DECKEL S11

•  
  Reference number 1035-04404

  Manufacture Year 1989

  Operation Hours not applicable

• Vendor

  Schmeisser Werkzeugmaschinen
  Lochfelbenstr. 2
  89312 Günzburg

  Germany

  

• Main Category

  Metal working machines

• Category

  Tool grinding machines

• Type of Machine

  Tool grinding machines

• Manufacturer

  DECKEL

• Technical data

  max. grinding diameter

  238 - 620 mm

  grinding length

  190 mm

  workpiece length

  380 - 940 mm

  spindle turning speed - stepless

  2 - 10000 U/min

  current capacity

  380 kVA

  power capacity - grinding motor

  1,1 kW

  total power requirement

  2,2 kW

  weight of the machine ca.

  0,6 t

  Mechanic: very good

  Optical condition: very good

  The machine can be viewed under current.

• Description

  !!! We have almost all spare parts for the Deckel S 11 machines in stock !!!
  
  !!! Accessories can be varied as desired !!!
  
  We would be happy to trade in your used Deckel S 11 - contact us!
  
  Notice:
  We would be happy to provide you with a free offer. However, please understand
  that we only accept inquiries with a complete address
  edit.
  
  
  1218
  400 V, 50 Hz, with CEE plug and cable
  
  Colour: light grey RAL 7035
  Stand traffic grey RAL 7042 (new paint)
  
  axial grinding spindle adjustment
  
  Accessories:
  
  * Machine stand and carrier plate ground
  
  * Complete electrical conversion included:
  
  > new three-phase drive
  > new brake motor
  > new frequency controller
  > new built-in electrics touch-proof
  > Fi circuit breaker
  > EMC cables and screwed connections
  > new protective cables
  > new control panel
  > Emergency stop switch
  
  * Opto electronic measuring device with microscope, support arm, parking space,
  new 2-axis Fagor digital readout and scales completely mounted and adjusted
  
  * dividing head Sk 40 with prisms and 24 R dividing disc
  * 1 graduated disc 14 + 22 R each
  * Twist and back-grinding device with rack and pinion housing
  * Setting gauge
  * Complete tooth support
  * pivoting support finger
  * LED lamp waldmann
  * Dust extraction device without vacuum cleaner
  * Univ. adjustment gauge
  * 10 direct collets Sk 40 6/ 8/ 10/ 12/ 14/ 16/ 18/ 20 22/ 25 mm
  * Collet sleeve with forcing nut
  * 1 set = 35 collets S 20x2 from 1.0 - 18.0 mm by 0.5 mm each
  * 1 taper reducing sleeve Sk 40 x Mk 1/ 2/ 3/ 4
  * 3 grinding wheel chuck L 48, 35 mm
  * Protective cover
  * Exchange grinding spindle
  * Tool cabinet with 4 drawers
  * Shelves for dto.
  * Operating key, operating instructions, spare parts list, circuit diagram
  
  * Machine and accessories completely overhauled and with electrical test
  certificate!*
  6 months warranty !
  
  
  This ad was created with MODUL MWS - the software solution of LogoTech.

• State

  Used