well-maintained condition (!!)
  
  Equipment:
  - simple NC electro-hydraulic press brake
  * with torsion shaft
  - ATLANTIC NC control ATL 550
  * Positioning of the backgauge (X)
  * Positioning of the depth adjustment (Y1 Y2)
  * Possibility of programming different programs
  * Memory capacity max. 200 programs - max. 400 blocks
  * Swivel control panel, front left
  - NC electro-motorized backgauge (X axis)
  * 2x manually adjustable stop fingers
  - 1x set of split roe foot upper tools
  - 1x rotating universal die block
  - 1x freely movable 2-hand/foot control
  - Safety guard on the side behind the machine
  - Operating instructions Circuit diagram
  
  
  This ad was created with MODUL MWS - the software solution of LogoTech.

• State

  Used