UNGERER 22002517

•  
  Reference number 1073-60204

  Operation Hours not applicable

• Vendor

  Frech GmbH
  Werderstrasse 82
  74889 Sinsheim

  Germany

  

• Main Category

  Metal working machines

• Category

  Sheet Metalforming machines

• Type of Machine

  Sheet-straightening machines

• Manufacturer

  UNGERER

• Technical data

  material width

  2100 mm

  material thickness

  2,50 mm

  no. of straightening rolls

  17

  sheet thickness - min.

  0,50 mm

  diam. of the rolls ca.

  55 mm

  between stands ca.

  2200 mm

  barrel length ca.

  2260 mm

  straight. speed ca.

  14 m/ min

  straightening rolls - bronze bearings

  ja / yes

  total power requirement

  33 kW

  weight of the machine ca.

  ca. 12,00 t

  dimensions of the machine ca.

  4,50 x 1,55 x 2,40 m

• Description

  - Drive power - main drive 30 kW
  - Height adjustment: electric motor
  - Tilting device: electric motor - temporarily connected at FRECH
  - Crowning (support adjustment (bottom) mechanical/manual) and individually adjustable
  - Central grease lubrication of the straightening roller bearing strips
  - Oil circulation lubrication of gearbox and drive shafts
  - Control cabinet not connected at FRECH
  - 9-point upper supports with support rollers
  - 9-point lower supports with support rollers
  - Reversible
  - Straightening machine has a 200 mm bar - steel frame available at extra cost
  - Roller spacing vertically 35 mm
  - Control unit missing
  - Straightening machine is temporarily connected - customer must complete electrical work
  - Box with complete set of used straightening rollers
  Diameter of straightening rollers 54.7 mm included
  
  
  This ad was created with MODUL MWS - the software solution of LogoTech.

• State

  Used